Introducing a new iolimits element allowing to override certain
properties of a guest block device like the physical and logical
block size.
This can be useful for platforms with 'non-standard' disk formats
like S390 DASD with its 4K block size.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This patch introduces support of setting emulator's period and
quota to limit cpu bandwidth when the vm starts.  Also updates
XML Schema for new entries and docs.

This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

A hypervisor may allow to override the disk geometry of drives.
Qemu, as an example with cyls=,heads=,secs=[,trans=].
This patch extends the domain config to allow the specification of
disk geometry with libvirt.
Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

The following config elements now support a <vlan> subelements:

within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>

Each vlan element must have one or more <tag id='n'/> subelements.  If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.

Some examples:

  <interface type='hostdev'/>
    <vlan>
      <tag id='42'/>
    </vlan>
    <mac address='52:54:00:12:34:56'/>
    ...
  </interface>

  <network>
    <name>vlan-net</name>
    <vlan trunk='yes'>
      <tag id='30'/>
    </vlan>
    <virtualport type='openvswitch'/>
  </network>

  <interface type='network'/>
    <source network='vlan-net'/>
    ...
  </interface>

  <network>
    <name>trunk-vlan</name>
    <vlan>
      <tag id='42'/>
      <tag id='43'/>
    </vlan>
    ...
  </network>

  <network>
    <name>multi</name>
    ...
    <portgroup name='production'/>
      <vlan>
        <tag id='42'/>
      </vlan>
    </portgroup>
    <portgroup name='test'/>
      <vlan>
        <tag id='666'/>
      </vlan>
    </portgroup>
  </network>

  <interface type='network'/>
    <source network='multi' portgroup='test'/>
    ...
  </interface>

IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)

<portgroup> allows a <bandwidth> element, but the schema didn't have
this. Since this makes for multiple elements in portgroup, they must
be interleaved.

<interface type='bridge'> needs to allow <virtualport> elements
for openvswitch, but the schema didn't allow this.

Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.

To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.

Added s390-virtio machine type to the XML schema for domains in order
to not fail the domain schema tests.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Introducing the attribute vendor_id to force the CPUID instruction
in a kvm guest to return the specified vendor.

Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written

Introduce a new syntax for filesystems to allow use of a RAM
filesystem

   <filesystem type='ram'>
      <source usage='10' units='MiB'/>
      <target dir='/mnt'/>
   </filesystem>

The usage units default to KiB to limit consumption of host memory.

* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

qemu 1.1 features a xhci controller,
this patch adds support for it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

'boot' tag shouldn't be exclusive with 'kernel', 'initrd', and 'cmdline',
though the boot sequence doesn't make sense when the guest boots from
kernel directly. But it's useful if booting from kernel is to install
a newguest, even if it's not to install a guest, there is no hurt. And
on the other hand, we allow 'boot' and the kernel tags when parsing.

Allow specifying sound device codecs. See formatdomain.html for
more details.

Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.

This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:

  <numatune>
    <memory placement='auto' mode='interleave'/>
  </numatune>

Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.

If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".

The following XML can now fully drive numad:

1) <vcpu> placement is 'auto', no <numatune> is specified.

   <vcpu placement='auto'>10</vcpu>

2) <vcpu> placement is 'auto', no 'placement' is specified for
   <numatune>.

   <vcpu placement='auto'>10</vcpu>
   <numatune>
     <memory mode='interleave'/>
   </numatune>

And it's also able to control the CPU placement and memory policy
independently. e.g.

1) <vcpu> placement is 'auto', and <numatune> placement is 'static'

   <vcpu placement='auto'>10</vcpu>
   <numatune>
     <memory mode='strict' nodeset='0-10,^7'/>
   </numatune>

2) <vcpu> placement is 'static', and <numatune> placement is 'auto'

   <vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
   <numatune>
     <memory mode='interleave' placement='auto'/>
   </numatume>

A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.

qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).

RHBZ: 819499
Signed-off-by: NAlon Levy <alevy@redhat.com>

Add "usbredir" channel to list of recognized spice channels.

RHBZ: 819498
Signed-off-by: NAlon Levy <alevy@redhat.com>

In order to track a block copy job across libvirtd restarts, we
need to save internal XML that tracks the name of the file
holding the mirror.  Displaying this name in dumpxml might also
be useful to the user, even if we don't yet have a way to (re-)
start a domain with mirroring enabled up front.  This is done
with a new <mirror> sub-element to <disk>, as in:

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/original.img'/>
      <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/>
      ...
    </disk>

For now, the element is output-only, in live domains; it is ignored
when defining a domain or hot-plugging a disk (since those contexts
use VIR_DOMAIN_XML_INACTIVE in parsing).  The 'ready' attribute appears
when libvirt knows that the job has changed from the initial pulling
phase over to the mirroring phase, although absence of the attribute
is not a sure indicator of the current phase.  If we come up with a way
to make qemu start with mirroring enabled, we can relax the xml
restriction, and allow <mirror> (but not attribute 'ready') on input.
Testing active-only XML meant tweaking the testsuite slightly, but it
was worth it.

* docs/schemas/domaincommon.rng (diskspec): Add diskMirror.
* docs/formatdomain.html.in (elementsDisks): Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): New members.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean them.
(virDomainDiskDefParseXML): Parse them, but only internally.
(virDomainDiskDefFormat): Output them.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise.
* tests/qemuxml2xmltest.c (testInfo): Alter members.
(testCompareXMLToXMLHelper): Allow more test control.
(mymain): Run new test.

<filesystemtgt> is redundant, as every group uses it; <address>
shouldn't be in <filesystemtgt> in case of the meaning could be
"filesystemtarget"; The elements <address>, <alias>, <target>,
... should be interleaved.

Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.

Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.

Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.

Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

* docs/schemas/domaincommon.rng: Add missing lxc & openvz
  console target types. Allow arch on LXC <os> type element
* tests/domainschematest: Include tests/lxcxml2xmldata/

Pass argv to the init binary of LXC, using a new <initarg> element.

* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
  tests/lxcxml2xmltest.c, tests/testutilslxc.c,
  tests/testutilslxc.h: Test parsing/formatting of LXC related
  XML parts

Example XML:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <source file='/tmp/cdrom.img'/>
      <target dev='hdd' bus='ide' tray='open'/>
    </disk>

A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:

1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.

There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).

The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.

If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.

This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
  for <privnet/> feature. Auto-set <privnet> if any <interface>
  devices are defined
* src/lxc/lxc_container.c: Honour request for private network
  namespace

numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.

More details: http://fedoraproject.org/wiki/Features/numad

"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.

This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.

  <vcpu placement="auto">4</vcpu>
  <vcpu placement="static" cpuset="1-10^6">4</vcpu>

The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
  <vcpu placement="auto" cpuset="1-10^6">4</vcpu>

If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
  numad -w $num_of_vcpus:$current_memory_amount / 1024

The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).

If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.

Only QEMU/KVM drivers support it now.

See docs update in patch for more details.

spice agent-mouse support

Usage:
  <graphics type='spice'>
    <mouse mode='client'|'server'/>
  <graphics/>
Signed-off-by: NOsier Yang <jyang@redhat.com>

Output is still in kibibytes, but input can now be in different
scales for ease of typing.

* src/conf/domain_conf.c (virDomainParseMemory): New helper.
(virDomainDefParseXML): Use it when parsing.
* docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement
to memoryElement and update callers.
* docs/formatdomain.html.in (elementsMemoryAllocation): Document
scaling.
* tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.

The test domain allows <memory>0</memory>, but the RNG was stating
that memory had to be at least 4096000 bytes.  Hypervisors should
enforce their own limits, rather than complicating the RNG.

Meanwhile, some copy and paste had introduced some fishy constructs
in various unit tests.

* docs/schemas/domaincommon.rng (memoryKB, memoryKBElement): Drop
limit that isn't enforced in code.
* src/conf/domain_conf.c (virDomainDefParseXML): Require current
<= maximum.
* tests/qemuxml2argvdata/*.xml: Fix offenders.

Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.

This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:

  <interface type='hostdev' managed='yes'>
    <source>
      <address type='pci' domain='0' bus='0' slot='4' function='3'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
    <address type='pci' domain='0' bus='0' slot='7' function='0'/>
  </interface>

This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.

NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.

Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:

  <interface type='hostdev'>
    <source>
      <address type='usb' bus='0' device='4'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

If the vendor/product form of usb specification is used, type='usb'
is implied:

  <interface type='hostdev'>
    <source>
      <vendor id='0x0012'/>
      <product id='0x24dd'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).

* src/conf/domain_conf.h: Add new member "target" to struct
  _virDomainDeviceDriveAddress.

* src/conf/domain_conf.c: Parse and format "target"

* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
  tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
  tests/vmx2xmldata/ are modified for newly introduced
  attribute "target" for address of "drive" type.

Adding a new model for virtio-scsi roughly follows the same scheme
as the previous patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM will be able to use a PCI SCSI controller even on POWER.  Let
the user specify the vSCSI controller by other means than a default.

After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NOsier Yang <jyang@redhat.com>

This reverts commit 7b345b69.

Conflicts:

	tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-vscsi.xml

This reverts commit c9abfadf.

Conflicts:

	tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-virtio-scsi.xml