For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libvirt.pc file we install is ending up polluted with a
load of compiler flags that should be private to the libvirt
build. eg

Libs: -L${libdir} -lvirt -ldl -O2 -g -pipe -Wall \
      -Wp,-D_FORTIFY_SOURCE=2 -fexceptions \
      -fstack-protector-strong --param=ssp-buffer-size=4 \
      -grecord-gcc-switches  -m64 -mtune=generic

this is caused by including @libs@ in the Libs: line of the
pkgconfig.pc.in file.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

One of previous commits (e6258a33) tried to build the huge page code
only on Linux since it's Linux centric indeed. But it failed miserably
as it used 'WITH_LINUX' which is an automake conditional not a gcc
one. In the sources we need to use __linux__.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.

qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).

Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.

ioctl returns -1, not the errno value

Only three other callers possibly call closedir on a NULL argument.
Even though these probably won't be used on FreeBSD where this crashes,
let's be nice and only call closedir on an actual directory stream.

==== Invalid write of size 4
====    at 0x52E678C: virNumaGetDistances (virnuma.c:479)
====    by 0x5396890: nodeCapsInitNUMA (nodeinfo.c:1796)
====    by 0x203C2B: virQEMUCapsInit (qemu_capabilities.c:960)
====  Address 0xe10a1e0 is 0 bytes after a block of size 0 alloc'd
====    at 0x4C2A6D0: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
====    by 0x52A10D6: virAllocN (viralloc.c:191)
====    by 0x52E674D: virNumaGetDistances (virnuma.c:470)
====    by 0x5396890: nodeCapsInitNUMA (nodeinfo.c:1796)
====    by 0x203C2B: virQEMUCapsInit (qemu_capabilities.c:960)

The hugepage sizing and counting code gathers the information from sysfs
and thus isn't portable. Stub it out for non-Linux so that we can report
a better error. This patch also avoids calling sysinfo() on Mingw where
it isn't supported.

Don't return possibly incomplete result if virDirRead fails.

makefile_conditionals
tests/Makefile.am:293:endif
maint.mk: match "if FOO" with "endif FOO" in Makefiles
make: *** [sc_makefile_conditionals] Error 1

'virstoragetest' accesses backing chains of files on local storage with
the help of the storage driver. Disable the test on builds without the
storage driver as the test is crashing otherwise.

Reported by: Roman Bogorodskiy

It returns NULL on failure. Checking if the negation of it
is less than zero makes no sense. (Found by coverity after moving
the code)

In another case, the return value wasn't checked at all.

Just code movement and rename.

Migration code specifies the problematic non-cooperative resume mode
which is a known issue with Xen's libxl [1].  Instead, use the better
supported cooperative mode.

Without this, guests BUG() in xen_irq_resume after failing to bind
still-bound event channels.

[1] http://bugs.xenproject.org/xen/bug/30

So far three ARM processor families are known to libvirt,
however the cpu driver knows only about one of them. This
make host initialization on the other two fail:

2014-06-17 13:35:41.419+0000: 6840: info : libvirt version: 1.2.6
2014-06-17 13:35:41.419+0000: 6840: error : cpuNodeData:342 : this function is not supported by the connection driver: cannot get node CPU data for armv6l architecture
2014-06-17 13:35:41.433+0000: 6840: warning : virQEMUCapsInit:943 : Failed to get host CPU
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virNodeParseSocket() function tries to get socked ID from
'topology/physical_package_id' file. However, on some architectures
the file contains the -1 constant which makes in turn libvirt think
the info extraction was unsuccessful. If that's the case, we need to
overwrite the obtained integer with zero like we are doing for other
architectures.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, we are opening the cpuinfo file via fopen() which if fails
doesn't print any error message. We should do that instead.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As in previous commit, there are again some places where we can do
runtime decision instead of compile time. This time it's whether the
'topology/physical_package_id' is allowed to have '-1' within or not.
Then, core ID is pared differently on s390(x) than on the rest of
architectures.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far, we are doing compile time decisions on which architecture is
used. However, for testing purposes it's much easier if we pass host
architecture as parameter and then let the function decide which code
snippet for extracting host CPU info will be used.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This modifies the formatting function of virInterface to be a proper
mirror of the parse function, including the addition of a
"parentIfType" arg so that we can decide whether or not it is
appropriate to emit the elements that are only in toplevel interfaces,
as well as the <link> element (which isn't allowed for bridge
interfaces).

Since the restructuring of the code necessarily changes the order of
some of the elements, some test case data had to be updated.

the switch cases for the 4 different interface types had repetitive
code which has now been pulled out as common. While touching those
lines, some extra usage of "!= NULL" etc has been eliminated to make
things more compact and inline with current coding practices.

NB: parentIfType == VIR_INTERFACE_TYPE_LAST means that this is a
toplevel interface (not a subordinate of a bridge or bond). Only
toplevel interfaces can have a start mode, mtu, or IP address element.

For some reason the bridge stp mode and delay were put directly into
the "bridge" case of the switch in virInterfaceDefParseXML(), although
they are inside the <bridge> element, and so should be parsed in the
function created for that purpose - virInterfaceBridgeDefFormat().

The interface state for bonds and vlans does seem to reflect the state
of the underlying physical devices, at least in some cases, so it
makes sense to allow reporting it (netcf now does).

The link state/speed for bridge devices is meaningless though, so we
don't even look for it.

I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.

Also remove one spurious ATTRIBUTE_UNUSED guarding the @migrated
argument.

The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.

It will also be reused later.

Generally, <interface> ... <script> is only supported for
type='ethernet'.  Due to the long and pervasive use of

  <interface type='bridge'>
    ...
    <script path='foo'/>
  </interface>

in Xen domain configuration, it was agreed to allow the use
of <script> with type='bridge' for backwards compatibility.  See
the following discussion thread

http://www.redhat.com/archives/libvir-list/2013-April/msg00755.html

This patch limits the use of <script> to interface types ethernet
and bridge, raising an unsupported config error if <script> is
specified for all other interface types.

While at it, use VIR_ERR_CONFIG_UNSUPPORTED instead of
VIR_ERR_INTERNAL_ERROR when reporting unsupported interface types.

Add support for <interface type='network'> in the libxl driver.

Commit 9e3efe53 broke the build under valgrind or clang, by writing
8 bytes through an allocation of 4 bytes.  It also risks multiplication
overflow when mallocing (that's a pervasive problem that needs an
audit in the rest of the code, but we might as well fix this one while
we are here), and had a typo.

* tools/virsh-host.c (cmdFreepages): Avoid integer overflow and
undefined behavior.
Signed-off-by: NEric Blake <eblake@redhat.com>

The interface xml schema was written with strict rules about the
ordering of the elements. This was never intentional, but just due to
omission of <interleave> in the appropriate places. This patch just
adds in <interleave> wherever there is more than one element, and
re-indents everything else appropriately.

In section "Block / character devices" of "Host device assignment",
the description of hostdev element has some error:

For a block device, the type should be "storage", not "block";
For a character device, the type should be "misc", not "char".
Signed-off-by: NJincheng Miao <jmiao@redhat.com>

And add stubs to other drivers like: lxc, qemu, uml and vbox.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The new API is exposed under 'freepages' command.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:

<capabilities>

  <host>
    <uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
    <cpu>
      <arch>x86_64</arch>
      <model>Westmere</model>
      <vendor>Intel</vendor>
      <topology sockets='1' cores='1' threads='1'/>
      ...
      <pages unit='KiB' size='4'/>
      <pages unit='KiB' size='2048'/>
      <pages unit='KiB' size='1048576'/>
    </cpu>
    ...
    <topology>
      <cells num='4'>
        <cell id='0'>
          <memory unit='KiB'>4054408</memory>
          <pages unit='KiB' size='4'>1013602</pages>
          <pages unit='KiB' size='2048'>3</pages>
          <pages unit='KiB' size='1048576'>1</pages>
          <distances/>
          <cpus num='1'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>4071072</memory>
          <pages unit='KiB' size='4'>1017768</pages>
          <pages unit='KiB' size='2048'>3</pages>
          <pages unit='KiB' size='1048576'>1</pages>
          <distances/>
          <cpus num='1'>
            <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
          </cpus>
        </cell>
        ...
      </cells>
    </topology>
    ...
  </host>

  <guest/>

</capabilities>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For future work we need two functions that fetches total number of
pages and number of free pages for given NUMA node and page size
(virNumaGetPageInfo()).

Then we need to learn pages of what sizes are supported on given node
(virNumaGetPages()).

Note that system page size is disabled at the moment as there's one
issue connected. If you have a NUMA node with huge pages allocated the
kernel would return the normal size of memory for that node. It
basically ignores the fact that huge pages steal size from the system
memory. Until we resolve this, it's safer to not confuse users and
hence not report any system pages yet.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For future work we want to get info for not only the free memory
but overall memory size too. That's why the function must have
new signature too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>