That sets a new flag, but that flag does mean the child will get
LISTEN_FDS and LISTEN_PID environment variables properly set and
passed FDs reordered so that it corresponds with LISTEN_FDS (they must
start right after STDERR_FILENO).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since not only systemd can do this (we'll be doing it as well few
patches later), change 'systemd' to 'caller' and fix LISTEN_FDS to
LISTEN_PID where applicable.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1072653

Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.

This internal API just checks if two bitmaps intersect or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This should iterate over mount tab and search for hugetlbfs among with
looking for the default value of huge pages.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Leak introduced in commit 16ebf10f (v1.2.6), detected by valgrind:

==9816== 216 (96 direct, 120 indirect) bytes in 6 blocks are definitely lost in loss record 665 of 821
==9816==    at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816==    by 0x50836FB: virAlloc (viralloc.c:144)
==9816==    by 0x1DBDBE27: udevProcessPCI (node_device_udev.c:546)
==9816==    by 0x1DBDD79D: udevGetDeviceDetails (node_device_udev.c:1293)

* src/util/virpci.h (virPCIEDeviceInfoFree): New prototype.
* src/util/virpci.c (virPCIEDeviceInfoFree): New function.
* src/conf/node_device_conf.c (virNodeDevCapsDefFree): Clear
pci_express under pci case.
(virNodeDevCapPCIDevParseXML): Avoid leak.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
* src/libvirt_private.syms (virpci.h): Export it.
Signed-off-by: NEric Blake <eblake@redhat.com>

virTimeFieldsThenRaw will never return negative result, so I clean up
the related meaningless judgements to make it better.
Signed-off-by: NJames <james.wangyufei@huawei.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

Replace all three-state (default/yes/no) enums with it:
virDomainBIOSUseserial
virDomainBootMenu
virDomainPMState
virDomainGraphicsSpiceClipboardCopypaste
virDomainGraphicsSpiceAgentFileTransfer
virNetworkDNSForwardPlainNames

Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.

Introduce a new function to parse the provided scsi_host parent address
and unique_id value in order to find the /sys/class/scsi_host directory
which will allow a stable SCSI host address

Add a test to scsihosttest to lookup the host# name by using the PCI address
and unique_id value

Introduce a new function to read the current scsi_host entry and return
the value found in the 'unique_id' file.

Add a 'scsihosttest' test (similar to the fchosttest, but incorporating some
of the concepts of the mocked pci test library) in order to read the
unique_id file like would be found in the /sys/class/scsi_host tree.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways.  On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).

In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:

s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g

then shrunk long lines, and mainly functions, that were created after
that:

sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'

And to cope with the enum name, I haad to change the constants as
well:

s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g

Last thing I did was at least a little shortening of already long
name:

s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.

Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.

Add security driver functions to label separate storage images using the
virStorageSource definition. This will help to avoid the need to do ugly
changes to the disk struct and use the source directly.

Add helper APIs to manage individual image files rather than disks. To
simplify the addition some parts of the code were refactored in this
patch.

Cgroups code uses VIR_CGROUP_DEVICE_* flags to specify the mode but in
the end it needs to be converted to a string. Add a helper to do it and
use it in the cgroup code before introducing it into the rest of the
code.

We are going to modify storage source chains in place. Add a helper that
will copy relevant information such as security labels to the new
element if that doesn't contain it.

Now that we have pointers to store disk source information and thus can
easily exchange the structs behind we need a function to copy all the
data.

The qemu block info function relied on working with local storage. Break
this assumption by adding support for remote volumes. Unfortunately we
still need to take a hybrid approach as some of the operations require a
filedescriptor.

Previously you'd get:
 $ virsh domblkinfo gl vda
 error: cannot stat file '/img10': Bad file descriptor

Now you get some stats:
 $ virsh domblkinfo gl vda
 Capacity:       10485760
 Allocation:     197120
 Physical:       197120

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110198

Add startup auditing and also hotplug auditing for said devices.

There's a lot of places where we skip doing actions based on the
locality of given storage type. The usual pattern is to skip it if:

virStorageSourceGetActualType(src) == VIR_STORAGE_TYPE_NETWORK

Add a simple helper to simplify the pattern to
virStorageSourceIsLocalStorage(src)

Replace the inline "auth" struct in virStorageSource with a pointer
to a virStorageAuthDefPtr and utilize between the domain_conf, qemu_conf,
and qemu_command sources for finding the auth data for a domain disk

Introduce virStorageAuthDef and friends.  Future patches will merge/utilize
their view of storage source/pool auth/secret definitions.

New API's include:
    virStorageAuthDefParse:  Parse the "<auth/>" XML data for either the
                             domain disk or storage pool returning a
                             virStorageAuthDefPtr
    virStorageAuthDefCopy:   Copy a virStorageAuthDefPtr - to be used by
                             the qemuTranslateDiskSourcePoolAuth when it
                             copies storage pool auth data into domain
                             disk auth data
    virStorageAuthDefFormat: Common output of the "<auth" in the domain
                             disk or storage pool XML
    virStorageAuthDefFree:   Free memory associated with virStorageAuthDef

Subsequent patches will utilize the new functions for the domain disk and
storage pools.

Future work in the hostdev pass through can then make use of common data
structures and code.

So far only information on disks and host devices are exposed in the
capabilities XML. Well, at least something. Even a new test is
introduced. The qemu capabilities are stolen from already existing
qemucapabilities test. There's one tricky point though. Functions that
checks host's KVM and VFIO capabilities, are impossible to mock
currently. So in the test, we are setting the capabilities by hand.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This new module holds and formats capabilities for emulator. If you
are about to create a new domain, you may want to know what is the
host or hypervisor capable of. To make sure we don't regress on the
XML, the formatting is not something left for each driver to
implement, rather there's general format function.

The domain capabilities is a lockable object (even though the locking
is not necessary yet) which uses reference counter.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Check if the buffer is in error state and report an error if it is.

This replaces the pattern:
if (virBufferError(buf)) {
    virReportOOMError();
    goto cleanup;
}
with:

if (virBufferCheckError(buf) < 0)
    goto cleanup;

Document typical buffer usage to favor this.
Also remove the redundant FreeAndReset - if an error has
been set via virBufferSetError, the content is already freed.

Just like virFileReadAll, but returns -errno instead
of reporting errors. Useful for ignoring some errors.

I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.

Rename them to comply with the naming policy.

This patch introduces a function that will allow us to resolve a
relative difference between two elements of a disk backing chain. This
function will be used to allow relative block commit and block pull
where we need to specify the new relative name of the image to qemu.

This patch also adds unit tests for the function to verify that it works
correctly.

virPortAllocatorSetUsed permits to set a port as already used and
prevent the port allocator to use it without any attempt to bind it.
Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Introduce a common function that will take a callback to resolve links
that will be used to canonicalize paths on various storage systems and
add extensive tests.

To free string lists with some strings stolen from the middle we need to
walk the complete array. Introduce a new helper that takes the string
list size to free such string lists.

Just code movement and rename.

I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.

The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.