When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.

With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.

Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
  explicit "-cpu host" to work.

- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
  we will translate the default model to the model corresponding to the
  host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
  This is not a problem as the corresponding CPU model is in fact an
  alias for "host". This is probably not ideal, but it's not wrong and
  the default virtual CPU configured by libvirt is the same QEMU would
  use. TCG uses various CPU models depending on machine type and its
  version.

- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".

- x86_64: The default CPU model (qemu64) is not runnable on any host
  with KVM, but QEMU just disables unavailable features and starts
  happily.

https://bugzilla.redhat.com/show_bug.cgi?id=1598151
https://bugzilla.redhat.com/show_bug.cgi?id=1598162Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In preparation to moving the validation to the parser,
we need to supply the correct caps.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:

    <tpm model='tpm-tis'>
      <backend type='emulator' version='2.0'/>
    </tpm>

The swtpm process now has --tpm2 as an additional parameter:

system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8  0.0 28364  3868 ?        Rs   11:13  13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid

The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:

 <tpm model='tpm-tis'>
   <backend type='emulator'/>
 </tpm>

The XML will currently only define a TPM 1.2.

Extend the documentation.

Add a test case testing the XML parser and formatter.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:

  <tpm model='tpm-crb'>
    <backend type='passthrough'>
      <device path='/dev/tpm0'/>
    </backend>
  </tpm>

Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

There's no reason for the files to have qemuxml2xmlout- prefix
since they all live under qemuxml2xmloutdata directory.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We use the PreFormat callback for this. Many test cases need to be extended
to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.

One test case (pcie-root-port-too-many) is dropped, since it was meant
only for checking an error condition in qemuxml2argv, and one we add in
AssignAddresses it errors here too.

Long term I think AssignAddresses should be handled in qemu's PostParse
callback, but that's not entirely straightforward. Handling it here
means we can get the test suite churn over with.

Most qemuxml2xml tests expect that the input XML is unchanged after
parsing. This is unlike 99% of new qemu configs in the wild, which after
initial parsing end up with stable PCI device addresses. The xml2xml bit
doesn't currently hit that code path though, so most XML testing indeed
does not change.

Future patches will add that PCI address bits, which means most test cases
will have different output. So let's do away with the hardcoded same vs
different test split, and always track a separate output file. Tests can
still have same input and output, it just necessitates 2 separate XML files.

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.

Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>