The previous patch fixed "forwardPlainNames" so that it really is
doing only what is intended, but left the default to be
"forwardPlainNames='no'". Discussion around the initial version of
that patch led to the decision that the default should instead be
"forwardPlainNames='yes'" (i.e. the original behavior before commit
f3886825). This patch makes that change to the default.

In commit f3868259 we began adding the options

  --domain-needed
  --local=/$mydomain/

to all dnsmasq commandlines with the stated reason of preventing
forwarding of DNS queries for names that weren't fully qualified
domain names ("FQDN", i.e. a name that included some "."s and a domain
name). This was later changed to

  domain-needed
  local=/$mydomain/

when we moved the options from the dnsmasq commandline to a conf file.

The original patch on the list, and discussion about it, is here:

  https://www.redhat.com/archives/libvir-list/2012-August/msg01594.html

When a domain name isn't specified (mydomain == ""), the addition of
"domain-needed local=//" will prevent forwarding of domain-less
requests to the virtualization host's DNS resolver, but if a domain
*is* specified, the addition of "local=/domain/" will prevent
forwarding of any requests for *qualified* names within that domain
that aren't resolvable by libvirt's dnsmasq itself.

An example of the problems this causes - let's say a network is
defined with:

   <domain name='example.com'/>
   <dhcp>
      ..
      <host mac='52:54:00:11:22:33' ip='1.2.3.4' name='myguest'/>
   </dhcp>

This results in "local=/example.com/" being added to the dnsmasq options.

If a guest requests "myguest" or "myguest.example.com", that will be
resolved by dnsmasq. If the guest asks for "www.example.com", dnsmasq
will not know the answer, but instead of forwarding it to the host, it
will return NOT FOUND to the guest. In most cases that isn't the
behavior an admin is looking for.

A later patch (commit 4f595ba6) attempted to remedy this by adding a
"forwardPlainNames" attribute to the <dns> element. The idea was that
if forwardPlainNames='yes' (default is 'no'), we would allow
unresolved names to be forwarded. However, that patch was botched, in
that it only removed the "domain-needed" option when
forwardPlainNames='yes', and left the "local=/mydomain/".

Really we should have been just including the option "--domain-needed
--local=//" (note the lack of domain name) regardless of the
configured domain of the network, so that requests for names without a
domain would be treated as "local to dnsmasq" and not forwarded, but
all others (including those in the network's configured domain) would
be forwarded. We also shouldn't include *either* of those options if
forwardPlainNames='yes'. This patch makes those corrections.

This patch doesn't remedy the fact that default behavior was changed
by the addition of this feature. That will be handled in a subsequent
patch.

I've received a notice over IRC that on some systems, the
virnetdevbandwidthtest is not linked with libxml:

  /usr/bin/ld: virnetdevbandwidthtest.o: undefined reference to symbol 'xmlStrEqual@@LIBXML2_2.4.30'
  /usr/lib/x86_64-linux-gnu/libxml2.so.2: error adding symbols: DSO missing from command line

Trivial way avoiding this is to add LIBXML_LIBS to
virnetdevbandwidthtest_LDADD.

And while doing this, fix one error raised by coverity. With
current code, @actual_cmd is allowed to be NULL for the whole
run of testVirNetDevBandwidthSet. However, if something else
was expected, the @actal_cmd is passed to virtTestDifference
which dereference it immediately.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On openSuse, (and possibly other distros), tc isn't located in
/sbin/tc. To get rid of that problem, use TC constant instead of hard
coded /sbin/tc in the expected string

Add tests/virscsidata/sg0 and tests/virscsidata/sg8 as the test
input for constructing scsi->sg_path. And change the scsi generic
number of "1:0:0:0", because it's easy to hide the problem (assuming
most machines have a CDROM drive).
Signed-off-by: NOsier Yang <jyang@redhat.com>

This creates the basic unit tests for the scsi utils.
Signed-off-by: NOsier Yang <jyang@redhat.com>

To support passing the path of the test data to the utils, one
more argument is added to virSCSIDeviceGetSgName,
virSCSIDeviceGetDevName, and virSCSIDeviceNew, and the related
code is changed accordingly.

Later tests for the scsi utils will be based on this patch.
Signed-off-by: NOsier Yang <jyang@redhat.com>

This reverts commit 2996e6be
and some parts of 2636dc8c.

The former one tried to implement QoS setting on bridgeless networks.
However, as discussed upstream [1], the patch is far away from being
useful in even a single case. The whole idea of network QoS is to have
aggregated limits over several interfaces. This patch is doing
completely the opposite when merging two QoS settings (from the network
and the domain interface) into one which is then set at the domain
interface itself, not the network.

The latter one is the test for the previous one. Now none of them makes
sense.

1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html

Conflicts:
	tests/virnetdevbandwidthtest.c: New test has been introduced since
    then.

The test tries to set some QoS limits and check if the commands
that are actually executed are the expected ones.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add support for specifying various types when doing snapshots. This will
later allow to do snapshots on network backed volumes. Disks of type
'volume' are not supported by snapshots (yet).

Also amend the test suite to check parsing of the various new disk
types that can now be specified.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

The new tests would fail in various ways without the two previous
commits.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

When all source CPU XMLs contain just a single CPU model (with a
possibly varying set of additional feature elements),
virConnectBaselineCPU will try to use this CPU model in the computed
guest CPU. Thus, when used on just a single CPU (useful with
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES), the result will not use a
different CPU model.

If the computed CPU uses the source model, set fallback mode to 'forbid'
to make sure the guest CPU will always be as close as possible to the
source CPUs.

https://bugzilla.redhat.com/show_bug.cgi?id=1049391

virConnectBaselineCPU test results are now stored in different files
depending on VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES.

The only API tested so far would be virNetDevBandwidthMinimal.
But there's more to come!
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Check if cpu stats are read correctly from a sample
/proc/stat collected from a 24 CPU machine.

linuxNodeInfoCPUPopulate is only used in the nodeinfo.c file
and in the test suite.

Windows doesn't allow : in filenames.

Commit 21685c95 added files with a : in
their names. This broke git operations on Windows as git is not able to
create those files on clone or pull.

Replace : with - in the offending filenames and adapt the test case.

Libvirtd would crash if a domain contained an empty cdrom drive of
type='volume' as the disk def->srcpool member would be dereferenced. Fix
it by checking if the source pool is present before dereferencing it.

Also alter tests to catch this issue in the future.

Reported by: Kevin Shanahan
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056328

spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.

Depends on the capability exported in the first patch of the series.
Signed-off-by: NFrancesco Romani <fromani@redhat.com>

spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch detects if QEMU supports this option, and add
a capability if does.
Signed-off-by: NFrancesco Romani <fromani@redhat.com>

--001a11c3e84c4130bc04f03cda95
Content-Type: text/plain; charset=ISO-8859-1

From: Wout Mertens <Wout.Mertens@gmail.com>

Adds test for transient disk translation in vmx files

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Such driver can be used to make sure PCI APIs fail properly.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Especially for devices that are not bound to any driver.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This file is used by PCI detach and reattach APIs to probe for a driver
that handles a specific device.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

For example:

 ...
 5) testVirPCIDeviceIsAssignable(0005:90:01.0)      ... OK
 6) testVirPCIDeviceIsAssignable(0001:01:00.0)      ... OK
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,

we can use these interfaces to set up throttle
blkio cgroup for domain.

This patch also adds the new throttle blkio cgroup
elements to the test xml.
Signed-off-by: NGuan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

While working on v1.0.5-maint (the branch in use on Fedora 19)
with the host at Fedora 20, I got a failure in virstoragetest.
I traced it to the fact that we were using qemu-img to create a
qcow2 file, but qemu-img changed from creating v2 files by
default in F19 to creating v3 files in F20.  Rather than leaving
it up to qemu-img, it is better to write the test to force
testing of BOTH file formats (better code coverage and all).

This patch alone does not fix all the failures in v1.0.5-maint;
for that, we must decide to either teach the older branch to
understand v3 files, or to reject them outright as unsupported.
But for upstream, making the test less dependent on changing
qemu-img defaults is always a good thing.

* tests/virstoragetest.c (testPrepImages): Simplify creation of
raw file; check if qemu supports compat and if so use it.
Signed-off-by: NEric Blake <eblake@redhat.com>

For a "newfd1" the coverity tools thinks that the fd is closed in
a "virCommandPassFD", but with "flags == 0" it cannot be closed.

The code itself is ok, but coverity tool thinks that there is
"double_close" of the "newfd1" and to prevent showing this error
we simply add a comment before the proper close.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Strings "file" and "context" may not be freed if "VIR_EXPAND_N" fails
and it leads into memory leak.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

While running objecteventtest, it was found that valgrind pointed out the
following memory leak:

==125== 538 (56 direct, 482 indirect) bytes in 1 blocks are definitely lost in loss record 216 of 226
==125==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==125==    by 0x4C65D8D: virAllocVar (viralloc.c:558)
==125==    by 0x4C9F055: virObjectNew (virobject.c:190)
==125==    by 0x4D2B2E8: virGetDomain (datatypes.c:220)
==125==    by 0x4D79180: testDomainDefineXML (test_driver.c:2962)
==125==    by 0x4D4977D: virDomainDefineXML (libvirt.c:8512)
==125==    by 0x4029C2: testDomainCreateXMLMixed (objecteventtest.c:226)
==125==    by 0x403A21: virtTestRun (testutils.c:138)
==125==    by 0x4021C2: mymain (objecteventtest.c:549)
==125==    by 0x4040C2: virtTestMain (testutils.c:593)
==125==    by 0x341F421A04: (below main) (libc-start.c:225)
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When idmap was added to LXC, we forgot to cover it in the testsuite.
The schema was missing an <element> layer, and as a result,
virt-xml-validate was failing on valid dumpxml output.

Reported by Eduard - Gabriel Munteanu on IRC.

* docs/schemas/domaincommon.rng (idmap): Include <idmap> element,
and support interleaves.
* tests/lxcxml2xmldata/lxc-idmap.xml: New file.
* tests/lxcxml2xmltest.c (mymain): Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

If a user registers for a domain event filtered to a particular
domain, but the persistent domain is offline at the time, then
the code silently failed to set up the filter.  As a result,
the event fires for all domains, rather than being filtered.
Network events were immune, since they always passed an id
0 argument.

The key to this patch is realizing that
virObjectEventDispatchMatchCallback() only cared about uuid;
so refusing to create a meta for a negative id is pointless,
and in fact, malloc'ing meta at all was overkill; instead,
just directly store a uuid and a flag of whether to filter.

Note that virObjectEventPtr still needs all fields of meta,
because this is how we reconstruct a virDomainPtr inside the
dispatch handler before calling the end user's callback
pointer with the correct object, even though only the uuid
portion of meta is used in deciding whether a callback
matches the given event.  So while uuid is optional for
callbacks, it is mandatory for events.

The change to testDomainCreateXMLMixed is merely on the setup
scenario (as you can't register for a domain unless it is either
running or persistent).  I actually first wrote that test for
this patch, then rebased it to also cover a prior patch (commit
4221d64f), but had to adjust it for that patch to use Create
instead of Define for setting up the domain long enough to
register the event in order to work around this bug.  But while
the setup is changed, the main body of the test is still about
whether creation events fire as expected.

* src/conf/object_event_private.h (_virObjectEventCallback):
Replace meta with uuid and flag.
(virObjectEventCallbackListAddID): Update signature.
* src/conf/object_event.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventNew): Document
use of name and uuid in events.
* src/conf/object_event.c (virObjectEventCallbackListAddID): Drop
arguments that don't affect filtering.
(virObjectEventCallbackListRemoveID)
(virObjectEventDispatchMatchCallback)
(virObjectEventStateRegisterID): Update clients.
* src/conf/domain_event.c (virDomainEventCallbackListAdd)
(virDomainEventStateRegisterID): Likewise.
* src/conf/network_event.c (virNetworkEventStateRegisterID):
Likewise.
* tests/objecteventtest.c (testDomainCreateXMLMixed): Enhance test.
Signed-off-by: NEric Blake <eblake@redhat.com>

Consider these two calls, in either order:

id1 = virConnectDomainEventRegisterAny(conn, NULL,
   VIR_DOMAIN_EVENT_ID_LIFECYCLE,
   VIR_DOMAIN_EVENT_CALLBACK(callback), NULL, NULL);
virConnectDomainEventRegister(conn, callback, NULL, NULL);

Right now, the second call fails, because under the hood, the
old-style function registration is tightly coupled to the
new style lifecycle eventID, and the two calls both try
to register the same global eventID callback representation.

We've alreay documented that users should avoid old-style
registration and deregistration, so anyone heeding the advice
won't run into this situation.  But it would be even nicer if
we pretend the two interfaces are completely separate, and
disallow any cross-linking.  That is, a call to old-style
deregister should never remove a new-style callback even if it
is the same function pointer, and a call to new-style callback
using only callbackIDs obtained legitimately should never
remove an old-style callback (of course, since our callback
IDs are sequential, and there is still coupling under the
hood, you can easily guess the callbackID of an old style
registration and use new-style deregistration to nuke it - but
that starts to be blatantly bad coding on your part rather
than a surprising result on what looks like reasonable
stand-alone API).

With this patch, you can now register a global lifecycle event
handler twice, by using both old and new APIs; if such an event
occurs, your callback will be entered twice.  But that is not a
problem in practice, since it is already possible to use the
new API to register both a global and per-domain event handler
using the same function, which will likewise fire your callback
twice for that domain.  Duplicates are still prevented when
using the same API with same parameters twice (old-style twice,
new-style global twice, or new-style per-domain with same domain
twice), and things are still bounded (it is not possible to
register a single function pointer more than N+2 times per event
id, where N is the number of domains available on the connection).
Besides, it has always been possible to register as many
separate function pointers on the same event id as desired,
through either old or new style API, where the bound there is
the physical limitation of writing a program with enough
distinct function pointers.

Adding another event registration in the testsuite is sufficient
to cover this, where the test fails without the rest of the patch.

* src/conf/object_event.c (_virObjectEventCallback): Add field.
(virObjectEventCallbackLookup): Add argument.
(virObjectEventCallbackListAddID, virObjectEventStateCallbackID):
Adjust callers.
* tests/objecteventtest.c (testDomainCreateXMLMixed): Enhance test.
Signed-off-by: NEric Blake <eblake@redhat.com>

When determining if a device is behind a PCI bridge, the PCI device
class is checked by reading the config space. However, there are some
devices which have the wrong class on the config space, but the class is
initialized by Linux correctly as a PCI BRIDGE. This class can be read
by the sysfs file '/sys/bus/pci/devices/xxxx:xx:xx.x/class'.

One example of such bridge is IBM PCI Bridge 1014:03b9, which is
identified as a Host Bridge when reading the config space.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>

Bah, serves me right for merging patches without one last
compile test.
Signed-off-by: NEric Blake <eblake@redhat.com>

Right now, the older virConnectDomainEventRegister (takes a
function pointer, returns 0 on success) and the newer
virConnectDomainEventRegisterID (takes an eventID, returns a
callbackID) share the underlying implementation (the older
API ends up consuming a callbackID for eventID 0 under the
hood).  We implemented that by a lot of copy and pasted
code between object_event.c and domain_event.c, according to
whether we are dealing with a function pointer or an eventID.
However, our copy and paste is not symmetric.  Consider this
sequence:

id1 = virConnectDomainEventRegisterAny(conn, dom,
   VIR_DOMAIN_EVENT_ID_LIFECYCLE,
   VIR_DOMAIN_EVENT_CALLBACK(callback), NULL, NULL);
virConnectDomainEventRegister(conn, callback, NULL, NULL);
virConnectDomainEventDeregister(conn, callback);
virConnectDomainEventDeregsiterAny(conn, id1);

the first three calls would succeed, but the third call ended
up nuking the id1 callbackID (the per-domain new-style handler),
then the fourth call failed with an error about an unknown
callbackID, leaving us with the global handler (old-style) still
live and receiving events.  It required another old-style
deregister to clean up the mess.  Root cause was that
virDomainEventCallbackList{Remove,MarkDelete} were only
checking for function pointer match, rather than also checking
for whether the registration was global.

Rather than playing with the guts of object_event ourselves
in domain_event, it is nicer to add a mapping function for the
internal callback id, then share common code for event removal.
For now, the function-to-id mapping is used only internally;
I thought about whether a new public API to let a user learn
the callback would be useful, but decided exposing this to the
user is probably a disservice, since we already publicly
document that they should avoid the old style, and since this
patch already demonstrates that older libvirt versions have
weird behavior when mixing old and new styles.

And like all good bug fix patches, I enhanced the testsuite,
validating that the changes in tests/ expose the failure
without the rest of the patch.

* src/conf/object_event.c (virObjectEventCallbackLookup)
(virObjectEventStateCallbackID): New functions.
(virObjectEventCallbackLookup): Use helper function.
* src/conf/object_event_private.h (virObjectEventStateCallbackID):
Declare new function.
* src/conf/domain_event.c (virDomainEventStateRegister)
(virDomainEventStateDeregister): Let common code handle the
complexity.
(virDomainEventCallbackListRemove)
(virDomainEventCallbackListMarkDelete)
(virDomainEventCallbackListAdd): Drop unused functions.
* tests/objecteventtest.c (testDomainCreateXMLMixed): New test.
Signed-off-by: NEric Blake <eblake@redhat.com>