by rewriting it completely from:
error: unsupported configuration: virtio only support device address
type 'PCI'

to:

error: unsupported configuration: virtio disk cannot have an address of type
drive

Since we now support CCW addresses as well.

While debugging the support for responding to qemu RX_FILTER_CHANGED
events, I had changed the "ignoring this event" log message from
VIR_DEBUG to VIR_WARN, but forgot to change it back before
pushing. Since many guest OSes make enough changes to multicast lists
and/or promiscuous mode settings to trigger this message, it's
starting to show up as a red herring in bug reports.

Commit 2360fe5d updated formating of <domain> element but forgot to
update qemucaps2xmldata xml files.  In addition the test code was broken
too.  Update the xml files and return -1 if testCompareXMLToXML fails
together with indentation fix.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit 5bba61fd changed the XPath strings to be absolute when parsing
the VM NUMA configuration. Unfortunately the <domain> element is not a
top level element when parsing the domain status XML thus the absolute
XPath string doesn't match.

Use the relative string so that the <numa> settings are not lost.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Add code to hot-remove memory devices from qemu. Unfortunately QEMU
doesn't support this right now, so this is just for completenes.

Add code to hot-add memory devices to running qemu instances.

Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.

Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.

Make sure that libvirt has all vital information needed to reliably
represent configuration of guest's memory devices in case of a
migration.

This patch forbids migration in case the required slot number and module
base address are not present (failed to be loaded from qemu via
monitor).

When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.

This patch adds code that parses and formats configuration for memory
devices.

A simple configuration would be:
<memory model='dimm'>
  <target>
    <size unit='KiB'>524287</size>
    <node>0</node>
  </target>
</memory>

A complete configuration of a memory device:
<memory model='dimm'>
  <source>
    <pagesize unit='KiB'>4096</pagesize>
    <nodemask>1-3</nodemask>
  </source>
  <target>
    <size unit='KiB'>524287</size>
    <node>1</node>
  </target>
</memory>

This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.

Dimm devices are described by the slot and base address. Add a new
address type to be able to describe such address.

To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.

Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.

With the current control flow the post parse callback returned success
right away for fully virtualized VMs. To allow adding additional checks
into the post parse callback tweak the conditions so that the function
doesn't return early except for error cases.

To clarify the original piece of code borrow the wording from the commit
message for the patch that introduced the code.

The function comment states that @props is always consumed, even on
failure. This was not true with the failure if the monitor is not using
QMP.

In the last section if the function determines that the config is
invalid when QEMU doesn't support the memory device the JSON config
object would be returned even if it doesn't make sense.

Assign the object to be returned only on success.

When no model is specified in the domain definition for
a scsi controller and the architectur is s390 than virtio-scsi
is set as default model.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Always add udev linker flags when WITH_UDEV is enabled to avoid
underlinking.

See commit 43dbcb15 (interface: always build all available backends)
Signed-off-by: NNatanael Copa <ncopa@alpinelinux.org>

Commit cf54c606 introduced the ability
to create missing storage volumes during migration. For network disks,
however, we may not necessarily be able to detect whether they already
exist -- there is no straight-forward way to map the disk to a storage
volume, and even if there were it's possible no configured storage pool
actually contains the disk.

It is better to assume the network disk exists in this case, rather than
aborting the migration completely. If the volume really is missing, QEMU
will generate an appropriate error later in the migration.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().

T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.

T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.

Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Lets not give a bad example and check for return values of
virNetwork* APIs called within the test. Even though it's
unlikely that any API will fail, it can happen. We're connected
to the test driver after all, and our API sequence is correct. So
test driver should fail only in case of bug or OOM.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There's no need to lock the network driver, as network driver
initialization is done prior accepting any client. There's nobody
to hop in and do something over partially initialized driver. Nor
qemu driver is doing that.

==30532== Observed (incorrect) order is: acquisition of lock at 0x1439EF50
==30532==    at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0x5324895: virMutexLock (virthread.c:88)
==30532==    by 0x5307E86: virObjectLock (virobject.c:323)
==30532==    by 0x5396440: virNetworkObjListForEach (network_conf.c:4511)
==30532==    by 0x19B29308: networkStateInitialize (bridge_driver.c:686)
==30532==    by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532==    by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532==    by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532==    by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
==30532==    by 0xA4EDC8C: clone (in /lib64/libc-2.19.so)
==30532==
==30532==  followed by a later acquisition of lock at 0x1439CD60
==30532==    at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0x5324895: virMutexLock (virthread.c:88)
==30532==    by 0x19B27B2C: networkDriverLock (bridge_driver.c:102)
==30532==    by 0x19B27B60: networkGetDnsmasqCaps (bridge_driver.c:113)
==30532==    by 0x19B2856A: networkUpdateState (bridge_driver.c:389)
==30532==    by 0x53963E9: virNetworkObjListForEachHelper (network_conf.c:4488)
==30532==    by 0x52E2224: virHashForEach (virhash.c:521)
==30532==    by 0x539645B: virNetworkObjListForEach (network_conf.c:4512)
==30532==    by 0x19B29308: networkStateInitialize (bridge_driver.c:686)
==30532==    by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532==    by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532==    by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532==
==30532== Required order was established by acquisition of lock at 0x1439CD60
==30532==    at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0x5324895: virMutexLock (virthread.c:88)
==30532==    by 0x19B27B2C: networkDriverLock (bridge_driver.c:102)
==30532==    by 0x19B28DF9: networkStateInitialize (bridge_driver.c:609)
==30532==    by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532==    by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532==    by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532==    by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
==30532==    by 0xA4EDC8C: clone (in /lib64/libc-2.19.so)
==30532==
==30532==  followed by a later acquisition of lock at 0x1439EF50
==30532==    at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0x5324895: virMutexLock (virthread.c:88)
==30532==    by 0x5307E86: virObjectLock (virobject.c:323)
==30532==    by 0x538A09C: virNetworkAssignDef (network_conf.c:527)
==30532==    by 0x5391EB2: virNetworkLoadState (network_conf.c:3008)
==30532==    by 0x53922D4: virNetworkLoadAllState (network_conf.c:3128)
==30532==    by 0x19B2929A: networkStateInitialize (bridge_driver.c:671)
==30532==    by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532==    by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532==    by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532==    by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532==    by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Wikipedia's list of common misspellings [1] has a machine-readable
version.  This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched.  The list of changes was manually re-checked for false
positives.

[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machinesSigned-off-by: NMartin Kletzander <mkletzan@redhat.com>

We've never set the cpuset.memory_migrate value to anything, keeping it
on default.  However, we allow changing cpuset.mems on live domain.
That setting, however, don't have any consequence on a domain unless
it's going to allocate new memory.

I managed to make 'virsh numatune' move all the memory to any node I
wanted even without disabling libnuma's numa_set_membind(), so this
should be safe to use with it as well.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1198497Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Deepak Shetty has changed preferred email address since prior
contributions.
Signed-off-by: NEric Blake <eblake@redhat.com>

xen.git commit babeca32 added a pkgconfig file for libxenlight,
allowing libxl apps to determine the location of Xen binaries
such as firmware blobs, device emulator, etc.

This patch adds support for xenlight.pc in the libxl driver, falling
back to the previous configure logic if not found.  It introduces
LIBXL_FIRMWARE_DIR and LIBXL_EXECBIN_DIR to define the firmware and
libexec_bin locations.  If xenlight.pc does not exist, the defines
are set to the current hardcoded paths.  The capabilities'
<emulator> and <loader> elements are updated to use the paths.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

If, by any reason, parallelsNetworkOpen fails it dereferences
newly allocated privconn->networks via virObjectUnref, which in
turn deallocates its memory.
Subsequent call of parallelsNetworkClose calls virObjectUnref
that leads to double memory free. To prevent this we should zero
privconn->networks to make all subsequent virObjectUnref be safe.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1196934

When qemu exits during startup, libvirt includes the error from
/var/log/libvirt/qemu/vm.log in the error message:

$ virsh start test3
error: Failed to start domain test3
error: internal error: early end of file from monitor: possible problem:
2015-02-27T03:03:16.985494Z qemu-kvm: -numa memdev is not supported by
machine rhel6.5.0

The check for domain liveness added to qemuDomainObjExitMonitor
in commit dc2fd51f sometimes overwrites this error:
$ virsh start test3
error: Failed to start domain test3
error: operation failed: domain is no longer running

Fix the check to only report an error if there is none set.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

When converting domXML from native, the libxl driver was overwriting
useful errors from the xenconfig parsing code with a useless, generic
error.  E.g. "internal error: parsing xm config failed" vs
"internal error: config value usbdevice was malformed".  Remove the
redundant (and useless) error reporting in the libxl driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Issue #1 - A call to virBitmapNew did not check if the allocation
failed which could lead to a NULL dereference

Issue #2 - When deleting the pin entries from the config file, the
code loops from the number of elements down to the "new" vcpu count;
however, the pin id values are numbered 0..n-1 not 1..n, so the "first"
pin attempt would never work. Luckily the check was for whether the
incoming 'n' (vcpu id) matched the entry in the array from 0..arraysize
rather than a dereference of the 'n' entry

I spent quite some time figuring that backingStore info
isn't included in the dom xml, unless guest is up and
running. Hopefully putting that in the doc should help.

Also, several people have complained that libvirt reports
a backing file as raw, even though they expected it to be
qcow2; where the culprit is usually the user forgetting to
create the file with qemu-img create -o backing_fmt=qcow2.

This patch adds that info to the doc.
Signed-off-by: NDeepak C Shetty <deepakcs@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

In qemu 2.3, the migration status will include 'cancelling' in the
window between when an asynchronous cancel has been requested and
when the migration is actually halted.  Previously, qemu hid this
state and reported 'active'.  Libvirt manages the sequence okay
even when the string is unrecognized (that is, it will report an
unknown state:

Migration: [ 69 %]^Cerror: internal error: unexpected migration status in cancelling.

but the migration is still cancelled), but recognizing the string
makes for a smoother user experience.

* src/qemu/qemu_monitor.h
(QEMU_MONITOR_MIGRATION_STATUS_CANCELLING): Add enum.
* src/qemu/qemu_monitor.c (qemuMonitorMigrationStatus): Map it.
* src/qemu/qemu_migration.c (qemuMigrationUpdateJobStatus): Adjust
clients.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetMigrationStatusReply): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Investigation of a problem with creating passthrough macvtap devices
(https://bugzilla.redhat.com/show_bug.cgi?id=1185501) has shown that
this slightly more verbose failure message is useful. In particular,
the mac address can be used to determine the domain. You could also
figure this out by looking at preceding messages in a debug log, but
this gets it in a single place.

virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.

Problem Description:
When we set boot order for a vhost-user network interface, we found the boot index
doesn't work.

Cause of the Problem:
In the function qemuBuildVhostuserCommandLine(), it forcely set the arg bootindex of
function qemuBuildNicDevStr() to 0. Thus, the bootindex parameter got missing.

Solution:
Trans the arg bootindex down.
Signed-off-by: NGao Haifeng <gaohaifeng.gao@huawei.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>

network adapter is used

which is on by default when a new VM/CT is created.
We should do this because this feature can't be controlled
by libvirt now and it sets up some iptables rules. So it's
better to do this to avoid potential conflict of different
set of rules or to avoid unexpected behavior.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

and set adapter model specified in xml
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>