* Fix for the bug reported at:

https://bugzilla.redhat.com/show_bug.cgi?id=573908

The hang fix in d376b7d6 was incomplete
since it left quite a few {Enter,Exit}Monitor calls which require driver
to be unlocked. Since the driver is locked throughout the whole
function, {Enter,Exit}MonitorWithDriver need to be used instead to
ensure driver is not locked when issuing monitor commands.

The comment in qemuDomainWaitForMigrationComplete says we are polling
every 50ms but the code sleeps only for 50us. This was already discussed
during review but apparently forgotten when the series was pushed.

The text monitor code was checking for a '\n' prefix on several
places. Previously this would work, but since the monitor code
re-write the '\n' is already stripped off, so mustn't be checked
for.

* src/qemu/qemu_monitor_text.c: Fix monitor error checking

Probably as a result of a merge error, the CPU hotplug command
names were completely wrong.

* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
  the CPU hotplug command names

Adds ability to provide a preferred CPU model for CPUID data decoding.
Such model would be considered as the best possible model (if it's
supported by hypervisor) regardless on number of features which have to
be added or removed for describing required CPU.

So far, when CPUID data were converted into CPU model and features, the
features can only be added to the model. As a result, when a guest asked
for something like "qemu64,-svm" it would get a qemu32 plus a bunch of
additional features instead.

This patch adds support for removing feature from the base model.
Selection algorithm remains the same: the best CPU model is the model
which requires lowest number of features to be added/removed from it.

Qemu committed a patch which list some CPU names in [] when asked for
supported CPUs (qemu -cpu ?). Yet, it needs such CPUs to be passed
without those square braces. When probing for supported CPU models, we
can just strip the square braces and pretend we have never seen them.

First, inital VCPU pinning is set correctly but then it is reset by
assigning qemu process to a new cgroup (which contains all CPUs). It's
easily fixed by swapping these two actions.

Fixes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578347

* src/esx/esx_vi.h: Placate cppi.

An empty root snapshot list was considered as error condition. Creating a
new snapshot would fail if the domain didn't have snapshots yet, because
the snapshot-create function tries to lookup the list of existing snapshots
in order to verify that the snapshot name is unique. This fails if the
domain doesn't have snapshots yet.

Removing the NULL check from esxVI_LookupRootSnapshotTreeList fixes this.

FindByIp may return nothing if there is no host or virtual machine
with the given IP address. Handle that case properly.

The supported virtualHW.version doesn't depend on the API version,
but on the product version.

This patch adds support for the connlimit match in iptables that is used
to limit the number of outgoing directions.

I am moving some of the eb/iptables related functions into the interface
of the firewall driver and am making them only accessible via the driver's
interface. Otherwise exsiting code is adapted where needed. I am adding one
new function to the interface that checks whether the 'basic' rules can be
applied,  which will then be used by a subsequent patch.

According to GCC, ATTRIBUTE_UNUSED means that an attribute _might_
be unused, not _must_ be unused.  Therefore, it is easier to
blindly mark a variable, than to try and do preprocessor limiting
of when we know it is unused.

* src/remote/remote_driver.c (remoteAuthenticate): Mark attribute
as potentially unused.
Reported by Gustovo Morozowski.

No semantic change, the now explicitly set default are all zero and
that's what GCC sets unspecified struct members to.

Add a test case and document it.

Otherwise compiling with -Werror will fail.

The initial boot of VMs uses -device for NICs where available. The
corresponding monitor command is device_add, but the network hotplug
code was still using device_del by mistake.

* src/qemu/qemu_driver.c: Use device_add for NIC hotplug where
  available

If either of the getfd or host_net_add monitor commands return
any text, this indicates an error condition. Don't ignore this!

* src/qemu/qemu_monitor_text.c: Report errors for getfd and
  host_net_add

The 'device_del' command expects a parameter called 'id' but we
were passing 'config'.

* src/qemu/qemu_monitor_json.c: Fix device_del command parameter

And close the driver on connection close.

The idea is that every API implementation in driver which has flags
parameter should first call virCheckFlags() macro to check the function
was called with supported flags:

    virCheckFlags(VIR_SUPPORTED_FLAG_1 |
                  VIR_SUPPORTED_FLAG_2 |
                  VIR_ANOTHER_SUPPORTED_FLAG, -1);

The error massage which is printed when unsupported flags are passed
looks like:

    invalid argument in virFooBar: unsupported flags (0x2)

Where the unsupported flags part only prints those flags which were
passed but are not supported rather than all flags passed.

Don't use state-matching in a drop rule.

This also fixes a portability problem with the %a format modifier.
%a is not portable and made esxDomainDumpXML fail at runtime in
MinGW builds.

This stops libvirt trying to connect to a non-existing libvirtd on the
ESX server in order to find a nwfilter driver.

* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Report
failures on pipe used for wakeup.
Reported by Chris Lalancette.

Based on a warning from coverity.  The safe* functions
guarantee complete transactions on success, but don't guarantee
freedom from failure.

* src/util/util.h (saferead, safewrite, safezero): Add
ATTRIBUTE_RETURN_CHECK.
* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Ignore
some failures.
(remoteIOReadBuffer): Adjust error messages on read failure.
* daemon/event.c (virEventHandleWakeup): Ignore read failure.

Regression introduced in commit 62170b99.

* src/util/memory.h: Placate cppi, and fit 80 columns.

Disk devices in QEMU have two parts, the guest device and the host
backend driver. Historically these two parts have had the same
"unique" name. With the switch to using -device though, they now
have separate names. Thus when changing CDROM media, for guests
using -device syntax, we need to prepend the QEMU_DRIVE_HOST_PREFIX
constant

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add helper function
  qemuDeviceDriveHostAlias() for building a host backend alias
* src/qemu/qemu_driver.c: Use qemuDeviceDriveHostAlias() to determine
  the host backend alias for performing eject/change commands in the
  monitor

The device_add command was added in JSON mode in a way I didn't
expect. Instead of passing the normal device string to the JSON
command:

    { "execute": "device_add", "arguments": { "device": "ne2k_pci,id=nic.1,netdev=net.1" } }

We need to split up the device string into a full JSON object

    { "execute": "device_add", "arguments": { "driver": "ne2k_pci", "id": "nic.1", "netdev": "net.1" } }

* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Rename the
  qemuCommandLineParseKeywords method to qemuParseKeywords
  and export it to monitor
* src/qemu/qemu_monitor_json.c: Split up device string into
  a JSON object for device_add command

The parameter for the qemuMonitorDeviceDel() is a device alias,
not a device config string. Rename the parameter reflect this
and avoid confusion to readers.

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Rename devicestr to devalias in qemuMonitorDeviceDel()

The QEMU developers have stated that they will not be porting
the commands 'pci_add', 'pci_del', 'usb_add', 'usb_del' to the
JSON mode monitor, since they're obsoleted by 'device_add'
and 'device_del'. libvirt has (untested) code that would have
supported those commands in theory, but since we already use
device_add/del where available, there's no need to keep the
legacy stuff anymore.

The text mode monitor keeps support for all commands for sake
of historical compatability.

* src/qemu/qemu_monitor_json.c: Remove 'pci_add', 'pci_del',
  'usb_add', 'usb_del' commands

The QEMU driver is mistakenly calling directly into the text
mode monitor for the domain memory stats query.

* src/qemu/qemu_driver.c: Replace qemuMonitorTextGetMemoryStats with
  qemuMonitorGetMemoryStats
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add the new
  wrapper for qemuMonitorGetMemoryStats
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  qemuMonitorJSONGetMemoryStats implementation