Just tweak it at build time depending on what polkit version we are
building for.

With this script you can run libvirt programs without needing to
install them first.  You just have to do for example:

  ./run ./tools/virsh [args ...]

If you are already in the tools/ subdirectory, then the following
command will also work:

  ../run ./virsh [...]

You can also run the C programs under valgrind like this:

  ./run valgrind [valgrind opts...] ./program

or under gdb:

  ./run gdb --args ./program

This also works with sudo (eg. if you need root access for libvirt):

  sudo ./run ./tools/virsh list --all

Derived from libguestfs and simplified.  The ./run script in
libguestfs is much more sophisticated:

https://github.com/libguestfs/libguestfs/blob/master/run.in

In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.

Take advantage of the previously added monitor helpers to
create a test suite for the QEMU JSON monitor impl. As a
proof of concept, this tests the 'qemuMonitorGetStatus'
implementation
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch makes search.php autogenerated from search.php.in, thus
removing hardcoded menus, footer etc. and the search.php is added to
.gitignore.

There is new rule added for *.php files (to make it bit less
hardcoded) that takes *.php.code.in and injects it inside the
generated *.php (xslt was not happy about php code in the source xml).

There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

One of our latest patches added some files to .gitignore. However,
not in the right place leaving the file not sorted. Since my git
is set up to sort these files contents, fix this issue as it keeps
showing up in git status.

This defines a new RPC protocol to be used between the LXC
controller and the libvirtd LXC driver. There is only a
single RPC message defined thus far, an asynchronous "EXIT"
event that is emitted just before the LXC controller process
exits. This provides the LXC driver with details about how
the container shutdown - normally, or abnormally (crashed),
thus allowing the driver to emit better libvirt events.

Emitting the event in the LXC controller requires a few
little tricks with the RPC service. Simply calling the
virNetServiceClientSendMessage does not work, since this
merely queues the message for asynchronous processing.
In addition the main event loop is no longer running at
the point the event is emitted, so no I/O is processed.

Thus after invoking virNetServiceClientSendMessage it is
necessary to mark the client as being in "delayed close"
mode. Then the event loop is run again, until the client
completes its close - this happens only after the queued
message has been fully transmitted. The final complexity
is that it is not safe to run virNetServerQuit() from the
client close callback, since that is invoked from a
context where the server is locked. Thus a zero-second
timer is used to trigger shutdown of the event loop,
causing the controller to finally exit.

* src/Makefile.am: Add rules for generating RPC protocol
  files and dispatch methods
* src/lxc/lxc_controller.c: Emit an RPC event immediately
  before exiting
* src/lxc/lxc_domain.h: Record the shutdown reason
  given by the controller
* src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register
  RPC program and event handler. Add callback to let
  driver receive EXIT event.
* src/lxc/lxc_process.c: Use monitor exit event to decide
  what kind of domain event to emit
* src/lxc/lxc_protocol.x: Define wire protocol for LXC
  controller monitor.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If from a clean GIT checkout 'make -j 8' is run, the ESX
and Hyper-V code will be generated multiple times over.
This is because there are multiple files being generated
from one invocation of the generator script. make does not
realize this and so invokes the generator once per file.
This doesn't matter with serialized builds, but with
parallel builds multiple instances of the generator get
run at once.

make[2]: Entering directory `/home/berrange/src/virt/libvirt/src'
  GEN    util/virkeymaps.h
  GEN    remote/remote_protocol.h
  GEN    remote/remote_client_bodies.h
  GEN    remote/qemu_protocol.h
  GEN    remote/qemu_client_bodies.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi.generated.h
  GEN    esx/esx_vi.generated.c
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  ...snip...
  GEN    hyperv/hyperv_wmi.generated.h
  GEN    libvirt_qemu_probes.h
  GEN    locking/qemu-sanlock.conf
  GEN    hyperv/hyperv_wmi.generated.c
  GEN    rpc/virnetprotocol.h
  GEN    hyperv/hyperv_wmi_classes.generated.typedef
  GEN    hyperv/hyperv_wmi_classes.generated.h
  GEN    hyperv/hyperv_wmi_classes.generated.c
  GEN    rpc/virkeepaliveprotocol.h
  GEN    remote/remote_protocol.c
  GEN    remote/qemu_protocol.c
  GEN    rpc/virkeepaliveprotocol.c
  GEN    rpc/virnetprotocol.c
  GEN    libvirt.def

Prevent this using a timestamp file to control generation,
as was previously done for the python bindings in commit
a7868e01Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: NSebastian Wiedenroth <wiedi@frubar.net>

since it's an autogenerated file

The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:

make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.

Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.

* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.

When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.

To address this, the augeas test cases need to be auto-generated
from the example config files.

* build-aux/augeas-gentest.pl: Helper to generate an
  augeas test file, substituting in elements from the
  example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
  auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
  src/locking/test_libvirt_sanlock.aug,
  src/locking/test_libvirt_sanlock.aug.in,
  src/lxc/test_libvirtd_lxc.aug,
  src/lxc/test_libvirtd_lxc.aug.in,
  src/qemu/test_libvirtd_qemu.aug,
  src/qemu/test_libvirtd_qemu.aug.in: Remove example
  config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* .gitignore: Exempt recent test binary and probes.h name change.

Use a witness file approach like we do for python/generator.py,
as suggested by Eric. Fixes the build issue reported here:

https://www.redhat.com/archives/libvir-list/2012-April/msg01435.htmlSigned-off-by: NCole Robinson <crobinso@redhat.com>

Recent git reorders .gitignore alphabetically. However, changes are
not committed and I am tired of discarding these changes from
my patches.

The daemon-conf test script continues to be very fragile to
changes in libvirt. It currently fails 1 time in 3/4 due
to race conditions in startup/shutdown of the test script.

Replace it with a proper test case tailored to the code
being tested

* tests/Makefile.am: Remove daemon-conf, add libvirtdconftest
* tests/daemon-conf: Delete obsolete test
* tests/libvirtdconftest.c: Test config file handling

Otherwise, 'make check' breaks since commit bc1ff160 deleted
qparams.h.  A later patch will ensure that viruri takes over
what qparams used to do.

* tests/qparamtest.c (mymain): Delete, now that we have viruri.
* tests/Makefile.am (check_PROGRAMS, TESTS, qparamtest_SOURCES):
Delete old test.
* .gitignore: Add recent test additions.

The file daemon/probes.h used to be generated as part of a build, but
is no longer used. However, a stale copy of it lying around could
cause a build to fail. Removing it from .gitignore will make it more
likely someone will notice that they have it lying around.

QMP commands don't need to be escaped since converting them to json
also escapes special characters. When a QMP command fails, however,
libvirt falls back to HMP commands. These fallback functions
(qemuMonitorText*) do their own escaping, and pass the result directly
to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these
pre-escaped commands will be escaped again when converted to json,
which can result in the wrong arguments being sent.

For example, a filename test\file would be sent in json as
test\\file.

This prevented attaching an image file with a " or \ in its name in
qemu 1.0.50, and also broke rbd attachment (which uses backslashes to
escape some internal arguments.)
Reported-by: NMasuko Tomoya <tomoya.masuko@gmail.com>
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 8f00276c consolidated other
.gitignore files to the master one, but forgot to add some test output
files.

Unlike .cvsignore under CVS, git allows for ignoring nested
names.  We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.

* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.

Fix a build failure:

virt-host-validate.c: In function 'main':
virt-host-validate.c:82:5: error: implicit declaration of function 'setlocale' [-Werror=implicit-function-declaration]
virt-host-validate.c:82:5: error: nested extern declaration of 'setlocale' [-Werror=nested-externs]
virt-host-validate.c:82:20: error: 'LC_ALL' undeclared (first use in this function)

* tools/virt-host-validate.c: Add <locale.h>.
* .gitignore: Ignore built executable.

On RHEL5, I got:
util/virrandom.c:66: warning: nested extern declaration of '_gl_verify_function66' [-Wnested-externs]

The fix is to hoist the verify earlier.  Also some other hodge-podge
fixes I noticed while reviewing Dan's recent series.

* .gitignore: Ignore new test.
* src/util/cgroup.c: Bump copyright year.
* src/util/virhash.c: Fix typo in description.
* src/util/virrandom.c (virRandomBits): Mark doc comment, and
hoist assert to silence older gcc.

The keepalive program has two procedures: PING, and PONG.
Both are used only in asynchronous messages and the sender doesn't wait
for any reply. However, the party which receives PING messages is
supposed to react by sending PONG message the other party, but no
explicit binding between PING and PONG messages is made. For backward
compatibility neither server nor client are allowed to send keepalive
messages before checking that remote party supports them.

Add a test for the simple parts of my indentation changes, and
fix the fallout.

* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.

* .gitignore: Add exemption.

When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.

To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt

* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
  with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
  tests/shunloadtest.c: A test case to unload libvirt while
  a thread is still running.

* .gitignore: Exempt recently added generated files.

Add a generator script to generate the structs and serialization
information for OpenWSMAN.

openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6.
There are also disabled sections that would use ws_serializer_free_mem
but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix
this have been posted upstream.

I did 'git add .' while in the middle of 'make syntax-check', and
it picked up a temporary file that should not be committed.

* .gitignore: Ignore sc_* from syntax check.

* .gitignore: Ignore qemu-sanlock.conf.

Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim

const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
                             virKeycodeSet to_offset,
                             int key_value);

* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
  virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
  out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h

Commit 8665f855 introduced a slight regression in doc generation,
since make only quits a rule on the first failed command ending
with a newline rather than a semicolon.

* docs/Makefile.am (html/index.html): Don't use xmllint unless
xsltproc succeeded.
* .gitignore: Ignore recently updated stamp file name.

* .gitignore: Exempt jsontest binary.

This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work

As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.

* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
  old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
  code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
  APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
  code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la