- 09 11月, 2010 7 次提交
-
-
由 Daniel P. Berrange 提交于
This supports the '-vga qxl' parameter in upstream QEMU/KVM which has SPICE support added. This isn't particularly useful until you get the next patch for -spice support. Also note that while the libvirt XML supports multiple video devices, this patch only supports a single one. A later patch can add support for 2nd, 3rd, etc PCI devices for QXL * src/qemu/qemu_conf.h: Flag for QXL support * src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it * tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test case for generating spice args with RHEL6 kvm
-
由 Daniel P. Berrange 提交于
This adds an element <graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/> This is the bare minimum that should be exposed in the guest config for SPICE. Other parameters are better handled as per host level configuration tunables * docs/schemas/domain.rng: Define the SPICE <graphics> schema * src/domain_conf.h, src/domain_conf.c: Add parsing and formatting for SPICE graphics config * src/qemu_conf.c: Complain about unsupported graphics types
-
由 Daniel P. Berrange 提交于
* src/qemu_conf.c: Add dummy entry in enumeration * docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag * src/domain_conf.c, src/domain_conf.h: Add QXL to video type enumerations
-
由 Jiri Denemark 提交于
-
由 Matthias Bolte 提交于
Suggested by danpb, as it's not up-to-date anymore and lacks many functions that were added to libvirtd.
-
由 Matthias Bolte 提交于
There is no point in trying to fill params beyond the first error, because when lxcDomainGetMemoryParameters returns -1 then the caller cannot detect which values in params are valid.
-
由 Matthias Bolte 提交于
Also fix a typo in the documentation of the function.
-
- 08 11月, 2010 5 次提交
-
-
由 Daniel Veillard 提交于
The patch is based on the possiblity in the QEmu command line to add -smbios options allowing to override the default values picked by QEmu. We need to detect this first from QEmu help output. If the domain is defined with smbios to be inherited from host then we pass the values coming from the Host own SMBIOS, but if the domain is defined with smbios to come from sysinfo, we use the ones coming from the domain definition. * src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum value * src/qemu/qemu_conf.c: scan the help output for the smbios support, and if available add support based on the domain definitions, and host data * tests/qemuhelptest.c: add the new enum in the outputs
-
由 Daniel Veillard 提交于
Read and store the data when initializing the driver.
-
由 Daniel Veillard 提交于
Move existing routines about virSysinfoDef to an util module, add a new entry point virSysinfoRead() to read the host values with dmidecode * src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c src/util/sysinfo.h: move to a new module, add virSysinfoRead() * src/Makefile.am: handle the new module build * src/libvirt_private.syms: new internal symbols * include/libvirt/virterror.h src/util/virterror.c: defined a new error code for that module * po/POTFILES.in: add new file for translations
-
由 Daniel Veillard 提交于
the element has a mode attribute allowing only 3 values: - emulate: use the smbios emulation from the hypervisor - host: try to use the smbios values from the node - sysinfo: grab the values from the <sysinfo> fields * docs/schemas/domain.rng: extend the schemas * src/conf/domain_conf.h: add the flag to the domain config * src/conf/domain_conf.h: parse and serialize the smbios if present
-
由 Daniel Veillard 提交于
* src/conf/domain_conf.h: defines a new internal type added to the domain structure * src/conf/domain_conf.c: parsing and serialization of that new type
-
- 06 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 03 11月, 2010 4 次提交
-
-
由 Stefan Berger 提交于
During a shutdown/restart cycle libvirtd forgot the macvtap device name that it had created on behalf of a VM so that a stale macvtap device remained on the host when the VM terminated. Libvirtd has to actively tear down a macvtap device and it uses its name for identifying which device to tear down. The solution is to not blank out the <target dev='...'/> completely, but only blank it out on VMs that are not active. So, if a VM is active, the device name makes it into the XML and is also being parsed. If a VM is not active, the device name is discarded.
-
由 Daniel Veillard 提交于
virPipeReadUntilEOF is used to read the stdout of exec'ed and this could fail to capture the full output and read only 1024 bytes. The problem is that this is based on a poll loop, and in the loop we read at most 1024 bytes per file descriptor, but we also note in the loop if poll indicates that the process won't output more than that on that fd by setting finished[i] = 1. The simplest way is that if we read a full buffer make sure finished[i] is still 0 because we will need another pass in the loop.
-
由 Eric Blake 提交于
* src/util/virterror.c (virErrorDomainName): Always supply trailing space if category was present.
-
由 Eric Blake 提交于
* src/xen/xen_driver.h (includes): Include main xen headers here... * src/xen/xs_internal.c (includes): ...rather than in just one of the sub-drivers.
-
- 02 11月, 2010 9 次提交
-
-
由 Daniel P. Berrange 提交于
The remoteIO() method has wierd calling conventions, where it is passed a pre-allocated 'struct remote_call *' but then free()s it itself, instead of letting the caller free(). This fixes those weird semantics * src/remote/remote_driver.c: Sanitize semantics of remoteIO method wrt to memory release
-
由 Daniel P. Berrange 提交于
A couple of places in the text monitor were overwriting the 'ret' variable with a >= 0 value before success was actually determined. So later error paths would not correctly return the -1 value. The drive_add code was not checking for errors like missing command * src/qemu/qemu_monitor_text.c: Misc error handling fixes
-
由 Daniel P. Berrange 提交于
NFS in root squash mode may prevent opening disk images to determine backing store. Ignore errors in this scenario. * src/security/security_selinux.c: Ignore open failures on disk images
-
由 Daniel P. Berrange 提交于
NFS does not support file labelling, so ignore this error for stdin_path when on NFS. * src/security/security_selinux.c: Ignore failures on labelling stdin_path on NFS * src/util/storage_file.c, src/util/storage_file.h: Refine virStorageFileIsSharedFS() to allow it to check for a specific FS type.
-
由 Daniel P. Berrange 提交于
Commit 06f81c63 attempted to make QEMU driver ignore the failure to relabel 'stdin_path' if it was on NFS. The actual result was that it ignores *all* failures to label any aspect of the VM, unless stdin_path is non-NULL and is not on NFS. * src/qemu/qemu_driver.c: Treat all relabel failures as terminal
-
由 Jiri Denemark 提交于
They only popped up during --disable-nls build. Without this configure option, gcc wasn't able to detect them.
-
由 Osier Yang 提交于
* src/util/util.h * src/util/util.c * src/libvirt_private.syms
-
由 Eric Blake 提交于
* src/xen/xend_internal.c (xenDaemonFormatSxpr): Hoist verify outside of function to avoid a -Wnested-externs warning. * src/xen/xm_internal.c (xenXMDomainConfigFormat): Likewise. Reported by Daniel P. Berrange.
-
由 Diego Elio Pettenò 提交于
Make sure that the QEmu process within the cgroup can access the device file for the USB device that has to be connected to the virtual domain.
-
- 01 11月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/xen/xen_hypervisor.c (MAX_VIRT_CPUS): Move... * src/xen/xen_driver.h (MAX_VIRT_CPUS): ...so all xen code can see same value. * src/xen/xend_internal.c (sexpr_to_xend_domain_info) (xenDaemonDomainGetVcpusFlags, xenDaemonParseSxpr) (xenDaemonFormatSxpr): Work if MAX_VIRT_CPUS is 64 on a platform where long is 64-bits. * src/xen/xm_internal.c (xenXMDomainConfigParse) (xenXMDomainConfigFormat): Likewise.
-
- 30 10月, 2010 2 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
-
由 KAMEZAWA Hiroyuki 提交于
Add dump_image_format[] to qemu.conf and support compressed dump at virsh dump. coredump compression is important for saving disk space in an environment where multiple guests run. In general, "disk space for dump" is specially allocated and will be a dead space in the system. It's used only at emergency. So, it's better to have both of save_image_format and dump_image_format. "save" is done in scheduled manner with enough calculated disk space for it. This code reuses some of save_image_format[] and supports the same format. Changelog: - modified libvirtd_qemu.aug - modified test_libvirtd_qemu.aug - fixed error handling of qemudSaveCompressionTypeFromString()
-
- 29 10月, 2010 4 次提交
-
-
由 Lai Jiangshan 提交于
When we mount any cgroup without "-o devices", we will fail to start vms: error: Failed to start domain vm1 error: Unable to deny all devices for vm1: No such file or directory When we mount any cgroup without "-o cpu", we will fail to get schedinfo: Scheduler : posix error: unable to get cpu shares tunable: No such file or directory We should only use the cgroup controllers which are mounted on host. So I add virCgroupMounted() for qemuCgroupControllerActive() Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
-
由 Matthias Bolte 提交于
This is actually a workaround, to unbreak make check on systems without VirtualBox.
-
由 Matthias Bolte 提交于
This partly reverts df90ca76. Don't disable the VirtualBox driver when configure can't find VBoxXPCOMC.so, rely on detection at runtime again instead. Keep --with-vbox=/path/to/virtualbox intact, added to for: https://bugzilla.redhat.com/show_bug.cgi?id=609185 Detection order for VBoxXPCOMC.so: 1. VBOX_APP_HOME environment variable 2. configure provided location 3. hardcoded list of known locations 4. dynamic linker search path Also cleanup the glue code and improve error reporting.
-
由 KAMEZAWA Hiroyuki 提交于
fix warning CC libvirt_util_la-virtaudit.lo cc1: warnings being treated as errors util/virtaudit.c: In function 'virAuditEncode': util/virtaudit.c:146: error: implicit declaration of function 'virAsprintf' [-Wimplicit-function-declaration] util/virtaudit.c:146: error: nested extern declaration of 'virAsprintf' [-Wnested-externs]
-
- 28 10月, 2010 7 次提交
-
-
由 Stefan Berger 提交于
The 2nd and 3rd hunk show the only double-closed file descriptor code part that I found while trying to clean up close(). The first hunk seems a harmless cleanup in that same file.
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=638285 - when migrating a guest, it was very easy to provoke a race where an application could query block information on a VM that had just been migrated away. Any time qemu code obtains a job lock, it must also check that the VM was not taken down in the time where it was waiting for the lock. * src/qemu/qemu_driver.c (qemudDomainSetMemory) (qemudDomainGetInfo, qemuDomainGetBlockInfo): Check that vm still exists after obtaining job lock, before starting monitor action.
-
由 Laine Stump 提交于
During virtual network startup, the iptables rule that allows tftp traffic is only added if network->def->tftproot is non-empty, but when the virtual network is destroyed, we had been unconditionally trying to delete the rule. This was harmless, except that it created a bogus error message. This patch conditionalizes the delete command in the same manner that the insert command is already conditionalized.
-
由 Matthias Bolte 提交于
Commit 9bd3cce0 added virFork and virDriverLoadModule to libvirt_private.syms, but virFork didn't have a body on Win32 and virDriverLoadModule was already correctly exported conditional via libvirt_driver_modules.syms.
-
由 Daniel P. Berrange 提交于
Add auditing of all initial disk/net assignments to QEMU guests at startup. Add auditing for all hotplug & unplug events and disk media changes. * src/qemu/qemu_driver.c: Add disk/net resource auditing
-
由 Daniel P. Berrange 提交于
Add auditing of the allocated security label in the QEMU driver VM startup code * src/qemu/qemu_driver.c: Audit security label
-
由 Daniel P. Berrange 提交于
Add audit hooks to report all start and stop events on QEMU guest domains. * src/qemu/qemu_driver.c: Audit start/stop events
-