Just a new feature that can be turned on/off.

https://bugzilla.redhat.com/show_bug.cgi?id=1178853Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

QEMU supports feature specification with -cpu host and we just skip
using that.  Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Network interfaces devices and host devices with net capabilities can
now have IPv4 and/or an IPv6 routes configured.

Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.

Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.

Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.

This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.

To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.

This will be later populated with the guest state of the channel.

Additionally, make the <bootloader> tag optional (for bhyveload with
custom arguments) (also, matches the actual parser).

Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: NMatthias Gatto <matthias.gatto@outscale.com>

CPU numa topology implicitly allows memory specification in 'KiB'.

Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.

    <numa>
      <cell cpus='0-3' memory='1024' unit='MiB' />
      <cell cpus='4-7' memory='1024' unit='MiB' />
    </numa>

Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.

The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.

This patch adds parsing/formatting code as well as documentation for
shared memory devices.  This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.

In the devices section in the domain XML users may specify:

- For shmem device using a server:

 <shmem name='shmem0'>
   <server path='/tmp/socket-ivshmem0'/>
   <size unit='M'>32</size>
   <msi vectors='32' ioeventfd='on'/>
 </shmem>

- For ivshmem device not using an ivshmem server:

 <shmem name='shmem1'>
   <size unit='M'>32</size>
 </shmem>

Most of the configuration is made optional so it also allows
specifications like:

 <shmem name='shmem1/>
 <shmem name='shmem2'>
   <server/>
 </shmem>
Signed-off-by: NMaxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add options for tuning segment offloading:
<driver>
  <host csum='off' gso='off' tso4='off' tso6='off'
        ecn='off' ufo='off'/>
  <guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.

Each attribute is optional, commit af8b4a2e forgot to mention that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add the 'rawio' attribute to match _virDomainDiskDef and process the
hostdev XML similarly to the disk XML for a lun which supports/requires rawio

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>

I noticed this with the recent iothread pinning code, but the
problem existed longer than that. The XML validation required
users to supply <cputune> children in a strict order, even though
there was no conceptual reason why they can't occur in any order.

docs/ changes best viewed with -w

* docs/schemas/domaincommon.rng (cputune): Add interleave.
* tests/qemuxml2argvdata/qemuxml2argv-cputune-iothreads.xml: Swap
up order, copying canonical form...
* tests/qemuxml2xmloutdata/qemuxml2xmlout-cputune-iothreads.xml:
...here.
* tests/qemuxml2xmltest.c (mymain): Mark the difference.
Signed-off-by: NEric Blake <eblake@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1101574

Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.

The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.

When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.

Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device.  The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.

QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).

The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:

  <hostdev mode='subsystem' type='scsi' managed='yes'>
    <source protocol='iscsi' name='iqn.1992-01.com.example'>
      <host name='example.org' port='3260'/>
      <auth username='myname'>
        <secret type='iscsi' usage='mycluster_myname'/>
      </auth>
    </source>
    <address type='drive' controller='0' bus='0' target='2' unit='5'/>
  </hostdev>

The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.

A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: NEric Blake <eblake@redhat.com>

Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment.  In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job.  Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.

A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion.  But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job.  Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job.  Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.

Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.

* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

  <memoryBacking>
    <hugepages>
      <page size="1" unit="G" nodeset="0-3,5"/>
      <page size="2" unit="M" nodeset="4"/>
    </hugepages>
  </memoryBacking>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

* docs/schemas/domaincommon.rng: Add bhyve domain type, nmdm
  serial type and master and slave optional attributes for
  serial that are used by nmdm
* tests/domainschematest: Add bhyvexml2argvdata directory
  to validate bhyve XMLs

Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.

LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:

    <interface type='network'>
      <source network='default'/>
      <guest dev="eth1"/>
    </interface>

In this example the network card will appear as eth1 in the guest.

The previous commit 09d4d261 put the interleave at the wrong point;
it didn't allow interleaving with <memory>.

* docs/schema/domaincommon.rng (numatune): Fix interleave location.
* tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode.xml: Adjust test.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>