Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.

For reuse with other Strip* functions.

In one of my previous commits (49ed6cff) I've introduced a test
among with some files stored under virnetdevtestdata folder.
While this works perfectly within a git tree, the folder was not
getting into .tar.gz and therefore the dist-check would fail.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit id 'b77ce18a' added a new bitmap, but neglected to virBitmapFree it

This is yet another test for check of basic functionality of our
NIC state handling code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add FromVol at the end. This function will create the qemu-img
command line from volume definitions and check them.

This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.

https://bugzilla.redhat.com/show_bug.cgi?id=1210545

Request that the number be parsed as decimal, to allow 08
and 09.

Format it with the leading zero, 1.01 and 1.10 are two
different versions.

https://bugzilla.redhat.com/show_bug.cgi?id=1210650

We don't format the default '-1' fields back.

The tag is already marked as optional in the schema, so no changes
are needed there.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1202606

There are two leftover unused variables. Remove them and clean up the
fallout of the change.

rfc3986 states that the separator in URI path is a single slash.
Multiple slashes may potentially lead to different resources and thus we
should not remove them.

Add test infrastructure for virFileSanitizePath so that it can be
sensibly refactored later.

This new internal API checks if given CGroup controller is
available.  It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit cd5dc303 added this test, but it fails if
LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST is not defined:

6) Xen XM-2-XML Format fullvirt-multiusb
... libvirt:  error : unsupported configuration: multiple USB
devices not supported
FAILED

In virDomainVirtioSerialAddrNext, add another controller
if we've exhausted all ports of the existing controllers.

https://bugzilla.redhat.com/show_bug.cgi?id=1076708

Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.

Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).

Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606
https://bugzilla.redhat.com/show_bug.cgi?id=1076708

Test changes:
* virtio-auto.args
  Filling out the port when just the controller is specified.
  switched from using
    maxport + 1
  to:
    first free port on the controller
* virtio-autoassign.args
  Filling out the address when no <address> is specified.
  Started using all the controllers instead of 0, also discards
  the bus value.
* xml -> xml output of virtio-auto
  The port assignment is no longer done as a part of XML parsing,
  so the unspecified values stay 0.

Add a test to demonstrate the effect of automatic virtio-serial
address assignment.

The 7c3c7f21 and f5c2d6 commits introduced a nodeinfo test.
In order to do that, some parts of sysfs had to be copied.
However, sysfs is full of symlinks, so during copying some
symlinks broke. Remove them, as on different systems they can
point to different files or be broken. At the same time, we don't
need all files added in those commits. For instance we don't care
about 'uevent' files, 'power' folders, and others.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In the order of appearance:

* MAX_LISTEN - never used
  added by 23ad665c (qemud) and addec57 (lock daemon)

* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b5

* virLockError - never used, added by eb8268a4

* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
  unused since the removal of ADD_ARG_LIT in d8b31306

* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e7

* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7b

* TEST_MODEL_WORDSIZE - unused since c25c18f7

* TEMPDIR - never used, added by 714bef5b

* NSIG - workaround around old headers
  added by commit 60ed1d2a
  unused since virExec was moved by commit 02e86910

* DO_TEST_PARSE - never used, added by 9afa0060

* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb66

This would have caught the bug fixed by Wei's commit c13de016Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NEric Blake <eblake@redhat.com>

We need to mock virFileExists to return true for "/dev/kvm" because the
test should not depend on host system.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This reverts commit 49bf09d1.  That
commit is wrong and doesn't fix the issue.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

On IRC, Hydrar pointed a problem where 'virsh edit' failed on
his domain created through an ISCSI pool managed by virt-manager,
all because the XML included a block device with colons in the
name.

* docs/schemas/basictypes.rng (absFilePath): Add colon as safe.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.xml: New file.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.args: Likewise.
* tests/qemuxml2argvtest.c (mymain): Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

It only deals with a single thread.

Starting a qemu VM with a memory module that has the base address
specified results in the following error:

 error: internal error: early end of file from monitor: possible problem:
 2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,
 id=dimm0,slot=0,base=4294967296: Property '.base' not found

The correct property name for the base address is 'addr'.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.

The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.

To allow adding more tests, refactor the XML-2-XML test so that the
files are not reloaded always and clarify the control flow.

Result of this changes is that the active and inactive portions of the
XML are tested in separate steps rather than one test step.

Function virQEMUCapsInitGuestFromBinary detect kvm support by testing
whether /dev/kvm exists or whether we pass path to kvmbin.  Provide the
path we are testing via kvmbin for testing purpose instead of detecting
presence of /dev/kvm to successfully run the tests on all hosts.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit 2360fe5d updated formating of <domain> element but forgot to
update qemucaps2xmldata xml files.  In addition the test code was broken
too.  Update the xml files and return -1 if testCompareXMLToXML fails
together with indentation fix.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.

This patch adds code that parses and formats configuration for memory
devices.

A simple configuration would be:
<memory model='dimm'>
  <target>
    <size unit='KiB'>524287</size>
    <node>0</node>
  </target>
</memory>

A complete configuration of a memory device:
<memory model='dimm'>
  <source>
    <pagesize unit='KiB'>4096</pagesize>
    <nodemask>1-3</nodemask>
  </source>
  <target>
    <size unit='KiB'>524287</size>
    <node>1</node>
  </target>
</memory>

This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.

To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.

Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.

Lets not give a bad example and check for return values of
virNetwork* APIs called within the test. Even though it's
unlikely that any API will fail, it can happen. We're connected
to the test driver after all, and our API sequence is correct. So
test driver should fail only in case of bug or OOM.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

My commit 2dbfa716 added test data for vircgrouptest but forgot to
distribute the new directory.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>