VIR_ERR_NO_CONNECT already contains "no connection driver available".

This patch changes:
no connection driver available for No connection for URI hello
to:
no connection driver available for hello

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=851413

Currently we call virSetDeviceUnprivSGIO with val == 0 if a block device
has an sgio attribute.  But for sgio='filtered', we know that a
kernel with no unpriv_sgio support will always behave as the user
wanted.  In this case, there is no need to call the function and
report a (bogus) error.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

testutils.c likes to print summaries after a test completes,
including if it failed.  But if the test outright exit()s,
this summary is skipped.  Enforce that we return instead of exit.

* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.

Now that the segfault is solved, we can skip instead of fail
the test when yajl is not present.

* tests/qemumonitorjsontest.c (mymain): Skip if no yajl.

On a machine without yajl headers, I was seeing random segfaults
from qemumonitorjsontest (about 90% of the runs on my particular
machine).  The segfault was inside virClassIsDerivedFrom, which
points to a case of a race leading to unreferencing a stale
pointer to an object that had already been freed.  I also noticed
that if I got the segfault, I was seeing messages such as:

2013-02-22 16:12:37.504+0000: 19833: error : virNetSocketWriteWire:1361 : Cannot write data: Bad file descriptor

which is also evidence of deferencing a stale pointer.  I traced it
to a race where qemuMonitorTestIO could execute late, after the
main thread had already called qemuMonitorTestFree and called
virNetSocketClose(test->client) but not clearing it out to NULL.
Sure enough, after test->client has been closed, fd is -1, which
causes an attempt to write to the socket to fail, which in turn
triggers the error code of qemuMonitorTestIO that tries to re-close
test->client.

* tests/qemumonitortestutils.c (qemuMonitorTestIO): Don't attempt
to free client again if test already quit.

If virCondInit fails (okay, so that's unlikely), then we end up
attempting a virObjectUnlock() on the cleanup path, even though
we don't hold a lock.  This is not guaranteed to be safe.  While
at it, I noticed a couple places where we were referencing mon->fd
outside locks.

* src/qemu/qemu_monitor.c (qemuMonitorOpenInternal): Minimize lock
duration.  mon->watch doesn't need clean up on error.
(qemuMonitorGetBlockExtent, qemuMonitorBlockResize): Don't
dereference fd outside of lock.

I built without yajl support, and noticed a strange failure message
in qemumonitorjsontest:

2013-02-22 16:12:37.503+0000: 19812: error : virJSONValueToString:1119 : internal error No JSON parser implementation is available
2013-02-22 16:12:37.503+0000: 19812: error : qemuMonitorJSONCommandWithFd:253 : out of memory

While a later patch will fix the test to skip when json is not present,
this patch avoids overriding the more useful error message from
virJSONValueToString returning NULL.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCommandWithFd):
Don't override message.
(qemuMonitorJSONCheckError): Don't print NULL.
* src/qemu/qemu_agent.c (qemuAgentCommand): Don't override message.
(qemuAgentCheckError): Don't print NULL.
(qemuAgentArbitraryCommand): Properly fail on OOM.

The new TypedParam helper APIs allow to simplify this function
significantly.

This patch integrates the fix in 75e5bec9
by correctly ordering the setting functions instead of reordering the
parameters.

The bridge device was showing the vnet devices created for the domains
as connected to the bridge. libvirt should only show host devices when
trying to get the interface definition rather than the domain devices as
well.

uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.

Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.

Explicitly cast them to unsigned int for printing.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

The uid_t|gid_t values are explicitly casted to "unsigned long", but the
printf() still used "%d", which is for signed values.

Change the format to "%u".
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Adds XML parsing and qemu commandline tests for the VirtIO RNG device
support.

This patch adds a new capability bit QEMU_CAPS_OBJECT_RNG_EGD and code
to support the egd backend for the VirtIO RNG device.

The device is added by 3 qemu command line options:
-chardev socket,id=charrng0,host=1.2.3.4,port=1234 (communication
                                                    backend)
-object rng-egd,chardev=charrng0,id=rng0 (RNG protocol client)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (the RNG device)

This patch implements support for the virtio-rng-pci device and the
rng-random backend in qemu.

Two capabilities bits are added to track support for those:

QEMU_CAPS_DEVICE_VIRTIO_RNG - for the device support and
QEMU_CAPS_OBJECT_RNG_RANDOM - for the backend support.

qemu is invoked with these additional parameters if the device is
enabled:

-object rng-random,id=rng0,filename=/test/phile (to add the backend)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (to add the device)

This patch adds basic configuration support for the RNG device
supporting the virtio model with the "random" and "egd" backend types as
described in the schema in the previous patch.

This patch documents XML elements used for (basic) support of virtual
RNG devices.

In the devices section in the domain XML users may specify:

For the default 'random' backend:
  <devices>
    <rng model='virtio'>
      <backend model='random'>/dev/urandom</backend>
    </rng>
  </devices>

For the slightly more advanced EGD backend:
  <devices>
    <rng model='virtio'>
      <backend model='egd' type='udp'>
        <!-- this is a definition of a character device -->
        <source mode='bind' service='1234'/>
        <source mode='connect' host='1.2.3.4' service='1234'/>
        <!-- or other valid character device configuration -->
      </backend>
    </rng>
  </devices>

For the planned random daemon/pool:
  <devices>
    <rng model='virtio'>
      <backend model='pool' pool='poolname'>class</backend>
    </rng>
  </devices>

to enable the RNG device for guests.

This patch adds a fake switch statement to force the compiler to warn
after a new device type was added. This should remind the contributor to
add the new device also to this iterator function.

Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.
Signed-off-by: NGene Czarcinski <gene@czarc.net>
Signed-off-by: NLaine Stump <laine@laine.org>

Although in IPv4 one must pick either mac or name, either
can be omitted.  Similarly, for IPv6, the name
can be optionally omitted.
Signed-off-by: NGene Czarcinski <gene@czarc.net>
Signed-off-by: NLaine Stump <laine@laine.org>

For really old qemu-img binaries which do not support specifying
the format of the backing file, display a DEBUG message instead of
INFO that this can't be done.

Modify the expected output of storagevolxml2argv tests as well.

This allows us to create a test for the generated command line.

It makes no sense to prohibit reuse of the wrapper in other LGPL
projects, since most of libvirt is designed to be LGPL.  Of
course, when using the wrapper to wrap a GPL program, the combined
result is still effectively GPL, but that shouldn't force us to
license the wrapper as GPL in isolation.

* run.in: Relicense to LGPLv2+.

If a migration fails, we need to stop all block jobs running so
qemu doesn't try to send data to destination over and over again.

At the end of migration, it is important to stop NBD
server and thus release all allocated resources.

This function does the source part of NBD magic. It
invokes drive-mirror on each non shared and RW disk with
a source and wait till the mirroring process completes.
When it does we can proceed with migration.

Currently, an active waiting is done: every 500ms libvirt
asks qemu if block-job is finished or not.  However, once
the job finishes, qemu doesn't report its progress so we
can only assume if the job finished successfully or not.
The better solution would be to listen to the event which
is sent as soon as the job finishes. The event does
contain the result of job.

We need to start NBD server and feed it with all non-<shared/>,
RW and source-full disks. Moreover, with new virPortAllocator we
must ensure the borrowed port for NBD server will be returned if
either migration completes or qemu process is torn down.

This will be used after all migration work is done
to stop NBD server running on destination.  It
doesn't take any arguments, just issues a command.

This will be used with new migration scheme.
This patch creates basically just monitor stub
functions. Wiring them into something useful
is done in later patches.

This will be used with new migration scheme.
This patch creates basically just monitor stub
functions. Wiring them into something useful
is done in later patches.

This migration cookie is meant for two purposes. The first is to be sent
in begin phase from source to destination to let it know we support new
implementation of VIR_MIGRATE_NON_SHARED_{DISK,INC} so destination can
start NBD server. Then, the second purpose is, destination can let us
know, on which port the NBD server is running.

This just keeps track whether qemu knows nbd-server-* commands
so we can use it during migration or not.

This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.

Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: NPieter Hollants <pieter@hollants.com>
Signed-off-by: NLaine Stump <laine@laine.org>

Nothing in run required bash, except for the shebang.  On systems
where /bin/bash doesn't exist (I hit it on FreeBSD), using /bin/sh
instead fixes a 'make check' failure:
gmake[3]: Entering directory `/usr/home/dummy/libvirt/python'
  GEN    check-local
/usr/local/bin/bash: ../run: /bin/bash: bad interpreter: No such file or directory

* run.in: Use /bin/sh, not bash.