- 08 4月, 2011 10 次提交
-
-
由 Stefan Berger 提交于
This patch adds support for the evaluation of TCP flags in nwfilters. It adds documentation to the web page and extends the tests as well. Also, the nwfilter schema is extended. The following are some example for rules using the tcp flags: <rule action='accept' direction='in'> <tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/> </rule> <rule action='drop' direction='in'> <tcp state='NONE' flags='SYN/ALL'/> </rule>
-
由 Taku Izumi 提交于
This patch adds the new option (--current) to the "virsh setmem" command. When --current option is specified, it affects a "current" domain. The word "current" denotes that if a domain is running, it affects a running domain only; otherwise it affects a persistent domain. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Taku Izumi 提交于
This patch adds virDomainSetMemoryFlags(,,VIR_DOMAIN_MEM_CURRENT) support code to qemu driver. Also, change virDomainObjIsActive to return bool, given its usage. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Taku Izumi 提交于
This patch introduces VIR_DOMAIN_MEM_CURRENT flag and modifies virDomainSetMemoryFlags function to support it. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Jim Fehlig 提交于
Add $localstatedir/log/libvirt/libxl when building libxenlight driver
-
由 Taku Izumi 提交于
When the new maximum memory size becomes less than the current memory size, I think it is not the libvirt client but the each driver that decides the behavior (reject the operation or shrink the current memory size). Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Eric Blake 提交于
* .gnulib: Update to latest, for pipe2. * bootstrap.conf (gnulib_modules): Add pipe2. * src/util/event_poll.c (virEventPollInit): Use it, to avoid problematic virSetCloseExec on mingw.
-
由 Eric Blake 提交于
Make it so we don't have to 'git add -f' particular files like po/POTFILES.in all the time (tested by fixing one of our special-case files as part of the patch). * .gnulib: Update to latest. * bootstrap: Resync from coreutils. * .gitignore: Sort whitelist entries correctly, including ignoring files rather than directories. * m4/virt-compile-warnings.m4: Convert tabs to space.
-
由 Laine Stump 提交于
It was just pointed out that, although I added documentation for the IPv6 additions to the network XML, I neglected to use those additions in the examples. This patch adds an IPv6 address to each of the examples except for the "default" network, since that is a faithful reproduction of the default network config that's automatically installed, which doesn't include any IPv6 address (for good reason - because there is no such thing as IPv6 NAT, there is no one IPv6 address that would work for all installations).
-
由 Markus Groß 提交于
Libxenlight currently only supports the credit scheduler. Therefore setting or getting a parameter of other schedulers raise an error (for now).
-
- 07 4月, 2011 11 次提交
-
-
由 Osier Yang 提交于
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to restore the domain from managedsave'ed image if it exists (by invoking "qemuDomainObjRestore"), but it unlinks the image even if restoring fails, which causes data loss. (This problem exists for "virsh managedsave dom; virsh start dom"). The fix for is to unlink the managed state file only if restoring succeeded. 2) For "virsh save dom; virsh restore dom;", it can cause data corruption if one reuse the saved state file for restoring. Add doc to tell user about it. 3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't fallback to start the domain, skipping it to cleanup as a incidental fix. Discovered by Eric.
-
由 Wen Congyang 提交于
Reattach all pci devices that we detached when qemuPrepareHostdevPCIDevices() failed.
-
由 Wen Congyang 提交于
We should bind pci device to original driver when pciBindDeviceToStub() failed. If the pci device is not bound to any driver before calling pciBindDeviceToStub(), we should only unbind it from pci-stub. If it is bound to pci-stub, we should not unbind it from pci-stub.
-
由 Wen Congyang 提交于
This patch do the following things: 1. rename the function as 'Unbind' is better than 'UnBind'. 2. pciUnbindDeviceFromStub() will be used in the function pciBindDeviceToStub() in next patch. Float it up, instead of having to have a forward declaration
-
由 Wen Congyang 提交于
We should not mark pci devices as active when qemuPrepareHostdevPCIDevices() failed.
-
由 Wen Congyang 提交于
This bug was introduce by commit 57162db8, and it will cause libvirtd crashed.
-
由 Eric Blake 提交于
In file included from util/threads.c:31: util/threads-pthread.c: In function 'virThreadSelfID': util/threads-pthread.c:214: warning: cast from function call of type 'pthread_t' to non-matching type 'int' [-Wbad-function-cast] * src/util/threads-pthread.c (virThreadSelfID) [!SYS_gettid]: Add intermediate cast to silence gcc.
-
由 Markus Groß 提交于
-
由 Jim Fehlig 提交于
With gcc 4.3.4 I'm seeing the following warning failure cc1: warnings being treated as errors cc1: error: -funit-at-a-time is required for inlining of functions that are only called once [-Wdisabled-optimization] Add -funit-at-a-time to WARN_CFLAGS.
-
由 Serge Hallyn 提交于
We're seeing bugs apparently resulting from thread unsafety of libpciaccess, such as https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/726099 To prevent those, as suggested by danpb on irc, move the nodeDeviceLock(driverState) higher into the callers. In particular: udevDeviceMonitorStartup should hold the lock while calling udevEnumerateDevices(), and udevEventHandleCallback should hold it over its entire execution. It's not clear to me whether it is ok to hold the nodeDeviceLock while taking the virNodeDeviceObjLock(dev) on a device. If not, then the lock will need to be dropped around the calling of udevSetupSystemDev(), and udevAddOneDevice() may not actually be safe to call from higher layers with the driverstate lock held. libvirt 0.8.8 with this patch on it seems to work fine for me. Assuming it looks ok and I haven't done anything obviously dumb, I'll ask the bug submitters to try this patch. Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
-
由 Eric Blake 提交于
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Reflect reserved VGA port change.
-
- 06 4月, 2011 6 次提交
-
-
由 Jiri Denemark 提交于
This patch adds max_processes option to qemu.conf which can be used to override system default limit on number of processes that are allowed to be running for qemu user.
-
由 Osier Yang 提交于
To address https://bugzilla.redhat.com/show_bug.cgi?id=692355 This fix is to reserve slot 0x02 for primary VGA even if there is no "video" specified in domain XML to avoid the problem.
-
由 Eric Blake 提交于
cc1: warnings being treated as errors libxl/libxl_driver.c: In function 'libxlDomainSetVcpusFlags': libxl/libxl_driver.c:1570:14: error: cast from function call of type 'double' to non-matching type 'unsigned int' [-Wbad-function-cast] libxl/libxl_driver.c:1578:15: error: cast from function call of type 'double' to non-matching type 'unsigned int' [-Wbad-function-cast] This was the only use of floor() and ceil(), and floating-point is overkill for power-of-two manipulations. * src/libxl/libxl_driver.c (libxlDomainSetVcpusFlags): Avoid -lm for trivial computations.
-
由 Daniel P. Berrange 提交于
The systemtap directory for tapsets is called /usr/share/systemtap/tapset Not /usr/share/systemtap/tapsets * daemon/Makefile.am,libvirt.spec.in: s/tapsets/tapset/
-
由 Daniel P. Berrange 提交于
The GCC Win32 compiler will claim to support -fstack-protector, but if it actually gets triggered by a suitable code pattern, linking will fail. Other non-Linux OS likely suffer the same way with gcc. * m4/virt-compile-warnings.m4: Only use stack protector when the build target is Linux.
-
由 Daniel P. Berrange 提交于
GCC is a little confused about the cast of beginthread/beginthreadex from unsigned long -> void *. Go via an intermediate variable avoids the bogus warning, and makes the code a little cleaner * src/util/threads-win32.c: Avoid compiler warning in cast
-
- 05 4月, 2011 13 次提交
-
-
由 Daniel P. Berrange 提交于
The SCSI volumes get a better 'key' field based on the fully qualified volume path. All SCSI volumes have a unique serial available in hardware which can be obtained by sending a suitable SCSI command. Call out to udev's 'scsi_id' command to fetch this value * src/storage/storage_backend_scsi.c: Improve volume key field value stability and uniqueness
-
由 Jiri Denemark 提交于
When initializing qemu guest capabilities, we should ignore qemu binaries that we are not able to extract version/help info from since they will be unusable for creating domains anyway. Ignoring them is also much better than letting initialization of qemu driver fail.
-
由 Jiri Denemark 提交于
The macro is huge and gives us nothing but headache when maintaining it.
-
由 Daniel P. Berrange 提交于
A couple of functions were declared using the old style foo() for no-parameters, instead of foo(void) * src/xen/xen_hypervisor.c, tests/testutils.c: Replace () with (void) in some function declarations * m4/virt-compile-warnings.m4: Enable -Wold-style-definition
-
由 Daniel P. Berrange 提交于
* src/internal.h: Define a ATTRIBUTE_NO_RETURN annotation * src/lxc/lxc_container.c: Annotate lxcContainerDummyChild with ATTRIBUTE_NO_RETURN * tests/eventtest.c: Mark async thread as ATTRIBUTE_NO_RETURN * m4/virt-compile-warnings.m4: Enable -Wmissing-noreturn
-
由 Daniel P. Berrange 提交于
Add a couple of missing ATTRIBUTE_FMT_PRINTF annotations * tools/virsh.c, tests/testutils.c: Add printf format attribute * m4/virt-compile-warnings.m4: Enable -Wmissing-format-attribute
-
由 Daniel P. Berrange 提交于
Split the bit acinclude.m4 file into smaller pieces named as m4/virt-XXXXX.m4 * .gitignore: Ignore gettext related files * acinclude.m4: Delete * m4/virt-compile-warnings.m4: Checks for GCC compiler flags * m4/virt-pkgconfig-back-compat.m4: Backcompat check for pkgconfig program
-
由 Daniel P. Berrange 提交于
Remove custom code for checking compiler warnings, using gl_WARN_ADD instead. Don't list all flags ourselves, use gnulib's gl_MANYWARN_ALL_GCC to get all possible GCC flags, then turn off the ones we don't want yet. * acinclude.m4: Rewrite to use gl_WARN_ADD and gl_MANYWARN_ALL_GCC * bootstrap.conf: Add warnings & manywarnings * configure.ac: Switch to gl_WARN_ADD * m4/compiler-flags.m4: Obsoleted by gl_WARN_ADD
-
由 Daniel P. Berrange 提交于
* src/openvz/openvz_driver.c: Initialize saveptr variable
-
由 Matthias Bolte 提交于
Removes 4kb stack allocation in the XenD subdriver.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-