Similar to the qemuDomainSecretDiskPrepare, generate the secret
for the Hostdev's prior to call qemuProcessLaunch which calls
qemuBuildCommandLine. Additionally, since the secret is not longer
added as part of building the command, the hotplug code will need
to make the call to add the secret in the hostdevPriv.

Since this then is the last requirement to pass a virConnectPtr
to qemuBuildCommandLine, we now can remove that as part of these
changes. That removal has cascading effects through various callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modeled after the qemuDomainDiskPrivatePtr logic, create a privateData
pointer in the _virDomainHostdevDef to allow storage of private data
for a hypervisor in order to at least temporarily store auth/secrets
data for usage during qemuBuildCommandLine.

NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the auth/secret data, there's no need to add
code to handle this new structure there.

Updated copyrights for modules touched. Some didn't have updates in a
couple years even though changes have been made.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than needing to pass the conn parameter to various command
line building API's, add qemuDomainSecretPrepare just prior to the
qemuProcessLaunch which calls qemuBuilCommandLine. The function
must be called after qemuProcessPrepareHost since it's expected
to eventually need the domain masterKey generated during the prepare
host call. Additionally, future patches may require device aliases
(assigned during the prepare domain call) in order to associate
the secret objects.

The qemuDomainSecretDestroy is called after the qemuProcessLaunch
finishes in order to clear and free memory used by the secrets
that were recently prepared, so they are not kept around in memory
too long.

Placing the setup here is beneficial for future patches which will
need the domain masterKey in order to generate an encrypted secret
along with an initialization vector to be saved and passed (since
the masterKey shouldn't be passed around).

Finally, since the secret is not added during command line build,
the hotplug code will need to get the secret into the private disk data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a new private structure to hold qemu domain auth/secret data.
This will be stored in the qemuDomainDiskPrivate as a means to store the
auth and fetched secret data rather than generating during building of
the command line.

The initial changes will handle the current username and secret values
for rbd and iscsi disks (in their various forms). The rbd secret is
stored as a base64 encoded value, while the iscsi secret is stored as
a plain text value. Future changes will store encoded/encrypted secret
data as well as an initialization vector needed to be given to qemu
in order to decrypt the encoded password along with the domain masterKey.
The inital assumption will be that VIR_DOMAIN_SECRET_INFO_PLAIN is
being used.

Although it's expected that the cleanup of the secret data will be
done immediately after command line generation, reintroduce the object
dispose function qemuDomainDiskPrivateDispose to handle removing
memory associated with the structure for "normal" cleanup paths.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since the field is internal to libvirt we can allow the users to modify
it.

Both disk->src->shared and disk->src->readonly can't be modified when
changing disk source for floppy and cdrom drives since both arguments
are passed as arguments of the disk rather than the image in qemu.

Historically these fields have only two possible values since they are
represented as XML thus we need to ignore if user did not provide them
and thus we are treating them as false.

disk->dst represents the <target> element in the XML.

Similarly to what commit 71408079 did with some internal paths,
clear vnc socket paths that were generated by us.  Having such path in
the definition can cause trouble when restoring the domain.  The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.

To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated.  And mark it as autogenerated
if it already exists and we're parsing live XML.

Best viewed with '-C'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add virDomainObjGetShortName() and use it.  For now that's used in one
place, but we should expose it so that future patches can use it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Introduced by commit 15ad2ecf.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This an ubuntu/debian packaging convention. At one point it may have
been an actually different binary, but at least as of ubuntu precise
(the oldest supported ubuntu distro, released april 2012) kvm-img is
just a symlink to qemu-img for back compat.

I think it's safe to drop support for it

It already labels abritrary paths, so it's just the naming that was
wrong.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When creating the master key, we used mode 0600 (which we should) but
because we were creating it as root, the file is not readable by any
qemu running as non-root.  Fortunately, it's just a matter of labelling
the file.  We are generating the file path few times already, so let's
label it in the same function that has access to the path already.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.

As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.

During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.

This is backed by the qemu device "pxb".

The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.

busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.

During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.

No need to keep two separate conditions. A slight juggling of return
values is needed to accomodate virDomainObjWaitUntil.

Move including of gnutls/gnutls.h in qemu/qemu_domain.c under the
"ifdef WITH_GNUTLS" check because otherwise it fails like this:

  CC       qemu/libvirt_driver_qemu_impl_la-qemu_domain.lo
qemu/qemu_domain.c:50:10: fatal error: 'gnutls/gnutls.h' file not found

in case if gnutls is not installed on the system.

Some places already check for "virt-" prefix as well as plain "virt".
virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices
having assigned the same unnumbered "pci" alias.

Add a test for the "virt-2.6" machine type which also omits the
<model type='virtio'/> in <interface>, to check if
qemuDomainDefaultNetModel works too.

https://bugzilla.redhat.com/show_bug.cgi?id=1325085

Our use of gnutls_rnd(), introduced with commit ad7520e8, is
conditional to the availability of the <gnutls/crypto.h> header
file.

Such check, however, turns out not to be strict enough, as there
are some versions of GnuTLS (eg. 2.8.5 from CentOS 6) that provide
the header file, but not the function itself, which was introduced
only in GnuTLS 2.12.0.

Introduce an explicit check for the function.

Add a masterKey and masterKeyLen to _qemuDomainObjPrivate to store a
random domain master key and its length in order to support the ability
to encrypt/decrypt sensitive data shared between libvirt and qemu. The
key will be base64 encoded and written to a file to be used by the
command line building code to share with qemu.

New API's from this patch:

  qemuDomainGetMasterKeyFilePath:
    Return a path to where the key is located

  qemuDomainWriteMasterKeyFile: (private)
    Open (create/trunc) the masterKey path and write the masterKey

  qemuDomainMasterKeyReadFile:
    Using the master key path, open/read the file, and store the
    masterKey and masterKeyLen. Expected use only from qemuProcessReconnect

  qemuDomainGenerateRandomKey: (private)
    Generate a random key using available algorithms

    The key is generated either from the gnutls_rnd function if it
    exists or a less cryptographically strong mechanism using
    virGenerateRandomBytes

   qemuDomainMasterKeyRemove:
    Remove traces of the master key, remove the *KeyFilePath

  qemuDomainMasterKeyCreate:
    Generate the domain master key and save the key in the location
    returned by qemuDomainGetMasterKeyFilePath.

    This API will first ensure the QEMU_CAPS_OBJECT_SECRET is set
    in the capabilities. If not, then there's no need to generate
    the secret or file.

The creation of the key will be attempted from qemuProcessPrepareHost
once the libDir directory structure exists.

The removal of the key will handled from qemuProcessStop just prior
to deleting the libDir tree.

Since the key will not be written out to the domain object XML file,
the qemuProcessReconnect will read the saved file and restore the
masterKey and masterKeyLen.

The paths have the domain ID in them.  Without cleaning them, they would
contain the same ID even after multiple restarts.  That could cause
various problems, e.g. with access.

Add function qemuDomainClearPrivatePaths() for this as a counterpart of
qemuDomainSetPrivatePaths().
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since commit 9dca74ee, the function can take driver and a vm, no
need to overcomplicate.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Move the function to qemu_domain.c and export them for further use.

The function has terrible semantics. Split it into two functions.

The postParse callback is the correct place to generate default values
that should be present in offline XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NCristian Klein <cristiklein@gmail.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.

Allow pinning for inactive vcpus. The pinning mask will be automatically
applied as we would apply the default mask in case of a cpu hotplug.

Setting the scheduler settings for a vcpu has the same semantics.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1306556

Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.

The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca3).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit f1a89a8b allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.

Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.

https://bugzilla.redhat.com/show_bug.cgi?id=1267256

GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.

Ending a nested job is no different from ending any other (non-async)
job, after all the code in qemuDomainBeginJobInternal does not handle
them differently either. Thus we should call qemuDomainObjEndJob to stop
nested jobs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Move function into qemu_domain.c.

Move qemuDomainSupportsNicdev and qemuDomainSupportsNetdev into qemu_domain.c
and expose from there.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>