This basically covers the talking-to-monitor part of
virQEMUCapsInitQMP.  The patch itself has no real value,
but it creates an entity to be tested in the next patches.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

- configure.ac docs/news.html.in libvirt.spec.in: update for release
- po/*.po*: updated localization and regenerated

This adds a test for the version string of VMware Fusion.

We forgot to do cleanup when lxcContainerMountFSTmpfs
failed to bind fs as read-only.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The libvirtd server pushes data out to clients. It does not
know what protocol version the client might have, so must be
conservative and use the old payload limits. ie send no more
than 256kb of data per packet.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.

The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.

 [0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370

mmap's offset must be aligned to page size or mapping will fail.
mmap-based safezero is only used if posix_fallocate isn't available.
Signed-off-by: NOskari Saarenmaa <os@ohmu.fi>

Fixed the retrieval of the AdapterId from the AdapterName of the
hostdev source so it does return an error instead of leaving the
adapter_id uninitialized.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Check return value of virStreamNew when called by cmdVolUpload and
cmdVolDownload.

The change in ef29de14 that introduced
better error logging from qemu introduced a warning from coverity about
unused return value from lseek. Silence this warning and fix typo in the
corresponding error message.

Reported by: John Ferlan

The memory size in virNodeGetInfo python API binding is reported in MiB
instead of KiB (like we have in C struct). However, there already might
be applications out there relying on this inconsistence so we can't
simply fix it. Document this sad fact as known bug.

Add support for VMware Fusion in the existing VMware driver.  Connect
via the URI vmwarefusion:///session

Currently the VMware version check code only supports two types of
VMware backends, Workstation and Player. But in the near future we will
have an additional one so we need to support more. Additionally, we
discover and cache the path to the vmrun binary so we should use that
path when using the corresponding binary from the VMware VIX SDK.

'make distcheck' fails from a directory configured --without-lxc:

  GEN      virt-login-shell.1
Can't write-open ../../tools/virt-login-shell.1: Permission denied at /usr/bin/pod2man line 69.

* tools/Makefile.am (EXTRA_DIST): Ship pre-built man page.
Signed-off-by: NEric Blake <eblake@redhat.com>

Another case missed by commits 716c7bb1 and 6973e02b.

* src/Makefile.am (VIR_NET_RPC_GENERATED): Drop $(srcdir).
(libvirt_net_rpc_la_SOURCES): List generated files more compactly.
Signed-off-by: NEric Blake <eblake@redhat.com>

When running 'make dist' on a system without policykit, we currently
fail. This is because $(srcdir)/access/org.libvirt.api.policy is in
EXTRA_DIST, however, the rule to generate the file is conditional
whether we build with polkit or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, we have functions to handle fc_host implemented just
for linux. On all other platforms an error is thrown. It makes no
sense to run the test on those platforms then.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On some systems (linux, cygwin and gnukfreebsd) rpcgen generates files
which when compiling produces this warning:

remote/remote_protocol.c: In function 'xdr_remote_node_get_cpu_stats_ret':
remote/remote_protocol.c:530: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]

Hence, on those systems we need to post-process the files by the
rpc/genprotocol.pl perl script. At the beginning of the script the OS is
detected via $^O perl variable. From my latest build on FreeBSD I see we
need to fix the code there too. On FreeBSD the variable contains
'freebsd' string:

http://perldoc.perl.org/perlport.html#PLATFORMSSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

The debug message said there was a timeout of 0 pending for -1 ms which
made me think this is where a hang was coming from but according to the
function comments this case means that there is no timeout pending so
make the debug message say that instead of saying there's a -1 ms
timeout.

While BSDs don't support process creation timestamp information via
PEERCRED for Unix sockets, we need to actually initialize the value
because it is used by the libvirt code.

Ensure that the socket credentials we got back on BSD are valid before
using them.

When a client disconnects from libvirtd, all event callbacks
must be removed. This involves running the public API

  virConnectDomainEventDeregisterAny

This code does not run in normal API dispatch context, so no
identity was set. The result was that the access control drivers
denied the attempt to deregister callbacks. The callbacks thus
continued to trigger after the client was free'd causing fairly
predictable use of free memory & a crash.

This can be triggered by any client with readonly access when
the ACL drivers are active.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
          autoport='yes' listen='127.0.0.1'
          defaultMode='secure'>

However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.

This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case A)

While activeScsiHostdevs and webSocketPorts were allocated in
qemuStateInitialize, they were not freed in qemuStateCleanup.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case D)

qemuProcessStart created two references to virQEMUDriverConfigPtr before
calling fork():

    cfg = virQEMUDriverGetConfig(driver);
    ...
    hookData.cfg = virObjectRef(cfg);

However, the child only unreferenced hookData.cfg and the parent only
removed the cfg reference. That said, we don't need to increment the
reference counter when assigning cfg to hookData. Both the child and the
parent will correctly remove the reference on cfg (the child will do
that through hookData).
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Similar to commit 8f34f195.

* tests/Makefile.am (virnetserverclienttest_CFLAGS): Add XDR_CFLAGS.
Signed-off-by: NEric Blake <eblake@redhat.com>

Removed superfluous/wrong srcdir prefix.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1012818

Commit 6d7d0b18 (in 1.1.2) added bounds
checking to virDomainGetJobStats. But even at that time the API was able
to return 20 parameters while the limit was set to 16.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

s/becuase/because/
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

* src/lxc/lxc_controller.c (virLXCControllerSetupDisk): Fix typo.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Caused by commit 012c25e8 splitting out a convenience library.

  CC       libvirtd_conf_la-libvirtd-config.lo
In file included from ../src/rpc/virnetmessage.h:24:0,
                 from ../src/rpc/virnetserverprogram.h:27,
                 from ../src/rpc/virnetserver.h:32,
                 from libvirtd-config.c:31:
../src/rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file
or directory

* daemon/Makefile.am (libvirtd_conf_la_CFLAGS): Add XDR_CFLAGS.
Signed-off-by: NEric Blake <eblake@redhat.com>

Free dst before lxcDomainAttachDeviceDiskLive returns
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

The return value of virDomainControllerFind >=0 means that
the specific controller was found.
But some functions invoke it and treat 0 as not found.
This patch fix these incorrect invocation.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

so "make check" can work for the distributed tarballs too.

Tweak some conditions and use correct typecasts in enums.

Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.

The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.

Sample offending configuration:
  <devices>
  ...
    <rng model='virtio'>
      <backend model='egd' type='unix'>
        <source mode='bind' service='1024'/>
      </backend>
    </rng>
  </devices>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196

- Move COPYING* to libvirt-client, so every package pulls them in
- Move AUTHORS ChangeLog.gz NEWS README TODO from -daemon to -docs
- Drop duplicate distribution of docs in -python

https://bugzilla.redhat.com/show_bug.cgi?id=977099

When passing in custom driver XML, allow a block like

<domain xmlns:test='http://libvirt.org/schemas/domain/test/1.0'>
  ...
  <test:runstate>5</test:runstate>
</domain>

This is only read at initial driver start time, and sets the initial
run state of the object. This is handy for UI testing.

It's only wired up for domains, since that's the only conf/
infrastructure that supports namespaces at the moment.