Introduce a macro to assign the parameters to avoid the for loop and
shuffle around various checks for a simpler and saner function.

Use virDomainObjGetDefs since the API guarantees that both live and
config are never set together.

The caller is already aware that the params are missing and the
extractor is ignoring the missing ones so the parameter isn't necessary.

ESX will refuse to attach VMDKS that have buslogic adatper type to 64bit
VMs whereas lsilogic works fine both 32bit and 64bit VMs.

Xen only supports network-based disks with the qemu (aka qdisk) driver.
Set the driverName to 'qemu' in libxlDomainDeviceDefPostParse() if
not already set. When starting a domain with network-based disks,
ensure the driverName is 'qemu'.

Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=981094

The libvirt internal bits can be changed for disks that don't otherwise
support changing media. Remove the switch statement and allow changes of
non-source data for all disks.

qemuDomainChangeDiskLive rolled back few changes to the disk definition
if changing of the media failed. This can be avoided by moving some code
around.

Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

Commit id '15ccb0db' added job functions for the lxc driver; however,
for shutdown and nonpersistent path, the vm was removed from the domain
object list and the vm pointer cleared before the endjob.

Adjust the code to perform the endjob first and then perform the
ObjListRemove as long as the vm wasn't NULL. This follows more closely
models from qemu and libxl

Found by Coverity (FORWARD_NULL)

Based on some digital archaeology performed by jtomko, it's been determined
that the persistentAddrs variable is no longer necessary...

The variable was added by:
commit 141dea6b
CommitDate: 2010-02-12 17:25:52 +0000
    Add persistence of PCI addresses to QEMU

Where it was set to 0 on domain startup if qemu did not support the
QEMUD_CMD_FLAG_DEVICE capability, to clear the addresses at shutdown,
because QEMU might make up different ones next time.

As of commit f5dd58a6
CommitDate: 2012-07-11 11:19:05 +0200
    qemu: Extended qemuDomainAssignAddresses to be callable from
    everywhere.

this was broken, when the persistentAddrs = 0 assignment was moved
inside qemuDomainAssignPCIAddresses and while it pretends to check
for !QEMU_CAPS_DEVICE, its parent qemuDomainAssignAddresses is only
called if QEMU_CAPS_DEVICE is present.

Since commit id '20a0fa8e' removed the QEMU_CAPS_DEVICE, Coverity notes
that it's no longer possible to have 'addrs' be NULL when checking for
a live domain since qemuDomainPCIAddressSetCreate would have jumped to
cleanup if addrs was NULL.

Instead of setting the flag before parsing the PCI address, set
it afterwards. This ensure we can never end up in a situation
where the flag has been set but pci_dev.physical_function has
not been filled in.

Commit c8b1a836 changed the function, making it
impossible for callers to be able to tell whether a
non-negative return value means "physical function
address found and parsed correctly" or "couldn't find
corresponding physical function".

The important difference between the two being that,
in the latter case, the returned pointer is NULL and
should never, ever be dereferenced.

In order to cope with these changes, the callers
have to be updated.

Just an extra precaution in case the function returns early
due to an OOM error.

Use the detected tray presence flag to trigger the tray waiting code
only if the given storage device in qemu reports to have a tray.

This is necessary as the floppy device lost it's tray as of qemu commit:

commit abb3e55b5b718d6392441f56ba0729a62105ac56
Author: Max Reitz <mreitz@redhat.com>
Date:   Fri Jan 29 20:49:12 2016 +0100

    Revert "hw/block/fdc: Implement tray status"

Commit 1fad65d4 used a really big hammer
and overwrote the error message that might be reported by qemu if the
tray is locked. Fix it by reporting the error only if no error is
currently set.

Error after commit mentioned above:
error: internal error: timed out waiting for disk tray status update

New error:
error: internal error: unable to execute QEMU command 'eject': Tray of
device 'drive-ide0-0-0' is not open

The code grew rather convoluted. Extract it to a separate function.

Extract information for all disks and update tray state and source only
for removable drives. Additionally store whether a drive is removable
and whether it has a tray.

Move it to a more sane place since it's refreshing data about disks.

Extract whether a given drive has a tray and whether there is no image
inserted.

Negative logic for the image insertion is chosen so that the flag is set
only if we are certain of the fact.

When reviewing libxl vif typename series[0] I found a bug
on xen-xm formatter where "virsh domxml-to-native xen-xm file.xml"
can lead to a NULL dereference if the disk driver isn't specified.
Fix this by checking for driver before writing/testing it down.

[0] https://www.redhat.com/archives/libvir-list/2016-April/msg01434.htmlSigned-off-by: NJoao Martins <joao.m.martins@oracle.com>

This is identical to type='bridge', but without the "connect to a
bridge" part, so it can be handled by using the same functions (and
often even the same cases in switch statements), after renaming
virLXCProcessSetupInterfaceBridged() to virLXCProcessInterfaceTap()
and enhancing it to skip bridge-related items when brname == NULL.

To be truly useful, we need to support setting the ip address on the
host side veth as well as guest side veth (already supported for
type='bridge'), as well as setting the peer address for both.

The <script> element (supported by type='ethernet' in qemu) isn't
supported in this patch. An error is logged at domain start time if it
is encountered. This may be changed in a later patch.

This patch follows the pattern used in qemu driver regarding
reference counting.
It changes lxcDomObjFromDomain() to ref the domain (using
virDomainObjListFindByUUIDRef()) and adds virDomainObjEndAPI() which
should be the only function in which the return value of
virObjectUnref() is checked.  This makes all reference counting
deterministic and makes the code a bit clearer.
Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>

Use the recently added job functions in lxcDomainLxcOpenNamespace,
lxcDomainSendProcessSignal.
Signed-off-by: NKaterina Koukiou <k.koukiou@gmail.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Below is backtraces of two deadlocked threads:

thread #1:
 virDomainConfVMNWFilterTeardown
   virNWFilterTeardownFilter
       lock updateMutex <------------
       _virNWFilterTeardownFilter
            try to lock interface <----------

thread #2:
 learnIPAddressThread
    lock interface <-------
    virNWFilterInstantiateFilterLate
        try to lock updateMutex <----------

The problem is fixed by unlocking interface before calling
virNWFilterInstantiateFilterLate to avoid updateMutex and interface ordering
deadlocks. Otherwise we are going to instantiate the filter while holding
interface lock, which will try to lock updateMutex, and if some other thread
instantiating a filter in parallel is holding updateMutex and is trying to
lock interface, both will deadlock.
Also it is safe to unlock interface before virNWFilterInstantiateFilterLate
because learnIPAddressThread stopped capturing packets and applied necessary
rules on the interface, while instantiating a new filter doesn't require a
locked interface.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Fix the regex for excluding files for this syntax-rule.  The rule "include/"
will not work, because we are matching the whole line like this
"^(...|include/|...)$ so we need to use "include/libvirt/libvirt.+".  The second
issue is that we are using only one '$' but there should be two of those at the
end.  The last small adjustment is to escape dots '.' so it match only dot.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We need to append GNUTLS_CFLAGS while building utils because virtcrypto
is using it.  This fixes build on freebsd where gnutuls is in
/usr/local/include.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Test disk-drive-network-rbd-auth-AES depends on existence of
gnutls_cipher_encrypt() function which was introduced in gnutls 2.10.0.
On systems without this function we should skip this test.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>