Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt
切换分支/标签
  1. 27 6月, 2020 3 次提交
  3. 19 12月, 2019 1 次提交
    • D
      Introducing new address type='unassigned' for PCI hostdevs · 96999404
      由 Daniel Henrique Barboza 提交于 
      This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.

This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.

Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
      96999404
  5. 06 8月, 2019 1 次提交
    • M
      lib: Format PCI address differently · 9b332820
      由 Michal Privoznik 提交于 
      Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:

  "%04x:%02x:%02x.%d"

The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
      9b332820
  7. 26 6月, 2019 1 次提交
  9. 12 4月, 2019 1 次提交
  11. 19 2月, 2019 1 次提交
  13. 14 12月, 2018 1 次提交
    • D
      Remove all Author(s): lines from source file headers · 60046283
      由 Daniel P. Berrangé 提交于 
      In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
      60046283
  15. 15 11月, 2018 2 次提交
  17. 17 9月, 2018 1 次提交
  19. 04 9月, 2018 4 次提交
  21. 28 8月, 2018 1 次提交
  23. 21 7月, 2017 1 次提交
  25. 27 6月, 2016 1 次提交
    • L
      util: move virInterface(State|Link)/virNetDevFeature from conf to util · 638c6e5b
      由 Laine Stump 提交于 
      These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.

This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.

The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")
      638c6e5b
  27. 21 5月, 2016 1 次提交
    • L
      conf: allow type='pci' addresses with no address attributes specified · 8f578716
      由 Laine Stump 提交于 
      Prior to this, <address type='pci'/> wasn't allowed when parsing
(domain+bus+slot+function needed to be a "valid" PCI address, meaning
that at least one of domain/bus/slot had to be non-0), the RNG
required bus to be specified, and if type was set to PCI when
formatting, domain+bus+slot+function would always be output.

This makes all the address attributes optional during parse and RNG
validation, and suppresses domain+bus+slot+function if domain+bus+slot
are all 0 (NB: if d+b+s are all 0, any value for function is
nonsensical as that will never happen in the real world, and after
the next patch we will always assign a real working address to any
empty PCI address before it is ever output to anywhere).

Note that explicitly setting all attributes to 0 is equivalent to
setting none of them, which is okay, since 0000:00:00 is reserved in
any PCI bus setup, and can't be used anyway.
      8f578716
  29. 02 5月, 2016 1 次提交
    • M
      Change virDevicePCIAddress to virPCIDeviceAddress · c36b1f7b
      由 Martin Kletzander 提交于 
      We had both and the only difference was that the latter also included
information about multifunction setting.  The problem with that was that
we couldn't use functions made for only one of the structs (e.g.
parsing).  To consolidate those two structs, use the one in virpci.h,
include that in domain_conf.h and add the multifunction member in it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      c36b1f7b
  31. 09 8月, 2015 1 次提交
    • L
      conf: more useful error message when pci function is out of range · f8fe8f03
      由 Laine Stump 提交于 
      If a pci address had a function number out of range, the error message
would be:

  Insufficient specification for PCI address

which is logged by virDevicePCIAddressParseXML() after
virDevicePCIAddressIsValid returns a failure.

This patch enhances virDevicePCIAddressIsValid() to optionally report
the error itself (since it is the place that decides which part of the
address is "invalid"), and uses that feature when calling from
virDevicePCIAddressParseXML(), so that the error will be more useful,
e.g.:

  Invalid PCI address function=0x8, must be <= 7

Previously, virDevicePCIAddressIsValid didn't check for the
theoretical limits of domain or bus, only for slot or function. While
adding log messages, we also correct that ommission. (The RNG for PCI
addresses already enforces this limit, which by the way means that we
can't add any negative tests for this - as far as I know our
domainschematest has no provisions for passing XML that is supposed to
fail).

Note that virDevicePCIAddressIsValid() can only check against the
absolute maximum attribute values for *any* possible PCI controller,
not for the actual maximums of the specific controller that this
device is attaching to; fortunately there is later more specific
validation for guest-side PCI addresses when building the set of
assigned PCI addresses. For host-side PCI addresses (e.g. for
<hostdev> and for network device pools), we rely on the error that
will be logged when it is found that the device doesn't actually
exist.

This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=1004596
      f8fe8f03
  33. 21 7月, 2015 1 次提交
    • M
      nodedev: add RDMA and tx-udp_tnl-segmentation NIC capabilities · ac3ed208
      由 Moshe Levi 提交于 
      Adding functionality to libvirt that will allow
it query the interface for the availability of RDMA and
tx-udp_tnl-segmentation Offloading NIC capabilities

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <feature name='rdma'/>
    <feature name='txudptnl'/>
    <capability type='80203'/>
  </capability>
</device>
      ac3ed208
  35. 05 3月, 2015 1 次提交
    • J
      SRIOV NIC offload feature discovery · c9027d8f
      由 James Chapman 提交于 
      Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
      c9027d8f
  37. 09 12月, 2014 1 次提交
  39. 23 7月, 2014 1 次提交
    • J
      Introduce virTristateSwitch enum · 3227e17d
      由 Ján Tomko 提交于 
      For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression
      3227e17d
  41. 11 6月, 2014 1 次提交
    • M
      virInterface: Expose link state & speed · 3db89662
      由 Michal Privoznik 提交于 
      Currently it is not possible to determine the speed of an interface
and whether a link is actually detected from the API. Orchestrating
platforms want to be able to determine when the link has failed and
where multiple speeds may be available which one the interface is
actually connected at. This commit introduces an extension to our
interface XML (without implementation to interface driver backends):

  <interface type='ethernet' name='eth0'>
    <start mode='none'/>
    <mac address='aa:bb:cc:dd:ee:ff'/>
    <link speed='1000' state='up'/>
    <mtu size='1492'/>
    ...
  </interface>

Where @speed is negotiated link speed in Mbits per second, and state
is the current NIC state (can be one of the following:  "unknown",
"notpresent", "down", "lowerlayerdown","testing", "dormant", "up").
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      3db89662
  43. 08 4月, 2014 1 次提交
  45. 25 3月, 2014 1 次提交
  47. 02 5月, 2013 1 次提交
    • M
      virutil: Move string related functions to virstring.c · 7c9a2d88
      由 Michal Privoznik 提交于 
      The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
      7c9a2d88
  49. 21 12月, 2012 6 次提交
  51. 15 10月, 2012 1 次提交
    • L
      conf: fix virDevicePCIAddressEqual args · 31094559
      由 Laine Stump 提交于 
      This function really should have been taking virDevicePCIAddress*
instead of the inefficient virDevicePCIAddress (results in copying two
entire structs onto the stack rather than just two pointers), and
returning a bool true/false (not matching is not necessarily a
"failure", as a -1 return would imply, and also using "if
(!virDevicePCIAddressEqual(x, y))" to mean "if x == y" is just a bit
counterintuitive).
      31094559
  53. 21 9月, 2012 1 次提交
  55. 18 8月, 2012 2 次提交