Namely, virFileGetACLs, virFileSetACLs, virFileFreeACLs and
virFileCopyACLs. These functions are going to be required when we
are creating /dev for qemu. We have copy anything that's in
host's /dev exactly as is. Including ACLs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This part of code that LXC currently uses will be reused so move
to a generic function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This part of code that LXC currently uses will be reused so move
to a generic function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libvirt libxl picks its own default with respect to the default NIC
to use. libxlMakeNic is the one responsible for this and on boot it
picks LIBXL_NIC_TYPE_VIF_IOEMU for HVM domains such that it accomodates
both PV and emulated one. The good behaving guest at boot will then
select the pv and unplug the emulated device.

Now, on HVM when attaching an interface it will pick the same default
that is LIBXL_NIC_TYPE_VIF_IOEMU which as a result will fail the attach
(see xen commit 32e9d0f ("libxl: nic type defaults to vif in hotplug for
hvm guest"). Xen doesn't yet support the hotplug of emulated devices,
but we don't want to rule out that case either, which might get support
in the future. Hence we simply reverse the defaults when we are
attaching the interface which allows libvirt to prefer the PV nic first
without adding "model='netfront'" following the same pattern as above
commit. Also to avoid ruling out the emulated one we set to
LIBXL_NIC_TYPE_IOEMU when setting a model type that is not 'netfront'.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

If libxl has QED disk format support, then pass the feature
over to the user.

Without a default: case in the switches in xenParseXLDisk(), build
would fail with every new disk backend or image format added in libxl,
as this is the case in this error:

http://logs.test-lab.xenproject.org/osstest/logs/103325/build-amd64-libvirt/5.ts-libvirt-build.log

The virDomainSendProcessSignal method says the flags values
come from virDomainProcessSignalFlag, but this enum has
never existed. No flags are needed for this method.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Almost none of our virJSONValue*Get* functions accept const virJSONValue
pointers and it wouldn't even make sense since we sometimes modify what
we get. And because there is no reason for preventing callers of
virJSONValueObjectForeachKeyValue from modifying the values they get in
each iteration we can just stop doing it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Using a variable named 'stat' clashes with the system function
'stat()' causing compiler warnings on some platforms

cc1: warnings being treated as errors
../../src/qemu/qemu_monitor_text.c: In function 'parseMemoryStat':
../../src/qemu/qemu_monitor_text.c:604: error: declaration of 'stat' shadows a global declaration [-Wshadow]
/usr/include/sys/stat.h:455: error: shadowed declaration is here [-Wshadow]
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

'log_outputs' would be read into the variable for log_filters

'log_outputs' would be read into the variable for log_filters

If the cpuset cgroup controller is disabled in /etc/libvirt/qemu.conf
QEMU virtual machines can in principle use all host CPUs, even if they
are hot plugged, if they have no explicit CPU affinity defined.

However, there's libvirt code supposed to handle the situation where
the libvirt daemon itself is not using all host CPUs. The code in
qemuProcessInitCpuAffinity attempts to set an affinity mask including
all defined host CPUs. Unfortunately, the resulting affinity mask for
the process will not contain the offline CPUs. See also the
sched_setaffinity(2) man page.

That means that even if the host CPUs come online again, they won't be
used by the QEMU process anymore. The same is true for newly hot
plugged CPUs. So we are effectively preventing that QEMU uses all
processors instead of enabling it to use them.

It only makes sense to set the QEMU process affinity if we're able
to actually grow the set of usable CPUs, i.e. if the process affinity
is a subset of the online host CPUs.

There's still the chance that for some reason the deliberately chosen
libvirtd affinity matches the online host CPU mask by accident. In this
case the behavior remains as it was before (CPUs offline while setting
the affinity will not be used if they show up later on).
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Tested-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>

The functions to retrieve online and present host CPU information
are only supported on Linux for the time being.

This leads to runtime errors if these function are used on other
platforms. To avoid that, code in higher levels using the functions
must replicate the conditional compilation in higher level which
is error prone (and is plainly spoken ugly).

Adding a function virHostCPUHasBitmap that can be used to check
for host CPU bitmap support.

NB: There are other functions including the host CPU count that
are lacking support on all platforms, but they are too essential
in order to be bypassed.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

virQEMUCapsFindTarget is supposed to find an alternative QEMU binary if
qemu-system-$GUEST_ARCH doesn't exist. The alternative is using host
architecture when it is compatible with $GUEST_ARCH. But a special
treatment has to be applied for ppc64le since the QEMU binary is always
called qemu-system-ppc64.

Broken by me in v2.2.0-171-gf2e71550.

https://bugzilla.redhat.com/show_bug.cgi?id=1403745Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This patch adds support and documentation
for the branch_misses perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

qemuAgentNotifyEvent accesses monitor structure and is called on qemu
reset/shutdown/suspend events under domain lock. Other monitor
functions on the other hand take monitor lock and don't hold domain lock.
Thus it is possible to have risky simultaneous access to the structure
from 2 threads. Let's take monitor lock here to make access exclusive.

Current call to qemuAgentGetFSInfo in qemuDomainGetFSInfo is
unsafe. Domain lock is dropped and we use vm->def. Let's make
def copy to fix that.

In case of 0 filesystems *info is not set while according
to virDomainGetFSInfo contract user should call free on it even
in case of 0 filesystems. Thus we need to properly set
it. NULL will be enough as free eats NULLs ok.

The libvirt-domain.h documentation indicates that for a qcow2 file
in a filesystem being used for a backing store should report the disk
space occupied by a file; however, commit id '15fa84ac' altered the
code to trust that the wr_highest_offset should be used whenever
wr_highest_offset_valid was set.

As it turns out this will lead to indeterminite results. For an active
domain when qemu hasn't yet had the need to find the wr_highest_offset
value, qemu will report 0 even though qemu-img will report the proper
disk size. This causes reporting of the following XML:

  <disk type='file' device='disk'>
    <driver name='qemu' type='qcow2'/>
    <source file='/path/to/test-1g.qcow2'/>

to be as follows:

Capacity:       1073741824
Allocation:     0
Physical:       1074139136

with qemu-img indicating:

image: /path/to/test-1g.qcow2
file format: qcow2
virtual size: 1.0G (1073741824 bytes)
disk size: 1.0G

Once the backing source file is opened on the guest, then wr_highest_offset
is updated, but only to the high water mark and not the size of the file.

This patch will adjust the logic to check for the file backed qcow2 image
and enforce setting the allocation to the returned 'physical' value, which
is the 'actual-size' value from a 'query-block' operation.

NB: The other consumer of the wr_highest_offset output (GetAllDomainStats)
has a contract that indicates 'allocation' is the offset of the highest
written sector, so it doesn't need adjustment.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfo to get capacity specific data
about the storage backing source or volume -- create a common API
to handle the details for both.

As a side effect, virStorageFileProbeFormatFromBuf returns to being
a local/static helper to virstoragefile.c

For the QEMU code - if the probe is done, then the format is saved so
as to avoid future such probes.

For the storage backend code, there is no need to deal with the probe
since we cannot call the new API if target->format == NONE.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfoFD to fill in the storage backing
source or volume allocation, capacity, and physical values - create a
common API that will handle the details for both.

The common API will fill in "default" capacity values as well - although
those more than likely will be overridden by subsequent code. Having just
one place to make the determination of what the values should be will
make things be more consistent.

For the QEMU code - the data filled in will be for inactive domains
for the GetBlockInfo and DomainGetStatsOneBlock API's. For the storage
backend code - the data will be filled in during the volume updates.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id '8dc27259' introduced virStorageSourceUpdateBlockPhysicalSize
in order to retrieve the physical size for a block backed source device
for an active domain since commit id '15fa84ac' changed to use the
qemuMonitorGetAllBlockStatsInfo and qemuMonitorBlockStatsUpdateCapacity
API's to (essentially) retrieve the "actual-size" from a 'query-block'
operation for the source device.

However, the code only was made functional for a BLOCK backing type
and it neglected to use qemuOpenFile, instead using just open. After
the open the block lseek would find the end of the block and set the
physical value, close the fd and return.

Since the code would return 0 immediately if the source device wasn't
a BLOCK backed device, the physical would be displayed incorrectly,
such as follows in domblkinfo for a file backed source device:

Capacity:       1073741824
Allocation:     0
Physical:       0

This patch will modify the algorithm to get the physical size for other
backing types and it will make use of the qemuDomainStorageOpenStat
helper in order to open/stat the source file depending on its type.
The qemuDomainGetStatsOneBlock will no longer inhibit printing errors,
but it will still ignore them leaving the physical value set to 0.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Currently just a shim to call virStorageSourceUpdateBlockPhysicalSize
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Split out the opening of the file and fetch of the stat buffer into a
helper qemuDomainStorageOpenStat. This will handle either opening the
local or remote storage.

Additionally split out the cleanup of that into a separate helper
qemuDomainStorageCloseStat which will either close the file or
call the virStorageFileDeinit function.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Originally added by commit id '89646e69' prior to commit id '15fa84ac'
and '71d2c172' which ensured that qemuStorageLimitsRefresh was only called
for inactive domains.

Adjust the comment describing the need for FIXME and move all the text
to the function description.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Lost during merge of commit id '8546adf8' and '585ad00b'

This flag is used in Virtuozzo backend implicitly, thus
we need to support it and don't fail if it's set.
Signed-off-by: NPavel Glushchak <pglushchak@virtuozzo.com>

This flag tells backend not to create instance
disks making behavior the same as in qemu driver.
Disk files have to be created beforehand on target
host manually or by upper management layer i.e.
OpenStack Nova.
Signed-off-by: NPavel Glushchak <pglushchak@virtuozzo.com>

When save/migrate a domain and we autogenerated a port, then if we
print the inactive domain config, write out a -1 for the socket value;
otherwise, it's possible that the subsequent start will fail if the
autogenerated websocket used conflicts with an existing running config
that also used autogenerated websockets.

Examples:

== A. Can not restore domain with autoconfigured websocket.

domain 1 and 2 have autoconfigured websocket.

1. domain 1 is started then, saved
2. domain 2 is started
3. domain 1 restoration is failed:

error: internal error: qemu unexpectedly closed the monitor: 2016-11-21T10:23:11.356687Z
qemu-kvm: -vnc 0.0.0.0:2,websocket=5700: Failed to start VNC server on `(null)':
Failed to bind socket: Address already in use

== B. Can not migrate domain with autoconfigured websocket.

domain 1 on host A, domain 2 on host B, both have autoconfigured websocket

1. domain 1 started, domain 2 started
2. domain 1 migration to host B is failed with the above error.

We need extra state variable to distinguish between autogenerated
and user defined cases after auto generation is done.

Use switch for enums rather than if/else conditions.

The variable may be used uninitialized in this function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is just a code move of virstat.c to virnetdevtap.c

In preparation to the code move to virnetdevtap.c, this change:

* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
  method in virnetdevtap.c.
* Add the attributes checker

When vhostuser interfaces are used, the interface statistics
are not available in /proc/net/dev.

This change looks at the openvswitch interfaces statistics
tables to provide this information for vhostuser interface.

Note that in openvswitch world drop/error doesn't always make sense
for some interface type. When these informations are not available we
set them to 0 on the virDomainInterfaceStats.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There's nothing to compress if the requested snapshot memory format is
set to 'raw' explicitly. After commit 9e14689e libvirt would try to
run /sbin/raw to process the memory stream if the qemu.conf option
snapshot_image_format is set.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1402726

If the monitor doesn't hold a reference to the domain object
the object may be destroyed before the monitor actually stops.

Since its introduction in 2012 this internal API did nothing.
Moreover we have the same API that does exactly the same:
virSecurityManagerDomainSetPathLabel.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:

   /hugepageMount/libvirt/qemu

Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:

   /hugepageMount/libvirt/qemu/domainName

and chown domainName dir to the user that domain is configured to
run under.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>