- 20 5月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Don't ignore virDomainSaveStatus failure. * src/conf/domain_conf.h (virDomainSaveStatus): Use ATTRIBUTE_RETURN_CHECK, so this doesn't happen again.
-
- 24 4月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 09 4月, 2010 1 次提交
-
-
由 David Allan 提交于
* Dan Kenigsberg requested explicit support for the qemu default disk error policy which is enospace
-
- 05 4月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 02 4月, 2010 2 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Laine Stump 提交于
The clock timer XML is being updated in the following ways (based on further off-list discussion that was missed during the initial implementation): 1) 'wallclock' is changed to 'track', and the possible values are 'boot' (corresponds to old 'host'), 'guest', and 'wall'. 2) 'mode' has an additional value 'smpsafe' 3) when tickpolicy='catchup', there can be an optional sub-element of timer called 'catchup': <catchup threshold=123 slew=120 limit=10000/> Those three values are all longs, always optional, and if they are present, they are positive. Internally, 0 indicates "unspecified". * docs/schemas/domain.rng: updated RNG definition to account for changes * src/conf/domain_conf.h: change the C struct and enums to match changes. * src/conf/domain_conf.c: timer parse and format functions changed to handle the new selections and new element. * src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack* * src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
-
- 01 4月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
To fix an ESX test case, valid interface names need '/' as valid letter. Signed-off-by: NStefan Berger <stefanb@us.ibm.com>
-
- 31 3月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Check that interface names only contain valid characters. Blank them out otherwise. Valid characters in this code are currently a-z,A-Z,0-9, '-' and '_'.
-
- 30 3月, 2010 1 次提交
-
-
由 Laine Stump 提交于
This extension is described in http://www.redhat.com/archives/libvir-list/2010-March/msg00304.html Currently all attributes are optional, except name. * src/conf/domain_conf.h: add data definition for virDomainTimerDef and add a list of them to virDomainClockDef * src/conf/domain_conf.c: XML parser and formatter for a timer inside a clock * src/libvirt_private.syms: add new Timer enum helper functions to symbols
-
- 27 3月, 2010 4 次提交
-
-
由 Jiri Denemark 提交于
When a domain is defined on host1, migrated to host2 and then migrated back to host1, its current configuration would overwrite the libvirtd's in-memory copy of persistent configuration of that domain. This is not desired as we want to preserve the persistent configuration untouched. This patch introduces new 'live' parameter to virDomainAssignDef. Passing 'true' for 'live' means the configuration passed to virDomainAssignDef describes a configuration of live instance of the domain. This applies for saved domains which are being restored or for incoming domains during migration. All callers have been changed to pass the appropriate value.
-
由 David Allan 提交于
* Fixes per feedback from Dan and Daniel * Added test datafiles * Re-disabled JSON flags * Added code to print the error policy attribute when generating XML * Re-add empty tag
-
由 Stefan Berger 提交于
This patch adds XML processing for the network filter schema and extends the domain XML processing to parse the top level referenced filter along with potentially provided parameters Signed-off-by: NStefan Berger <stefanb@us.ibm.com> Signed-off-by: NGerhard Stenzel <gerhard.stenzel@de.ibm.com>
-
由 Stefan Berger 提交于
To find out where the net type 'direct' needs to be handled I introduced the 'enum virDomainNetType' in the virDomainNetDef structure and let the compiler tell me where the case statement is missing. Then I added the unhandled device statement to the UML driver. * src/conf/domain_conf.h: change _virDomainNetDef type from int to virDomainNetType enum * src/conf/domain_conf.c src/lxc/lxc_driver.c src/qemu/qemu_conf.c src/uml/uml_conf.c: make sure all enum cases are properly handled in switches
-
- 26 3月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Expand the parser for the standalone <device> XML format to allow inclusion of the <graphics> device type * src/conf/domain_conf.h: Add virDomainGraphicsDef to the virDomainDeviceDef struct * src/conf/domain_conf.c: Wire up parser for virDomainGraphicsDef to virDomainDeviceDefParse method
-
- 23 3月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
Before, this function would blindly accept an invalid def->dst and then abuse the idx=-1 it would get from virDiskNameToIndex, when passing it invalid strings like "xvda:disk" and "sda1". Now, this function returns -1 upon failure. * src/conf/domain_conf.c (virDomainDiskDefAssignAddress): as above. Update callers. * src/conf/domain_conf.h: Update prototype. * src/qemu/qemu_conf.c: Update callers.
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 02 3月, 2010 3 次提交
-
-
由 Daniel P. Berrange 提交于
This extends the XML to allow for <clock offset='timezone' timezone='Europe/Paris'/> This is useful if the admin has not configured any timezone on the host OS, but still wants to synchronize a guest to a specific one. * src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra 'timezone' attribute on clock configuration * docs/schemas/domain.rng: Add 'timezone' attribute * src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs with a configurable timezone
-
由 Daniel P. Berrange 提交于
This introduces a third option for clock offset synchronization, that allows an arbitrary / variable adjustment to be set. In essence the XML contains the time delta in seconds, relative to UTC. <clock offset='variable' adjustment='123465'/> The difference from 'utc' mode, is that management apps should track adjustments and preserve them at next reboot. * docs/schemas/domain.rng: Schema for new clock mode * src/conf/domain_conf.c, src/conf/domain_conf.h: Parse new clock time delta * src/libvirt_private.syms, src/util/xml.c, src/util/xml.h: Add virXPathLongLong() method
-
由 Daniel P. Berrange 提交于
The XML will soon be extended to allow more than just a simple localtime/utc boolean flag. This change replaces the plain 'int localtime' with a separate struct to prepare for future extension * src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new virDomainClockDef structure * src/libvirt_private.syms: Export virDomainClockOffsetTypeToString and virDomainClockOffsetTypeFromString * src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c, src/xen/xm_internal.c: Updated to use new structure for localtime
-
- 19 2月, 2010 2 次提交
-
-
由 Chris Lalancette 提交于
* src/conf/domain_conf.c: make function static * src/conf/domain_conf.h: remove it from header
-
由 Matthew Booth 提交于
Add support for virtio-serial by defining a new 'virtio' channel target type and a virtio-serial controller. Allows the following to be specified in a domain: <controller type='virtio-serial' index='0' ports='16' vectors='4'/> <channel type='pty'> <target type='virtio' name='org.linux-kvm.port.0'/> <address type='virtio-serial' controller='0' bus='0'/> </channel> * docs/schemas/domain.rng: Add virtio-serial controller and virtio channel type. * src/conf/domain_conf.[ch]: Domain parsing/serialization for virtio-serial controller and virtio channel. * tests/qemuxml2xmltest.c tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml parsing test * src/libvirt_private.syms src/qemu/qemu_conf.c: virDomainDefAddDiskControllers() renamed to virDomainDefAddImplicitControllers()
-
- 18 2月, 2010 1 次提交
-
-
由 Matthew Booth 提交于
Remove virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual, which are defined but not used anywhere. * src/conf/domain_conf.[ch] src/libvirt_private.syms: Remove virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual.
-
- 16 2月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This part adds support to domain_conf.{c|h} for parsing the new interface XML of type 'direct'. The parsed mode is now stored as an int. * src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code * src/util/macvtap.h: empty header to not break compilation
-
- 10 2月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 03 2月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
The current way of assigning names to the host network backend and NIC device in QEMU was over complicated, by varying naming scheme based on the NIC model and backend type. This simplifies the naming to simply be 'net0' and 'hostnet0', allowing code to easily determine the host network name and vlan based off the primary device alias name 'net0'. This in turn allows removal of alot of QEMU specific code from the XML parser, and makes it easier to assign new unique names for NICs that are hotplugged * src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name and vlan fields from virNetworkDefPtr * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Use a single network alias naming scheme regardless of NIC type or backend type. Determine VLANs from the alias name. * tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args, tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args, tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update for new simpler naming scheme
-
由 Daniel P. Berrange 提交于
The virDomainDeviceInfoIterate() function will provide a convenient way to iterate over all devices in a domain. * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDeviceInfoIterate() function.
-
- 21 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
The 'int virInterfaceIsActive()' method was directly returning the value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield with a signed integer, will hold the values 0 and -1, not 0 and +1 as might be expected. This meant that virInterfaceIsActive() was always returning -1 when the interface was active, not +1 & thus all callers thought an error had occurred. To protect against this kind of mistake again, change all bitfields to be unsigned ints * daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h, src/conf/network_conf.h: Change bitfields to unsigned int.
-
- 18 1月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
Although the serial, parallel, chanel, input & fs devices do not have PCI address info, they can all have device aliases. Thus it neccessary to associate the virDomainDeviceInfo data with them all. * src/conf/domain_conf.c, src/conf/domain_conf.h: Add hooks for parsing / formatting device info for serial, parallel, channel input and fs devices. * docs/schemas/domain.rng: Associate device info with character devices, input & fs device
-
由 Daniel P. Berrange 提交于
This patch introduces the support for giving all devices a short, unique name, henceforth known as a 'device alias'. These aliases are not set by the end user, instead being assigned by the hypervisor if it decides it want to support this concept. The QEMU driver sets them whenever using the -device arg syntax and uses them for improved hotplug/hotunplug. it is the intent that other APIs (block / interface stats & device hotplug) be able to accept device alias names in the future. The XML syntax is <alias name="video0"/> This may appear in any type of device that supports device info. * src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias' field to virDomainDeviceInfo struct & parse/format it in XML * src/libvirt_private.syms: Export virDomainDefClearDeviceAliases * src/qemu/qemu_conf.c: Replace use of "nic_name" field with the standard device alias * src/qemu/qemu_driver.c: Clear device aliases at shutdown
-
由 Daniel P. Berrange 提交于
The PCI device addresses are only valid while the VM is running, since they are auto-assigned by QEMU. After shutdown they must all be cleared. Future QEMU driver enhancement will allow for persistent PCI address assignment * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms Add virDomainDefClearPCIAddresses() method for wiping out auto assigned PCI addresses * src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown
-
由 Daniel P. Berrange 提交于
Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already
-
- 16 1月, 2010 5 次提交
-
-
由 Wolfgang Mauerer 提交于
This augments virDomainDevice with a <controller> element that is used to represent disk controllers (e.g., scsi controllers). The XML format is given by <controller type="scsi" index="<num>"> <address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/> </controller> where type denotes the disk interface (scsi, ide,...), index is an integer that identifies the controller for association with disks, and the <address> element specifies the controller address on the PCI bus as described in previous commits The address element can be omitted; in this case, an address will be assigned automatically. Most of the code in this patch is from Wolfgang Mauerer's previous disk controller series * docs/schemas/domain.rng: Define syntax for <controller> XML element * src/conf/domain_conf.c, src/conf/domain_conf.h: Define virDomainControllerDef struct, and routines for parsing and formatting XML * src/libvirt_private.syms: Add virDomainControllerInsert and virDomainControllerDefFree
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
由 Daniel P. Berrange 提交于
Add the virDomainDeviceAddress information to the sound, video and watchdog devices. This means all of them gain the new XML element <address .... /> This brings them upto par with disk/net/hostdev devices which already have address info * src/conf/domain_conf.h: Add virDomainDeviceAddress to sound, video & watchdog device struts. * src/conf/domain_conf.c: Hook up parsing/formatting for virDomainDeviceAddress in sound, video & watchdog devices * docs/schemas/domain.rng: Associate device address info with sound, video & watchdog
-
由 Daniel P. Berrange 提交于
Introduce a new structure struct _virDomainDeviceDriveAddress { unsigned int controller; unsigned int bus; unsigned int unit; }; and plug that into virDomainDeviceAddress and generates XML that looks like <address type='drive' controller='1' bus='0' unit='5'/> This syntax will be used by the QEMU driver to explicitly control how drives are attached to the bus * src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and formatting of drive addresses * docs/schemas/domain.rng: Define new address format for drives
-
由 Daniel P. Berrange 提交于
All guest devices now use a common device address structure summarized by: enum virDomainDeviceAddressType { VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI, }; struct _virDomainDevicePCIAddress { unsigned int domain; unsigned int bus; unsigned int slot; unsigned int function; }; struct _virDomainDeviceInfo { int type; union { virDomainDevicePCIAddress pci; } addr; }; This replaces the anonymous structs in Disk/Net/Hostdev data structures. Where available, the address is *always* printed in the XML file, instead of being hidden in the internal state file. <address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/> The structure definition is based on Wolfgang Mauerer's disk controller patch series. * docs/schemas/domain.rng: Define the <address> syntax and associate it with disk/net/hostdev devices * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: APIs for parsing/formatting address information. Also remove the QEMU specific 'pci_addr' attributes * src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with new standardized format.
-
- 18 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
* include/libvirt/virterror.h src/util/virterror.c: add new domain VIR_FROM_CPU for errors * src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module * src/Makefile.am proxy/Makefile.am: include new files * src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference new code * src/libvirt_private.syms: private export of new entry points
-
- 08 12月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Now that drivers are using a private domain object state blob, the virDomainObjFormat/Parse methods are no longer able to directly serialize all neccessary state to/from XML. It is thus neccessary to introduce a pair of callbacks fo serializing private state. The code for serializing vCPU PIDs and the monitor device config can now move out of domain_conf.c and into the qemu_driver.c where they belong. * src/conf/capabilities.h: Add callbacks for serializing private state to/from XML * src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids fields from virDomainObjPtr. Remove code that serialized those fields * src/libvirt_private.syms: Export virXPathBoolean * src/qemu/qemu_driver.c: Add callbacks for serializing monitor and vcpupid data to/from XML * src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor char device config into qemuMonitorOpen directly.
-
- 23 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce a new type="dir" mode for <disks> that allows use of QEMU's virtual FAT block device driver. eg <disk type='dir' device='floppy'> <source dir='/tmp/test'/> <target dev='fda' bus='fdc'/> <readonly/> </disk> gets turned into -drive file=fat:floppy:/tmp/test,if=floppy,index=0 Only read-only disks are supported with virtual FAT mode * src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir" * docs/schemas/domain.rng: Document new disk type * src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for unsupported disk types * tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix empty disk file handling * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args, tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml, tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args, tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver * src/qemu/qemu_conf.c: Support generating fat:/some/dir type disk args * src/security/security_selinux.c: Temporarily skip labelling of directory based disks
-
- 12 11月, 2009 1 次提交
-
-
由 pritesh 提交于
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in the enum and lists of virDomainDiskBus * src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
-