When finding a sparse NUMA topology, libnuma will return ENOENT
the first time it is invoked. On subsequent invocations it
will return success, but with an all-1's CPU mask. Check for
this, to avoid polluting the capabilities XML with 4096 bogus
CPUs

* src/nodeinfo.c: Check for all-1s CPU mask

Enabling debug doesn't show the capabilities XML for a connection.
Add an extra debug statement for the return value

* src/libvirt.c: Enable debug logging of capabilities XML

When failing to serialize the normal RPC reply, try harder to
send a error message back to the client, instead of immediately
closing the connection.

* daemon/dispatch.c: Improve error messages when RPC reply
  can not be sent

When libvirtd fails to serialize a message to XDR the client
connection is terminated immediately. To enable this to be
diagnosed, log the message which caused the problem on the
server

* daemon/dispatch.c: Log XDR serialization failures

Like the comment suggested, we just open the file and pass the file
descriptor to uml. The input "stream" is set to "null", since I couldn't
find any useful way to actually use a file for input for a chardev and
this also mimics what e.g. QEmu does internally.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

Instead of using one big traversal spec for lookup use a set of
more fine grained traversal specs that are selected based on the
actual needs of the lookup.

This gives up to 20% speedup for certain operations like domain
listing due to less HTTP(S) traffic.

RHEL-5 Xen doesn't support the old style vnc configuration. In sexpr, we
can't really check it with rhel5-api turned on. However, for XM
configuration files it's sufficient to use cfg version 1 instead of 2.

This caused unnecessary make check failures when libvirt is configured
--with-rhel5-api

The most common cause of errors with rhel5-api turn on was missing
"(type ioemu)" in sexpr or its equivalent in XM configuration file. This
happens because the presence of that part in sexpr (or cfg) depends on
xen version the host is running. Let's avoid it by explicitly specifying
interface model which ensures "type ioemu" will always be emitted.

This patch adds

    <model type='e1000'/>

withing the interface element in all affected xml files. And

    (model 'e1000')

to all corresponding sexpr files with similar fix to cfg files. Such
configuration works regardless on Xen version.

If linuxNodeInfoCPUPopulate() fails, the test would just print "FAILED"
which is not very informative. It's better to print the real error.

* src/xenapi/xenapi_driver.c (xenapiDomainGetInfo): Avoid using
XEN_VM_POWER_STATE_UNKNOWN, which disappeared in newer xenapi.
* src/xenapi/xenapi_utils.c (mapPowerState): Likewise.

Previously QEMU enabled KQEMU by default and had -no-kqemu.
0.11.x switched to requiring -enable-kqemu. 0.12.x dropped
kqemu entirely. This patch adds support for -enable-kqemu
so 0.11.x works. It replaces a huge set of if() with a
switch() to make the code a bit more readable.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Support
  -enable-kqemu

With the previous storage pool UUID source not all storage pools
had a proper UUID, especially GSX storage pools. The mount path
is unique per host and cannot change during the lifetime of the
datastore. Therefore, it's MD5 sum can be used as UUID.

Use gnulib's crypto/md5 module to generate the MD5 sum.

Xen supports on_crash actions coredump-{destroy,restart}.  libvirt
cannot parse config returned by xend that contains either of these
actions

xen52 # xm li -l test | grep on_crash
    (on_crash coredump-restart)
xen52 # virsh dumpxml test
error: internal error unknown lifecycle type coredump-restart

This patch adds a new virDomainLifecycleCrash enum and appends
the new options to existing destroy, restart, preserve, and
rename-restart options.

We already filled the PCI address structure when we checked whether it's
free or not, so let's just use the structure here instead of filling it
again.

* src/vbox/vbox_tmpl.c (vboxDomainCreateWithFlags): Split...
(vboxStartMachine): ...into new helper.

* configure.ac (vbox_xpcomc_dir): Add another potential dir.

* src/xenapi/xenapi_utils.h (createVifNetwork): Delete prototype.
* src/xenapi/xenapi_utils.c (createVifNetwork): Change signature,
and use virAsprintf.  Detect allocation failure.
(createVMRecordFromXml): Adjust caller.

* src/storage/storage_backend.c (virStorageBackendCreateQemuImg)
(virStorageBackendCreateQcowCreate): Use virAsprintf instead.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskCreateVol, virStorageBackendDiskPartFormat):
Likewise.

* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Fix spacing.

* src/qemu/qemu_driver.c (qemudGetProcessInfo): Clean up.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/xen/sexpr.c (_string2sexpr): Likewise.

I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML.  This would allow vendor
extensions of specific devices.  The patch includes a test for the new
attributes as well.

Patrick Dignan

* src/uml/uml_driver.c (umlMonitorCommand): Validate that enough
bytes were read to dereference both res.length, and that many
bytes from res.data.
Reported by Soren Hansen.

* src/nwfilter/nwfilter_driver.c (nwfilterLog): Delete.
(nwfilterDriverStartup): Use virReportOOMError instead.

node_device/node_device_driver.c: In function 'nodeDeviceVportCreateDelete':
node_device/node_device_driver.c:423: error: implicit declaration of function 'stat' [-Wimplicit-function-declaration]

* src/node_device/node_device_driver.c (includes): Add <sys/stat.h>.

Doing `virsh schedinfo rhel5u3 --cap 65535' the hypervisor does the
call, but does not change the value nor raise an error. Best is just to
consider it's not in the allowed values. The problem is that the error
won't be output since the xend driver will then be called and raise an
error

    error: this function is not supported by the hypervisor: unsupported
    in xendConfigVersion < 4

which will override the useful information from
xenUnifiedDomainSetSchedulerParameters(). So best is to also invert the
order in which the xen sub-drivers are called.

* src/xen/xen_hypervisor.c: mark 65535 cap value as out of bound
* src/xen/xen_hypervisor.c: reverse the order of the calls to the xen
  sub drivers to get the error message if needed

Some kernels, such as the one used in RHEL-5, have vport_create and
vport_delete operation files in /sys/class/scsi_host/hostN directory
instead of /sys/class/fc_host/hostN. Let's check both paths for
compatibility reasons.

This also removes unnecessary '/' characters from sysfs paths containing
LINUX_SYSFS_FC_HOST_PREFIX.

NodeDeviceCreateXML and NodeDeviceDestroy methods added for NPIV were
using the wrong privateData field for the remote driver. This doesn't
impact KVM, since the remote driver handles everything, thus
privateData == devMonPrivateData. It does impact Xen though, because
the remote driver only handles a subset of methods and thus
privateData != devMonPrivateData.

In case an optional object cannot be found the lookup function is
left early and the cleanup code is not executed.

This pattern occurs in some other functions too.

The current version of the qemu managed save implementation
is subject to a race where the domain shuts down between
the time that we start the command and the time that we
actually try to do the save.  Close this race by making
qemuDomainSaveFlags() expect both the driver and the passed-in
vm object to be locked before executing.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Add documentation for features added a while ago.

* docs/formatdomain.html.in (Time keeping): Update documentation
of <clock> element to match 0.8.0 addition.

Fixing a problem in the build on cygwin due to missing #define's.

This also makes the message consistent with the message used in error
path of qemudDomainAttachHostPciDevice.