- 08 6月, 2016 31 次提交
-
-
由 Daniel P. Berrange 提交于
The virConnectOpenInternal method opens the libvirt client config file and uses it to resolve things like URI aliases. There may be driver specific things that are useful to store in the config file too, so rather than have them re-parse the same file, pass the virConfPtr down to the drivers. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Add support for a "tls_priority" URI parameter in remote driver URIs. eg qemu+tls://localhost/session?tls_priority=NORMAL:-VERS-SSL3.0Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Add a "tls_priority" config option to /etc/libvirt/libvirtd.conf to allow the administrator to override the built-in default setting. This only affects the server side configuration. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Extend the virNetTLSContextNew* constructors to allow the TLS priority string to be passed in, overriding the compile time default. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Currently libvirt calls gnutls_set_default_priority() which on old systems resolves to "NORMAL" while new systems it resolves to "@SYSTEM". Either way, this is a global default that is identical across all apps. We want to allow distros to flexibility to define a custom default string for libvirt priority, so add a --tls-priority=STRING flag to configure to enable this to be set. It is expected that distros would use this when creating RPM/Deb/etc packages, according to their preferred crypto handling policies. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Currently we set the gnutls log function when creating a TLS context, however, the setting is in fact global, not per context. So we should be setting it when we first call gnutls_global_init() instead. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
We need to use the gnutls_priority_set_direct method which was not introduced until 2.1.7, so bump version to 2.2.0 which is the first stable release with it included. This release dates from Dec 2007 so it is reasonable to ditch support for the 1.x.x series for gnutls releases entirely. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Pavel Hrdina 提交于
Currently if a guest has listen address 0.0.0.0 or [::] and you run "virsh domdisplay $domain" you always get "spice://localhost:$port". We want to print better address if someone is connected from a different computer using "virsh -c qemu+ssh://some.host/system". This patch fixes the behavior of virsh to print in this case "spice://some.host:$port". Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1332446Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1335617Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Michal Privoznik 提交于
We use libxml2 APIs in the test (e.g. xmlFreeDoc) but not link with -lxml2 which can cause problems: /usr/bin/ld: virschematest.o: undefined reference to symbol 'xmlFreeDoc@@LIBXML2_2.4.30' //usr/lib/x86_64-linux-gnu/libxml2.so.2: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status Makefile:4702: recipe for target 'virschematest' failed Reported-by: NKaterina Koukiou <k.koukiou@googlemail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
So the story goes like this. The testSchemaDirs() function is called with: a) the schema file, b) list of the directories that contains XMLs documents that should be checked against the schema file from a). However, the directories in the list are really just their names and it's up to testSchemaDirs to construct the absolute path and call testSchemaDir() which then does the actual validation. The absolute path is constructed, but never actually used (maybe due to a typo). Thus a VPATH build is broken. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Ján Tomko 提交于
Instead of calling xmllint via a shell script, use our virXMLValidator API to do it directly via libxml.
-
由 Ján Tomko 提交于
Split out the code for XML validation into a new function.
-
由 Ján Tomko 提交于
Split out all the code initializing the validator to a separate function.
-
由 Ján Tomko 提交于
Split out the code cleaning up the validator.
-
由 Ján Tomko 提交于
Store all the data related to RNG validation in one structure to allow splitting virXMLValidateAgainstSchema.
-
由 Peter Krempa 提交于
In commit 1e38ef72 the disk startup policy check was moved prior to the call to virDomainObjSetDefTransient which dropped the disk from the config rather than the def to be started which is a bug. Additionally we'd not report the disk change event for this since the disk aliases were not set at that point. Finally 'volume' based disks would not work with startup policy too. Fix it by moving it back after the definition is copied, aliases are assigned and disk sources are translated. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1341415
-
由 Peter Krempa 提交于
One of the functions is returning always 0 and the second one uses unnecessary labels.
-
由 Peter Krempa 提交于
qemuProcessStart does not unset the infrastructure that retrieves errors from the qemu log file in case of migration. As this wasn't handled properly in qemuDomainSaveImageStartVM we kept the logging context/fd open for the lifetime of the VM rather than closing it after it's not needed. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325080
-
由 Philipp Hahn 提交于
The configuration files are not directly executable as they don't have as hash-bang line.
-
由 Philipp Hahn 提交于
tap2 only handles 'aio', but not 'raw', which must be explicitly given: XML:raw needs to be translated to XM:aio for 'tap' and 'tap2' Xen drivers.
-
由 Philipp Hahn 提交于
tap2 only handles 'aio', but not 'raw', which must be explicitly given: | $ virsh domxml-to-native yyy.xml > yyy.xm | $ xm new yyy.xm | Error: tap:/srv/xen/xxx.img not a valid disk type | $ sed -i -e 's/tap2:/&aio:/' yyy.xm | $ xm new yyy.xm Fix reading and writing "xen-xm" format for "tap2" by handling it the same as "tap".
-
由 Jovanka Gulicoska 提交于
-
由 Jovanka Gulicoska 提交于
-
由 Jovanka Gulicoska 提交于
-
由 Peter Krempa 提交于
Note the start of migration of a qemu process to the VM log file for possible debug purposes.
-
由 Peter Krempa 提交于
Use qemuDomainLogAppendMessage rather than attempting to open a new logging context with file descriptors. The new approach allows to log the message even if qemu is still running at that point which appens during migration finish phase where qemuProcessStop is killing qemu. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1312188
-
由 Peter Krempa 提交于
Along with the virtlogd addition of the log file appending API implement a helper for logging one-shot entries to the log file including the fallback approach of using direct file access. This will be used for noting the shutdown of the qemu proces and possibly other actions such as VM migration and other critical VM lifecycle events.
-
由 Peter Krempa 提交于
Implement the RPC dispatcher and caller for the new API.
-
由 Peter Krempa 提交于
For logging one-shot entries to the VM log file it's quite a waste to hold open the file descriptor for logging that is provided by the current API. This new API will be ideal for logging one-shot entries to the file e.g. at the point when we shut the VM down rather than having to add the whole file-descriptor infrastructure. Additionally this will allow to add the messages even after restart of libvirtd since virtlogd doesn't allow to obtain a regular context with filedescriptors while the VM is still active.
-
- 07 6月, 2016 9 次提交
-
-
由 John Ferlan 提交于
Document the return value of virRandomBytes as 0 or some errno value and then make sure all callers make the proper checks.
-
由 Ján Tomko 提交于
-
由 Ján Tomko 提交于
This speeds up node_device_udev driver startup 11x.
-
由 Ján Tomko 提交于
Simplify the logic
-
由 Ján Tomko 提交于
Move out the code depending on HAVE_DECL_ETHTOOL_GFEATURES.
-
由 Ján Tomko 提交于
Split out the features that we probe via various ethtool commands and ETHTOOL_GFLAGS.
-
由 Ján Tomko 提交于
Rename struct elem to virNetDevEthtoolFeatureCmd and move it out of the function to allow reusing it.
-
由 Ján Tomko 提交于
-
由 Peter Krempa 提交于
The new flag was not added to virCheckFlags in commit '0d1c17aa' causing a regression where VMs were not able to start.
-