The SELinux policy for LXC uses a different configuration file
than the traditional svirt one. Thus we need to load
/etc/selinux/targeted/contexts/lxc_contexts which contains
something like this:

 process = "system_u:system_r:svirt_lxc_net_t:s0"
 file = "system_u:object_r:svirt_lxc_file_t:s0"
 content = "system_u:object_r:virt_var_lib_t:s0"

cleverly designed to be parsable by virConfPtr
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the SELinux driver stores its state in a set of global
variables. This switches it to use a private data struct instead.
This will enable different instances to have their own data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The AppArmour driver does not currently have support for LXC
so ensure that when probing, it claims to be disabled
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To allow the security drivers to apply different configuration
information per hypervisor, pass the virtualization driver name
into the security manager constructor.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There is no 'udev.target' unit in systemd (only 'udev.service')
yet libvirtd's unit file had a dep on one. There's no compelling
reason for a dep on udev, so remove it altogether.
Reported-by: NAvi Kivity <avi@redhat.com>

Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.

The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.

The uhci1, uhci2, uhci3 companion controllers for ehci1 must
have a master start port set. Since this value is predictable
we should set it automatically if the app does not supply it

Currently each USB2 companion controller gets put on a separate
PCI slot. Not only is this wasteful of PCI slots, but it is not
in compliance with the spec for USB2 controllers. The master
echi1 and all companion controllers should be in the same slot,
with echi1 in function 7, and uhci1-3 in functions 0-2 respectively.

* src/qemu/qemu_command.c: Special case handling of USB2 controllers
  to apply correct pci slot assignment
* tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args,
  tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand
  test to cover automatic slot assignment

The virDomainDeviceInfoIsSet API was only checking if an
address or alias was set in the struct. Thus if only a
rom bar setting / filename, boot index, or USB master
value was set, they could be accidentally dropped when
formatting XML

Callers of virGetUser{Config,Runtime,Cache}Directory all
append further path component. We should not be
adding a trailing slash in the return path otherwise we
get paths containing '//'
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.

This results in output like:

2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]

2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]

* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
  stack traces
* tests/testutils.c: Adapt to API change
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The current unprivileged user libvirtd sockets are in the abstract
namespace. This has a number of problems

 - You can't connect to them remotely using the nc/ssh tunnel
 - This is not portable for OS-X, BSD & probably others
 - Parent directory permissions don't apply

According to Fedora guidelines, because we bundle gnulib we
need to add a virtual Provides: bundled(gnulib).

https://fedoraproject.org/wiki/Packaging:No_Bundled_Libraries#Requirement_if_you_bundle

to save some syscalls (as suggested by Eric Blake)

$LISTFILE is created even no domain is running, and the empty
$LISTFILE could cause improper service status.

    stopped ,with saved guests

Which is not right, as there is no domain was saved.

"Instead of developing one CPU with 12 cores, the Magny Cours is
actually two 6 core “Bulldozer” CPUs combined in to one package"

I.e, each package has two NUMA nodes, and the two numa nodes share
the same core ID set (0-6), which means parsing the cores number
from sysfs doesn't work in this case.

And the wrong CPU number could cause three problems for libvirt:

1) performance lost

  A domain without "cpuset" or "placement='auto'" (to drive numad)
specified will be only pinned to part of the CPUs.

2) domain can be started

  If a domain uses numad, and the advisory nodeset returned from
numad contains node which exceeds the range of wrong total CPU
number. The domain will fail to start, as the bitmask passed to
sched_setaffinity could be fully filled with zero.

3) wrong CPU number affects lots of stuffs.

  E.g. for command "virsh vcpuinfo", "virsh vcpupin", it will always
output with the truncated CPU list.

For more details:

https://www.redhat.com/archives/libvir-list/2012-May/msg00607.html

This patch is to fix the problem by parsing /proc/cpuinfo to get
the value of field "cpu cores", and use it as nodeinfo->cores if
it's greater than the cores number from sysfs.

Like for 'static' placement, when the memory policy mode is
'strict', set the memory policy by writing the advisory nodeset
returned from numad to cgroup file cpuset.mems,

On some of the NUMA platforms, the CPU index in each NUMA node
grows non-consecutive. While on other platforms, it can be inconsecutive,
E.g.

% numactl --hardware
available: 4 nodes (0-3)
node 0 cpus: 0 4 8 12 16 20 24 28
node 0 size: 131058 MB
node 0 free: 86531 MB
node 1 cpus: 1 5 9 13 17 21 25 29
node 1 size: 131072 MB
node 1 free: 127070 MB
node 2 cpus: 2 6 10 14 18 22 26 30
node 2 size: 131072 MB
node 2 free: 127758 MB
node 3 cpus: 3 7 11 15 19 23 27 31
node 3 size: 131072 MB
node 3 free: 127226 MB
node distances:
node   0   1   2   3
  0:  10  20  20  20
  1:  20  10  20  20
  2:  20  20  10  20
  3:  20  20  20  10

This patch is to fix the problem by using the CPU index in
caps->host.numaCell[i]->cpus[i] to set the bitmask instead of
assuming the CPU index of the NUMA nodes are always sequential.

For pseries guest, the default controller model is
ibmvscsi controller, this controller only can work
on spapr-vio address.

This patch is to assign spapr-vio address type to
ibmvscsi controller and correct vscsi test case.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

Add ignore param for readonly and shared disk in sanlock

Test 2 data grabbed from a 2-core 1-node laptop.
Test 3 data grabbed from a 48-cpu AMD Magny Cours box.

* tests/nodeinfodata/linux-nodeinfo-sysfs-test-2*: New test data.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-3*: Likewise.
* tests/nodeinfotest.c (mymain): Run them.
* cfg.mk
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Exempt
new test files.

We had previously weakened our nodeinfotest in order to ignore parsed
node values, because the parse function was mistakenly relying on
host files.  A better fix is to avoid using the numactl library, but
to instead parse the same files that numactl would read, all while
allowing the files to be relative to our choice of directory.

* src/nodeinfo.c (CPU_SYS_PATH, NODE_SYS_PATH): Replace with...
(SYSFS_SYSTEM_PATH): ...parent directory.
(linuxNodeInfoCPUPopulate): Check NUMA nodes from requested
directory (by inlining numactl code).
(nodeGetCPUmap, nodeGetMemoryStats): Adjust macro use.
* tests/nodeinfotest.c (linuxTestCompareFiles, linuxTestNodeInfo):
Update test to match.

We were wasting time to malloc a copy of a constant string, then
copy it into static storage, for every call to nodeGetInfo.  At
least we were lucky that it was a constant source, and thus not
subject to even worse issues with one thread clobbering the static
storage while another was using it.  This gets rid of the waste,
by passing the string through the stack instead, as well as renaming
internal functions to better match our conventions.

* src/nodeinfo.c (sysfs_path): Delete.
(get_cpu_value, count_thread_siblings, parse_socket): Add
parameter, and rename...
(virNodeGetCpuValue, virNodeCountThreadSiblings)
(virNodeParseSocket): ... into a common namespace.
(cpu_online, parse_core): Inline into callers.
(linuxNodeInfoCPUPopulate): Update caller.
(nodeGetInfo): Drop a useless malloc.

Commit cdce2f42 tried to silence a compiler warning on 32-bit builds,
but the gcc shipped with RHEL 5 is old enough that the type conversion
via multiplication by 1 was insufficient for the task.

* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Previous attempt
didn't get past all gcc versions.

Use the address specified in the actual commit, to placate
'make syntax-check'.

As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

This offers a number of advantages:
 * Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
 * Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
 * Supports performing smart or selective migration of settings
between different OS versions
 * Supports reseting settings without breaking things
 * Makes it possible to clear cache data to make room when the disk
is filling up
 * Allows us to write a robust and efficient backup solution
 * Allows an admin flexibility to change where data and settings are stored
 * Dramatically reduces the complexity and incoherence of the
system for administrators

* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po: pushed new sources and synchronized new languages translations

Appending an item to a list transfers ownership of that item to the
list owner. But an error can occur in between item allocation and
appending it to the list. In this case the item has to be freed
explicitly. This was not done in some special cases resulting in
possible memory leaks.

Reported by Coverity.

This patch lifts the limit of calling thread detection code only on KVM
guests. With upstream qemu the thread mappings are reported also on
non-KVM machines.

QEMU adopted the thread_id information from the kvm branch.

To remain compatible with older upstream versions of qemu the check is
attempted but the failure to detect threads (or even run the monitor
command - on older versions without SMP support) is treated non-fatal
and the code reports one vCPU with pid of the hypervisor (in same
fashion this was done on non-KVM guests).

After a cpu hotplug the qemu driver did not refresh information about
virtual processors used by qemu and their corresponding threads. This
patch forces a re-detection as is done on start of QEMU.

This ensures that correct information is reported by the
virDomainGetVcpus API and "virsh vcpuinfo".

A failure to obtain the thread<->vcpu mapping is treated non-fatal and
the mapping is not updated in a case of failure as not all versions of
QEMU report this in the info cpus command.

This patch changes a switch statement into ifs when handling live vs.
configuration modifications getting rid of redundant code in case when
both live and persistent configuration gets changed.

Ever since commit c964b6aa, make was trying to find the timestamp
of '""./apibuild.py".stamp"', but only touching 'apibuild.py.stamp',
and thus always rebuilding.  Reported by Daniel P. Berrange.

* docs/Makefile.am (APIBUILD, APIBUILD_STAMP): Omit bogus quotes.

when failing to attach another usb device to a domain for some reason
which has one use device attached before, the libvirtd crashed.
The crash is caused by null-pointer dereference error in invoking
usbDeviceListSteal passed in NULL value usb variable.
commit 05abd150 introduces the bug.

Based on a report by Seth Vidal.  Just because _you_ can use virsh
to connect to both source and destinations does not mean that libvirtd
on the source (aka _root_) can likewise connect to the destination;
this matters when setting up a peer-to-peer migration instead of a
native one.

* docs/migration.html.in: Mention that in peer-to-peer, the owner
of the source libvirtd (usually root) must be able to connect to
the destination.

s/nuamd/numad/,

Detected by valgrind. Leaks are introduced in commit 122fa379.

src/conf/storage_conf.c: fix memory leaks.

How to reproduce?
$ make && make -C tests check TESTS=storagepoolxml2xmltest
$ cd tests && valgrind -v --leak-check=full ./storagepoolxml2xmltest

actual result:
==28571== LEAK SUMMARY:
==28571==    definitely lost: 40 bytes in 5 blocks
==28571==    indirectly lost: 0 bytes in 0 blocks
==28571==      possibly lost: 0 bytes in 0 blocks
==28571==    still reachable: 1,054 bytes in 21 blocks
==28571==         suppressed: 0 bytes in 0 blocks
Signed-off-by: NAlex Jia <ajia@redhat.com>

Commit 97010eb1 forgot to change the other side of an #ifdef.

* src/qemu/qemu_process.c (qemuProcessInitNumaMemoryPolicy): Add
argument.

No useful error was being reported when an invalid character device
target type is specified in the domainXML. E.g.

    ...
    <console type="pty">
      <source path="/dev/pts/2"/>
      <target type="kvm" port="0"/>
    </console>
    ...

resulted in

error: Failed to define domain from x.xml
error: An error occurred, but the cause is unknown

With this small patch, the error is more helpful

error: Failed to define domain from x.xml
error: XML error: unknown target type 'kvm' specified for character device

Commit 64297313 added three direct
references to nl_handle_* instead of using our aliases which hide
differences between libnl-3 and libnl-1.