Commit 5df81317 forgot to adjust a few
callers of virStrToLong_ui to ignore the returned value in some ancient
parts of the code.

We do so in the vast majority of places, so there's no problem of adding
the attribute to enforce it by the complier and fix a few leftover
places.

This was originally pointed out by Coverity as a recent change triggered
it's warning that our code checked the vast majority of returns from
virStrToLong_ui.

Use the virTypedParamsFree unconditionally as it handles NULL well and
has the benefit of freeing a typed parameter array even if it wasn't yet
assigned, but only allocated.

max_id could be used uninitialized in the cleanup section after the
domain wasn't found.

Discovered by Coverity.

Report errors on some states snapshots done by qemu should never reach

Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.

The logic of the code is preserved until later patches.

Try to reconnect to the running domains after libvirtd restart. To
achieve that, do:

 * Save domain state
  - Modify virBhyveProcessStart() to save domain state to the state
    dir
  - Modify virBhyveProcessStop() to cleanup the pidfile and the state

 * Detect if the state information loaded from the driver's state
   dir matches the actual state. Consider domain active if:
    - PID it points to exist
    - Process title of this PID matches the expected one with the
      domain name

   Otherwise, mark the domain as shut off.

Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE
didn't set proctitle we expect, so the current code will not detect
it. I don't plan adding support for this unless somebody requests
this.

libvirt supports pci domain already, so update the documentation.
Otherwise users who lookup the documentation for how to use hostdev may
miss the domain and encounter error when pass-through a pci device in a
domain other than 0.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368

Disk type 'lun' enables SCSI command passthrough for a disk. We stated
that it works only with "block" disks. Qemu supports it also when using
the iSCSI protocol.

There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?

It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.

Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There's no need to use it since we have this shiny functions
that even checks for conversion and overflow errors.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:

    <interface type='network'>
      <source network='default'/>
      <guest dev="eth1"/>
    </interface>

In this example the network card will appear as eth1 in the guest.

Decisions whether qemu driver and libvirt-daemon-{qemu,kvm} packages
should be built on various OS/arch combinations were scattered around
the spec file. Let's make it easier to see where qemu driver is going to
be built.

https://bugzilla.redhat.com/show_bug.cgi?id=1091866

Add a new boolean 'sparse'.  This will be used by the logical backend
storage driver to determine whether the target volume is sparse or not
(also known by a snapshot or thin logical volume). Although setting sparse
to true at creation could be seen as duplicitous to setting during
virStorageBackendLogicalMakeVol() in case there are ever other code paths
between Create and FindLVs that need to know about the volume be sparse.

Use the 'sparse' in a new virStorageBackendLogicalVolWipe() to decide whether
to attempt to wipe the logical volume or not. For now, I have found no
means to wipe the volume without writing to it. Writing to the sparse
volume causes it to be filled. A sparse logical volume is not completely
writeable as there exists metadata which if overwritten will cause the
sparse lv to go INACTIVE which means pool-refresh will not find it.
Access to whatever lvm uses to manage data blocks is not provided by
any API I could find.

Rather than a unsigned int, use a 'bool' since that's how it was used.

Update the VSphere version comment in esx_vi.c for ESX 5.1 and 5.5.

Commit 93e82727 introduced numatune_conf.h file that contains
typedefs already defined in domain_conf.h, such as:

 - virDomainNumatune
 - virDomainNumatunePtr
 - virDomainDef
 - virDomainDefPtr

As numatune_conf.h is included by domain_conf.h, clang
complains about redefinition of typedef and the build fails.

In order to fix it, drop typedefs already defined by numatume_conf.h
from domain_conf.h.

Commit id '0e2d7305' modified the code to allow a negative value to be
supplied for the bandwidth argument of the various block virsh commands
and the migrate-setspeed; however, it failed to update the man page to
describe the "feature" whereby a very large value could be interpreted
by the hypervisor to mean maximum value allowed. Although initially
designed to handle a -1 value, the reality is just about any negative
value could be provided and essentially perform the same feature.

https://bugzilla.redhat.com/show_bug.cgi?id=1087104

Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.

However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file.  Providing other negative values resulted in errors such as:

$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
  --offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument

$

Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op.  Therefore,
disallow a negative value for offset.

Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.

Test also the TITLE and DESCRIPTION metadata types.

Coverity complains about the return value of ioctl not being checked.

Even though we carry on when this fails (just like qemu-img does),
we can log an error.

For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710

The next patch will move the storage volume wiping code into the
individual backends. This patch splits out the common code to wipe a
local volume into a separate backend helper so that the next patch is
simpler.

The previous commit 09d4d261 put the interleave at the wrong point;
it didn't allow interleaving with <memory>.

* docs/schema/domaincommon.rng (numatune): Fix interleave location.
* tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode.xml: Adjust test.
Signed-off-by: NEric Blake <eblake@redhat.com>

For ESX, the code that builds XML descriptions for attached storage pools was
not setting the host count to anything when it returned a host name.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails.  This is because cgroup restrict even kernel
allocations.  We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.

This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether.  That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated.  QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch.  One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification.  This
will be used in later patch.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The numa patch series in qemu adds "memory-backend-ram" object type by
which we can tell whether we can use such objects.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways.  On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).

In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:

s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g

then shrunk long lines, and mainly functions, that were created after
that:

sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'

And to cope with the enum name, I haad to change the constants as
well:

s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g

Last thing I did was at least a little shortening of already long
name:

s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>