The OEM strings table in SMBIOS allows the vendor to pass arbitrary
strings into the guest OS. This can be used as a way to pass data to an
application like cloud-init, or potentially as an alternative to the
kernel command line for OS installers where you can't modify the install
ISO image to change the kernel args.

As an example, consider if cloud-init and anaconda supported OEM strings
you could use something like

    <oemStrings>
      <entry>cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/</entry>
      <entry>anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os</entry>
    </oemStrings>

use of a application specific prefix as illustrated above is
recommended, but not mandated, so that an app can reliably identify
which of the many OEM strings are targetted at it.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Let's also parse the available processor frequency information on S390
so that it can be utilized by virsh sysinfo:

    # virsh sysinfo

    <sysinfo type='smbios'>
      ...
      <processor>
	<entry name='family'>2964</entry>
	<entry name='manufacturer'>IBM/S390</entry>
	<entry name='version'>00</entry>
	<entry name='max_speed'>5000</entry>
	<entry name='serial_number'>145F07</entry>
      </processor>
      ...
    </sysinfo>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
         -regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
         | xargs git grep -lP "\t"
Signed-off-by: NErik Skultety <eskultet@redhat.com>

All of the variables are filled inside a loop and therefore
needs to be also freed in every cycle.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Found by Coverity. Because there's an "if ((cur = strstr(base, "revision"))
 != NULL) {" followed by a "base = cur" coverity notes that 'base' could
then be NULL causing the return to the top of the "while ((tmp_base =
strstr(base, "processor")) != NULL) {" to have strstr deref a NULL 'base'
pointer because the setting of base at the bottom of the loop is unconditional.

Alter the code to set "base = cur" after processing each key. That will
"ensure" that base doesn't get set to NULL if both "cpu" and "revision"
do no follow a "processor".

While a /proc/cpuinfo file that has a "processor" key but with neither
a "cpu" nor a "revision" doesn't seem feasible, the code is written as if
it could happen, so we have to account for it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Calls to virFileReadAll after a VIR_ALLOC that return NULL all show
a memory leak since 'ret' isn't virSysinfoDefFree'd and normal path
"return ret" doesn't free outbuf.

Reported by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

virSysinfoSetup should be used only in tests so it can be moved to the
new header file rather than using an extern declaration.

Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1220527

This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A variable can't be named system, obviously. Well, it can if the
compiler is new enough to distinguish a variable named system and a
function call system(). And some older systems, don't have wise
compiler.

  CC     util/libvirt_util_la-virsysinfo.lo
cc1: warnings being treated as errors
../../src/util/virsysinfo.c: In function 'virSysinfoParseSystem':
../../src/util/virsysinfo.c:649: error: declaration of 'system' shadows a global declaration [-Wshadow]
/usr/include/stdlib.h:717: error: shadowed declaration is here [-Wshadow]
make[3]: *** [util/libvirt_util_la-virsysinfo.lo] Error 1
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move all the system_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move all the bios_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If the <sysinfo type='smbios'...> ends up not formatting any sub-elements,
then rather than formatting as:

  <sysinfo type='smbios'>
  </sysinfo>

Just format it more cleanly as:

  <sysinfo type='smbios'/>
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Due to a kernel commit (b4b8f770e), cpuinfo format has changed on
ARMs. Firstly, 'Processor: ...' may not be reported, it's
replaced by 'model name: ...'. Secondly, the "Processor" string
may occur in CPU name, e.g. 'ARMv7 Processor rev 5 (v7l)'.
Therefore, we must firstly look for 'model name' and then for
'Processor' if not found.
Moreover, lines in the cpuinfo file are shuffled, so we better
not manipulate the pointer to start of internal buffer as we may
lost some info.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

VIR_STRDUP plays nicely with NULLs. Theres no need to guard its
call with check for non-NULL.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On a system with 160 CPUs the /proc/cpuinfo size grows beyond
the currently set limit of 10KB causing an internal error.

This patch increases the buffer size to 1MB.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Replace:
if (virBufferError(&buf)) {
    virBufferFreeAndReset(&buf);
    virReportOOMError();
    ...
}

with:
if (virBufferCheckError(&buf) < 0)
    ...

This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)

For example, the file /proc/cpuinfo for 24 cores PowerPC platform is larger than
the previous maximum size 2KB.
It will fail to start libvirtd with the error message as below:
virFileReadAll: Failed to read file '/proc/cpuinfo': Value too large for defined
data type
virSysinfoRead: internal error Failed to open /proc/cpuinfo

This patch defines CPUINFO_FILE_LEN as 10KB which is enough for most architectures.
Signed-off-by: NOlivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This same set of functions is used by the qemu, xen, and lxc drivers'
connectSysInfo function.

This is useful in certain circumstances, for example when
libvirtd is being executed by FreeBSD rc script, it cannot find
dmidecode installed from FreeBSD ports because it doesn't have
/usr/local (default prefix for ports) in PATH.

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/util/vircommand.c: Consistently use commas.
* src/util/virlog.c: Likewise.
* src/util/virnetdevbandwidth.c: Likewise.
* src/util/virnetdevmacvlan.c: Likewise.
* src/util/virnetdevvportprofile.c: Likewise.
* src/util/virnetlink.c: Likewise.
* src/util/virpci.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/virusb.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement the bare minimal sysinfo for AArch64 platforms by
reading the CPU models from /proc/cpuinfo.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

I noticed several unusual spacings in for loops, and decided to
fix them up.  See the next commit for the syntax check that found
all of these.

* examples/domsuspend/suspend.c (main): Fix spacing.
* python/libvirt-override.c: Likewise.
* src/conf/interface_conf.c: Likewise.
* src/security/virt-aa-helper.c: Likewise.
* src/util/virconf.c: Likewise.
* src/util/virhook.c: Likewise.
* src/util/virlog.c: Likewise.
* src/util/virsocketaddr.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/viruuid.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* tools/virsh-domain-monitor.c (vshDomainStateToString): Drop
default case, to let compiler check us.
* tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

These all existed before virfile.c was created, and for some reason
weren't moved.

This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.

This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>