- 10 9月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
Up to now, users can configure BIOS via the <loader/> element. With the upcoming implementation of UEFI this is not enough as BIOS and UEFI are conceptually different. For instance, while BIOS is ROM, UEFI is programmable flash (although all writes to code section are denied). Therefore we need new attribute @type which will differentiate the two. Then, new attribute @readonly is introduced to reflect the fact that some images are RO. Moreover, the OVMF (which is going to be used mostly), works in two modes: 1) Code and UEFI variable store is mixed in one file. 2) Code and UEFI variable store is separated in two files The latter has advantage of updating the UEFI code without losing the configuration. However, in order to represent the latter case we need yet another XML element: <nvram/>. Currently, it has no additional attributes, it's just a bare element containing path to the variable store file. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Acked-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 29 8月, 2014 2 次提交
-
-
由 John Ferlan 提交于
Add a new disk "driver" attribute "iothread" to be parsed as the thread number for the disk to use. In order to more easily facilitate the usage and configuration of the iothread, a "zero" for the attribute indicates iothreads are not supported for the device and a positive value indicates the specific thread to try and use.
-
由 John Ferlan 提交于
Introduce XML to allowing adding iothreads to the domain. These can be used by virtio-blk-pci devices in order to assign a specific thread to handle the workload for the device. The iothreads are the official implementation of the virtio-blk Data Plane that's been in tech preview for QEMU.
-
- 26 8月, 2014 1 次提交
-
-
由 Alex Williamson 提交于
QEMU 2.1 added support for the kvm=off option to the -cpu command, allowing the KVM hypervisor signature to be hidden from the guest. This enables disabling of some paravirualization features in the guest as well as allowing certain drivers which test for the hypervisor to load. Domain XML syntax is as follows: <domain type='kvm> ... <features> ... <kvm> <hidden state='on'/> </kvm> </features> ... Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
- 25 8月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 08 8月, 2014 2 次提交
-
-
由 Peter Krempa 提交于
-
由 John Ferlan 提交于
Introduce a new structure to handle an iSCSI host device based on the existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to the <source/> element. The existing scsi_host subsystem RNG was modified to read an optional "protocol='adapter'", although it won't be written out nor is it documented as an option (by choice). The new hostdev structure mimics the existing <disk/> element for an iSCSI device (network) device. New XML is: <hostdev mode='subsystem' type='scsi' managed='yes'> <source protocol='iscsi' name='iqn.1992-01.com.example'> <host name='example.org' port='3260'/> <auth username='myname'> <secret type='iscsi' usage='mycluster_myname'/> </auth> </source> <address type='drive' controller='0' bus='0' target='2' unit='5'/> </hostdev> The controller element will mimic the existing scsi_host code insomuch as when 'lsi' and 'virtio-scsi' are used.
-
- 30 7月, 2014 2 次提交
-
-
由 Eric Blake 提交于
A future patch is going to wire up qemu active block commit jobs; but as they have similar events and are canceled/pivoted in the same way as block copy jobs, it is easiest to track all bookkeeping for the commit job by reusing the <mirror> element. This patch adds domain XML to track which job was responsible for creating a mirroring situation, and adds a job='copy' attribute to all existing uses of <mirror>. Along the way, it also massages the qemu monitor backend to read the new field in order to generate the correct type of libvirt job (even though it requires a future patch to actually cause a qemu event that can be reported as an active commit). It also prepares to update persistent XML to match changes made to live XML when a copy completes. * docs/schemas/domaincommon.rng: Enhance schema. * docs/formatdomain.html.in: Document it. * src/conf/domain_conf.h (_virDomainDiskDef): Add a field. * src/conf/domain_conf.c (virDomainBlockJobType): String conversion. (virDomainDiskDefParseXML): Parse job type. (virDomainDiskDefFormat): Output job type. * src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish active from regular commit. * src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type. (qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type on completion. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml: Update tests. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise. * tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New file. * tests/qemuxml2xmltest.c (mymain): Drive new test. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Doing a blockcopy operation across a libvirtd restart is not very robust at the moment. In particular, we are clearing the <mirror> element prior to telling qemu to finish the job. Also, thanks to the ability to request async completion, the user can easily regain control prior to qemu actually finishing the effort, and they should be able to poll the domain XML to see if the job is still going. A future patch will fix things to actually wait until qemu is done before modifying the XML to reflect the job completion. But since qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether the job was cancelled (kept the original disk) or completed (pivoted to the new disk), we have to track which of the two operations were used to end the job. Furthermore, we'd like to avoid attempts to end a job where we are already waiting on an earlier request to qemu to end the job. Likewise, if we miss the qemu event (perhaps because it arrived during a libvirtd restart), we still need enough state recorded to be able to determine how to modify the domain XML once we reconnect to qemu and manually learn whether the job still exists. Although this patch doesn't actually fix the problem, it is a preliminary step that makes it possible to track whether a job has already begun steps towards completion. * src/conf/domain_conf.h (virDomainDiskMirrorState): New enum. (_virDomainDiskDef): Convert bool mirroring to new enum. * src/conf/domain_conf.c (virDomainDiskDefParseXML) (virDomainDiskDefFormat): Handle new values. * src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust client. * src/qemu/qemu_driver.c (qemuDomainBlockPivot) (qemuDomainBlockJobImpl): Likewise. * docs/schemas/domaincommon.rng (diskMirror): Expose new values. * docs/formatdomain.html.in (elementsDisks): Document it. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 29 7月, 2014 2 次提交
-
-
由 Michal Privoznik 提交于
<memoryBacking> <hugepages> <page size="1" unit="G" nodeset="0-3,5"/> <page size="2" unit="M" nodeset="4"/> </hugepages> </memoryBacking> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Roman Bogorodskiy 提交于
* docs/schemas/domaincommon.rng: Add bhyve domain type, nmdm serial type and master and slave optional attributes for serial that are used by nmdm * tests/domainschematest: Add bhyvexml2argvdata directory to validate bhyve XMLs
-
- 23 7月, 2014 1 次提交
-
-
由 Cédric Bosdonnat 提交于
Added <capabilities> in the <features> section of LXC domains configuration. This section can contain elements named after the capabilities like: <mknod state="on"/>, keep CAP_MKNOD capability <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability Users can restrict or give more capabilities than the default using this mechanism.
-
- 18 7月, 2014 1 次提交
-
-
由 Cédric Bosdonnat 提交于
LXC network devices can now be assigned a custom NIC device name on the container side. For example, this is configured with: <interface type='network'> <source network='default'/> <guest dev="eth1"/> </interface> In this example the network card will appear as eth1 in the guest.
-
- 17 7月, 2014 5 次提交
-
-
由 Eric Blake 提交于
The previous commit 09d4d261 put the interleave at the wrong point; it didn't allow interleaving with <memory>. * docs/schema/domaincommon.rng (numatune): Fix interleave location. * tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode.xml: Adjust test. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
In XML format, by definition, order of fields should not matter, so order of parsing the elements doesn't affect the end result. When specifying guest NUMA cells, we depend only on the order of the 'cell' elements. With this patch all older domain XMLs are parsed as before, but with the 'id' attribute they are parsed and formatted according to that field. This will be useful when we have tuning settings for particular guest NUMA node. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Michele Paolino 提交于
This patch adds support for the QEMU vhost-user feature to libvirt. vhost-user enables the communication between a QEMU virtual machine and other userspace process using the Virtio transport protocol. It uses a char dev (e.g. Unix socket) for the control plane, while the data plane based on shared memory. The XML looks like: <interface type='vhostuser'> <mac address='52:54:00:3b:83:1a'/> <source type='unix' path='/tmp/vhost.sock' mode='server'/> <model type='virtio'/> </interface> Signed-off-by: NMichele Paolino <m.paolino@virtualopensystems.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 02 7月, 2014 1 次提交
-
-
由 Mike Perez 提交于
This introduces two new attributes "cmd_per_lun" and "max_sectors" same with the names QEMU uses for virtio-scsi. An example of the XML: <controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50' max_sectors='512'/> The corresponding QEMU command line: -device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512, bus=pci.0,addr=0x3 Signed-off-by: NMike Perez <thingee@gmail.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 17 6月, 2014 1 次提交
-
-
由 Eric Blake 提交于
Commit 7c6fc394 introduced a regression in the XML produced for older clients. The argument at the time was that clients shouldn't be depending on output-only data for something that is only going to be triggered for a transient guest; but John Ferlan reported that the automated testsuite was such a client. It's better to be safe than sorry by guaranteeing back-compat cruft. Note that later patches will be using <mirror> for active block commit, but there we don't have to worry about back-compat. * src/conf/domain_conf.c (virDomainDiskDefFormat): Restore old style output when necessary. * docs/schemas/domaincommon.rng: Validate back-compat style. * docs/formatdomain.html.in: Update the documentation. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml: Update tests. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 07 6月, 2014 1 次提交
-
-
由 Eric Blake 提交于
Now that we track a disk mirror as a virStorageSource, we might as well update the XML to theoretically allow any type of mirroring destination (not just a local file). A later patch will also be reusing <mirror> to track the block commit of the top layer of a chain, which is another case where libvirt needs to update the backing chain after the job is finally pivoted, and since backing chains can have network backing files as the destination to commit into, it makes more sense to display that in the XML. This patch changes output-only XML; it was already documented that <mirror> does not affect a domain definition at this point (because qemu doesn't provide persistent bitmaps yet). Any application that was starting a block copy job with older libvirt and then relying on the domain XML to determine if it was complete will no longer be able to access the file= and format= attributes of mirror that were previously used. However, this is not going to be a problem in practice: the only time a block copy job works is on a transient domain, and any app that is managing a transient domain probably already does enough of its own bookkeeping to know which file it is mirroring into without having to re-read it from the libvirt XML. The one thing that was likely to be used in a mirroring job was the ready= attribute, which is unchanged. Meanwhile, I made sure the schema and parser still accept the old format, even if we no longer output it, so that upgrading from an older version of libvirt is seamless. * docs/schemas/domaincommon.rng (diskMirror): Alter definition. * src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two styles of mirror elements. (virDomainDiskDefFormat): Output new style. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New file, copied from... * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here before modernizing. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New files. * tests/qemuxml2xmltest.c (mymain): Test both styles. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 27 5月, 2014 1 次提交
-
-
由 Olivia Yin 提交于
ppce500v2 is not machine supported by official release of QEMU. It should be replaced by ppce500. Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 24 4月, 2014 1 次提交
-
-
由 Jiri Denemark 提交于
The XML for quite a longish backing chain is shown below: <disk type='network' device='disk'> <driver name='qemu' type='qcow2'/> <source protocol='nbd' name='bar'> <host transport='unix' socket='/var/run/nbdsock'/> </source> <backingStore type='block' index='1'> <format type='qcow2'/> <source dev='/dev/HostVG/QEMUGuest1'/> <backingStore type='file' index='2'> <format type='qcow2'/> <source file='/tmp/image2.qcow'/> <backingStore type='file' index='3'> <format type='qcow2'/> <source file='/tmp/image3.qcow'/> <backingStore type='file' index='4'> <format type='qcow2'/> <source file='/tmp/image4.qcow'/> <backingStore type='file' index='5'> <format type='qcow2'/> <source file='/tmp/image5.qcow'/> <backingStore type='file' index='6'> <format type='raw'/> <source file='/tmp/Fedora-17-x86_64-Live-KDE.iso'/> <backingStore/> </backingStore> </backingStore> </backingStore> </backingStore> </backingStore> </backingStore> <target dev='vdb' bus='virtio'/> </disk> Various disk types and formats can be mixed in one chain. The <backingStore/> empty element marks the end of the backing chain and it is there mostly for future support of parsing the chain provided by a user. If it's missing, we are supposed to probe for the rest of the chain ourselves, otherwise complete chain was provided by the user. The index attributes of backingStore elements can be used to unambiguously identify a specific part of the image chain. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 16 4月, 2014 3 次提交
-
-
由 Eric Blake 提交于
I noticed that depending on the <driver> attributes the user passed in, the output may omit the <driver> element altogether. For example, the rerror_policy has had this problem since commit 4bb4109f in Oct 2011. But in adding testsuite coverage to expose it, I found another problem: the C code is just fine without a driver name, but the XML validator required either a name or a cache mode. * src/conf/domain_conf.c (virDomainDiskDefFormat): Update conditional. * docs/schemas/domaincommon.rng (diskDriver): Simplify. * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml: * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args: New files. * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml: Enhance test. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml: Likewise. * tests/qemuxml2argvtest.c (mymain): New test. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Eric Blake 提交于
To make <disk> schema more maintainable and to allow for moving the pieces to a common file in the future. It relies on the ability to override definitions as part of an include, set up in the previous patch. The diff is a bit hard to read, because it mixes reindentation with refactoring; 'git diff -b --patience' may help. * docs/schemas/domaincommon.rng (disk): Refactor into pieces. (diskSource, diskSourceFile, diskSourceBlock, diskSourceDir) (diskSourceVolume: New defines. (diskSourceNetwork): Revise scope. * docs/schemas/domainsnapshot.rng (disksnapshot): Adjust. * tests/domainsnapshotxml2xmlin/disk-seclabel-invalid.xml, tests/domainsnapshotxml2xmlin/disk-network-seclabel-invalid.xml: New tests to check seclabel is forbidden in domain snapshot by schema. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Eric Blake 提交于
This patch is my first experience playing with nested grammars, as documented in http://relaxng.org/tutorial-20011203.html#IDA3PZR. I plan on doing more overrides in order to make the RelaxNG grammar mirror the C code refactoring into a common virStorageSource, but where different clients of that source do not support the same subset of functionality. By starting with something fairly easy to validate, I can make sure my later patches will be possible. This patch adds a use of the no-op <ref name='sourceStartupPolicy'/> to the disksnapshot definition, so that the snapshot version of a type='file' <source> more closely resembles the version in domaincommon. A future patch will merge the two files into using a common define, but this patch is sufficient for testing that adding <source startupPolicy='optional'/> in any of the tests/domainsnapshotxml2xmlin/*.xml files still gets rejected unless it occurs within the <domain> subelement, because the definition of startupPolicy is empty outside of domain.rng. * docs/schemas/storagecommon.rng (storageStartupPolicy) (storageSourceExtra): Create no-op defaults. * docs/schemas/domainsnapshot.rng (domain): Use nested grammar to avoid restricting <domain>. (storageSourceExtra): Create new override. (disksnapshot): Access overrides through common names. * docs/schemas/domaincommon.rng (disk): Access overrides through common names. * docs/schemas/domain.rng (storageStartupPolicy) (storageSourceExtra): Create new overrides. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 15 4月, 2014 2 次提交
-
-
由 Eric Blake 提交于
We had incomplete RelaxNG support for storage formats listed in virstoragefile.h: commit 027bf2ea added 'vdi' but forgot to update the <volume> and <domain> xml lists; the <volume> list was also missing 'fat' and 'vhd'. Maintaining two lists is a recipe for them getting out of sync, so make the list common so that both contexts benefit the next time we add a format in a single location. * docs/schemas/domaincommon.rng (storageFormat): Move... * docs/schemas/storagecommon.rng: ...here, and add vdi. * docs/schemas/storagevol.rng (formatfile): Use common list. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
In general, we try to make virt-xml-validate tolerant of input elements in any order when possible. However, as written, the RNG grammar did not permit <source> unless there was an explicit type= attribute (even though the C code manages just fine by defaulting to type='file'). After making the attribute optional on the 'file' branch, I noticed that the use of diskspec was now redundant with the branch when no <source> was supplied. View this patch with 'git diff -b' for a better picture of the schema change. * docs/schemas/domaincommon.rng (disk): Hoist 'diskspec' out of choice, make type='file' default, and still preserve interleave. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-source-pool.xml: * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml: New files. * tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml: * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml: Reorder XML. * tests/qemuxml2xmltest.c (mymain): Cover new files. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 14 4月, 2014 1 次提交
-
-
由 Eric Blake 提交于
Having two tiny files with a couple definitions didn't make as much sense as one common file, especially since I plan to add more definitions and use it in more places. * docs/schemas/storageencryption.rng: Merge this... * docs/schemas/storagefilefeatures.rng: ...and this, into... * docs/schemas/storagecommon.rng: ...this new file. * docs/schemas/Makefile.am (schema_DATA): Reflect renames. * docs/schemas/storagevol.rng: Likewise. * docs/schemas/domaincommon.rng: Likewise. * libvirt.spec.in: Likewise. * mingw-libvirt.spec.in: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 13 3月, 2014 1 次提交
-
-
由 Chunyan Liu 提交于
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as stub driver.
-
- 19 2月, 2014 1 次提交
-
-
由 Li Zhang 提交于
There is no keyboard support currently in libvirt. For some platforms (PPC64 QEMU) this makes graphics unusable, since the keyboard is not implicit and it can't be added via libvirt. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 11 2月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
Add a new character device backend called 'spiceport' that uses spice's channel for communications and apart from spicevmc can be used as a backend for any character device from libvirt's point of view. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 10 2月, 2014 2 次提交
-
-
由 Peter Krempa 提交于
Add a new <timer> for the HyperV reference time counter enlightenment and the iTSC reference page for Windows guests. This feature provides a paravirtual approach to track timer events for the guest (similar to kvmclock) with the option to use real hardware clock on systems with a iTSC with compensation across various hosts.
-
由 Peter Krempa 提交于
According to the documentation describing various tunables for domain timers not all the fields are supported by all the driver types. Express these in the RNG: - rtc, platform: Only these support the "track" attribute. - tsc: only one to support "frequency" and "mode" attributes - hpet, pit: tickpolicy/catchup attribute/element - kvmclock: no extra attributes are supported Additionally the attributes of the <catchup> element for tickpolicy='catchup' are optional according to the parsing code. Express this in the XML and fix a spurious space added while formatting the <catchup> element and add tests for it.
-
- 21 1月, 2014 1 次提交
-
-
由 Francesco Romani 提交于
spice-server offers an API to disable file transfer messages on the agent channel between the client and the guest. This is supported in qemu through the disable-agent-file-xfer option. This patch exposes this option to libvirt. Adds a new element 'filetransfer', with one property, 'enable', which accepts a boolean. Default is enabled, for backward compatibility. Depends on the capability exported in the first patch of the series. Signed-off-by: NFrancesco Romani <fromani@redhat.com>
-
- 20 1月, 2014 1 次提交
-
-
由 Gao feng 提交于
This patch introduces new xml elements under <blkiotune>, we use these new elements to setup the throttle blkio cgroup for domain. The new blkiotune node looks like this: <blkiotune> <device> <path>/path/to/block</path> <weight>1000</weight> <read_iops_sec>10000</read_iops_sec> <write_iops_sec>10000</write_iops_sec> <read_bytes_sec>1000000</read_bytes_sec> <write_bytes_sec>1000000</write_bytes_sec> </device> </blkiotune> Signed-off-by: NGuan Qiang <hzguanqiang@corp.netease.com> Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
- 11 1月, 2014 1 次提交
-
-
由 Eric Blake 提交于
When idmap was added to LXC, we forgot to cover it in the testsuite. The schema was missing an <element> layer, and as a result, virt-xml-validate was failing on valid dumpxml output. Reported by Eduard - Gabriel Munteanu on IRC. * docs/schemas/domaincommon.rng (idmap): Include <idmap> element, and support interleaves. * tests/lxcxml2xmldata/lxc-idmap.xml: New file. * tests/lxcxml2xmltest.c (mymain): Test it. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 07 1月, 2014 1 次提交
-
-
由 Pranavkumar Sawargaonkar 提交于
AArch64 qemu has similar behavior as armv7l, like use of mmio etc. This patch adds similar bypass checks what we have for armv7l to aarch64. E.g. we are enabling mmio transport for Nicdev. Making addDefaultUSB and addDefaultMemballoon to false etc. V3: - Adding missing domain rng schema for aarcg64 and test case in testutilsqemu.c which was causing test suite failure while running make check. V2: - Added testcase to qemuxml2argvtest as suggested during review comments of V1. V1: - Initial patch. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
-
- 13 12月, 2013 2 次提交
-
-
由 Hu Tao 提交于
panic device is a device that enables libvirt to receive notification of guest panic event. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Hu Tao 提交于
For example: <address type='isa' iobase='0x505' irq='0x1'/> Signed-off-by: NEric Blake <eblake@redhat.com>
-