assumptions from generic code.

This implements the minimal set of changes needed in libvirt to launch a
PowerPC-KVM based guest.
It removes x86-specific assumptions about choice of serial driver backend
from generic qemu guest commandline generation code.
It also restricts the ACPI capability to be available for an x86 or
x86_64 domain.
This is not a complete solution -- it still does not guarantee libvirt
the capability to flag non-supported options in guest XML. (Eg, an ACPI
specification in a PowerPC guest XML will still get processed, even
though qemu-system-ppc64 does not support it while qemu-system-x86_64 does.)
This drawback exists because libvirt falls back on qemu to query supported
features, and qemu '-h' blindly lists all capabilities -- irrespective
of whether they are available while emulating a given architecture or not.
The long-term solution would be for qemu to list out capabilities based
on architecture and platform -- so that libvirt can cleanly make out what
devices are supported on an arch (say 'ppc64') and platform (say, 'mac99').
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

This enables libvirt to select the correct qemu binary (qemu-system-ppc64)
for a guest vm based on arch 'ppc64'.
Also, libvirt is enabled to correctly parse the list of supported PowerPC
CPUs, generated by running 'qemu-system-ppc64 -cpu ?'
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Acked-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

 to proc/cpuinfo

This patch creates a new sysfs hierarchy under
tests/nodeinfodata/linux-nodeinfo-sysfs-test-1.
Output files and /proc/cpuinfo files are also respectively added for
both x86 and ppc64.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

 /proc/cpuinfo

Libvirt at present depends on /proc/cpuinfo to gather host
details such as CPUs, cores, threads, etc. This is an architecture-
dependent approach. An alternative is to use 'Sysfs', which provides
a platform-agnostic interface to parse host CPU topology.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

Since I have commit rights on libvirt-glib, I can also push to
libvirt, Eric Blake told to move my name up to committers to better
reflect reality.

* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: fetched localization update and regenerated

https://bugzilla.redhat.com/show_bug.cgi?id=694403 reports that
the specfile is incorrectly checking for a running libvirt-guests
service.  For example,

$ LC_ALL=es_ES chkconfig --list libvirt-guests
libvirt-guests 	  0:desactivado		 1:desactivado	   2:desactivado     3:activo	 4:activo  5:activo	    6:desactivado

will fail to find 5:on, even though it is active.  But chkconfig
already has a mode where you can silently use the exit status to
check for an active service.

* libvirt.spec.in (%post): Use simpler chkconfig options, to avoid
issues with localization.

On RHEL 5, with libxml2-2.6.26, the build failed with:
virsh.c: In function 'vshNodeIsSuperset':
virsh.c:11951: warning: implicit declaration of function 'xmlChildElementCount'

(or if warnings aren't errors, a link failure later on).

* src/util/xml.h (virXMLChildElementCount): New prototype.
* src/util/xml.c (virXMLChildElementCount): New function.
* src/libvirt_private.syms (xml.h): Export it.
* tools/virsh.c (vshNodeIsSuperset): Use it.

When one thread passes the buck to another thread, it uses
virCondSignal to wake up the target thread. The variable
'haveTheBuck' is not updated in a race-free manner when
this occurs. The current thread sets it to false, and the
woken up thread sets it to true. There is a window where
a 3rd thread can come in and grab the buck.

Even if this didn't lead to crashes & deadlocks, this would
still result in unfairness in the buckpassing algorithm.

A better solution is to *never* set haveTheBuck to false
when we're passing the buck. Only set it to false when there
is no further thread waiting for the buck.

* src/rpc/virnetclient.c: Only set haveTheBuck to false
  if no thread is waiting

Commit fd066925 tried to fix
a race condition in

  commit fa959500
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Fri Nov 11 15:28:41 2011 +0000

    Explicitly track whether the buck is held in remote client

Unfortunately there is a second race condition whereby the
event loop can trigger due to incoming data to read. Revert
this fix, so a complete fix for the problem can be cleanly
applied

* src/rpc/virnetclient.c: Revert fd066925

With security_driver set to "none" in /etc/libvirt/qemu.conf,
libvirtd would crash when attempted to attach to an existing
qemu process.  Only copy the security model if it actually exists.

It's referring to virSuspendDomain instead of
virDomainSuspend.

During virDomainDestroy, QEMU may emit SHUTDOWN event as a response to
SIGTERM and since domain object is still locked, the event is processed
after the domain is destroyed. We need to ignore this event in such case
to avoid changing domain state from shutoff to shutdown.

This patch is to expose the fabric_name of fc_host class, which
might be useful for users who wants to known which fabric the
(v)HBA connects to.

The patch also adds the missed capabilities' XML schema of scsi_host,
(of course, with fabric_wwn added), and update the documents
(docs/formatnode.html.in)

Currently if you try to connect to a local libvirtd when
libvirtd is not in $PATH, you'll get an error

  error: internal error invalid use of command API

This is because remoteFindDaemonPath() returns NULL, which
causes us to pass NULL into virNetSocketConnectUNIX which
in turn causes us to pass NULL into virCommandNewArgList.

Adding missing error checks improves this to

  error: internal error Unable to locate libvirtd daemon in $PATH

* src/remote/remote_driver.c: Report error if libvirtd
  cannot be found
* src/rpc/virnetsocket.c: Report error if caller requested
  spawning of daemon, but provided no binary path

* libvirt.spec.in (with_sanlock): On RHEL, don't force sanlock
on architectures where it isn't available.

https://bugzilla.redhat.com/show_bug.cgi?id=754909 complains that
because libvirt didn't require dmidecode, that the logs are noisy
and virConnectGetSysinfo needlessly fails.  Even 'virt-what' requires
dmidecode, so it's not that onerous of a dependency.  We may be
able to drop this in the future when we move to parsing sysfs data,
but for now, listing the dependency will help matters.

* libvirt.spec.in (Requires): Sort Requires before BuildRequires.
Add dmidecode.

Older gcc warns (on every file!) that -Wabi and -Wdeprecated only
make sense on C++ projects.  Newer gcc accepts these warnings for
C, but it is not clear that they can do anything useful, so it
is easier to just drop the warnings altogether.

* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Silence
-Wabi and -Wdeprecated on older gcc.
Reported by Peter Krempa.

The Mingw32 linker highlighted that the symbols for virtime.h
declared in libvirt_private.syms were incorrect

* src/libvirt_private.syms: Fix virtime.h symbols

When QEMU guest finishes its shutdown sequence, qemu stops virtual CPUs
and when started with -no-shutdown waits for us to kill it using
SGITERM. Since QEMU is flushing its internal buffers, some time may pass
before QEMU actually dies. We mistakenly used "paused" state (and
events) for this which is quite confusing since users may see a domain
going to pause while they expect it to shutdown. Since we already have
"shutdown" state with "the domain is being shut down" semantics, we
should use it for this state.

However, the state didn't have a corresponding event so I created one
and called its detail as VIR_DOMAIN_EVENT_SHUTDOWN_FINISHED (guest OS
finished its shutdown sequence) with the intent to add
VIR_DOMAIN_EVENT_SHUTDOWN_STARTED in the future if we have a
sufficiently capable guest agent that can notify us when guest OS starts
to shutdown.

Otherwise connections to older libvirt abort with:

$ virsh -c qemu+ssh://host.example.com/system list
error: invalid connection pointer in virDrvSupportsFeature
error: failed to connect to the hypervisor

Tested against 0.8.3 and 0.9.8-rc2.

This patch adds binding for virNodeGetMemoryStats method of libvirtd.
Return value is represented as a python dictionary mapping field
names to values.

This patch adds binding for virNodeGetCPUStats method of libvirtd.
Return value is represented as a python dictionary mapping field names
to values.

https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').

* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.

We want our tarballs to be complete - this means that any
generated file that gets shipped as part of the tarball so that
ordinary users don't have to rebuild it must be something
that the maintainer can generate.  There have been various
reports of random build failures when using libvirt.git
instead of a tarball, and often it is due to missing a
maintainer-specific tool to produce one of these generated
files.  This patch raises the bar for what you must have
installed to build libvirt.git, but does not impact what
you can get away with for building tarballs.

Note: It still remains possible to do a successful 'make dist'
without these tools, when starting from a release tarball.

* bootstrap.conf (buildreq): Add tools that maintainers need for a
successful 'make dist' from a fresh git checkout.

virBufferContentAndReset (intentionally) returns NULL for a buffer
with no content, but it is feasible to invoke a command with an
explicit empty string.

* src/util/command.c (virCommandAddEnvBuffer): Reject empty string.
(virCommandAddArgBuffer): Allow explicit empty argument.
* tests/commandtest.c (test9): Test it.
* tests/commanddata/test9.log: Adjust.

The RPC fixups needed on Linux are also needed on cygwin, and
worked without further tweaking to the list of fixups.  Also,
unlike BSD, Cygwin exports 'struct ifreq', but unlike Linux,
Cygwin lacks the ioctls that we were using 'struct ifreq' to
access.  This patch allows compilation under cygwin.

* src/rpc/genprotocol.pl: Also perform fixups on cygwin.
* src/util/virnetdev.c (HAVE_STRUCT_IFREQ): Also require AF_PACKET
definition.
* src/util/virnetdevbridge.c (virNetDevSetupControlFull): Only
compile if SIOCBRADDBR works.

I had previously tested commit 059d746d with -O intentionally omitted
from my CFLAGS; but that means that I missed out on this warning
from gcc 4.6.2 when optimizations are enabled:

util/buf.c: In function 'virBufferGetIndent':
util/buf.c:86:1: error: function might be candidate for attribute 'pure' [-Werror=suggest-attribute=pure]

While it is probably a good idea to add the attributes and silence
this warning, it's also invasive; 'make -k' found more than 75 such
complaints.  And it doesn't help that gcc 4.6.2 is still buggy
(coreutils reported a case where gcc 4.6.2 incorrectly suggested
marking a function pure that incremented a global variable; fixed
in gcc 4.7).  So the best fix for now is to disable the warning.

It also doesn't help that I stumbled across another problem - gcc
documents that -Wsuggest-attribute=pure only warns if you use -O,
or if you use -fipa-pure-const.  But in practice, when I omitted -O
but added -fipa-pure-const, the warnings are fickle - I got warnings
for simple compilation that disappeared when I also added -fPIC.
And the way libtool compiles things is with -fPIC first, then without
-fPIC but with errors sent to /dev/null - which meant that without
disabling -Wsuggest-attribute=pure, I got a compile error with no
message.  :(  See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=10197

* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Silence
-Wsuggest-attribute warnings for now.

The pathname for the pipe for tunnelled migration is unresolvable.  The
libvirt apparmor driver therefore refuses access, causing migration to
fail.  If we can't resolve the path, the worst that can happen is that
we should have given permission to the file but didn't.  Otherwise
(especially since this is a /proc/$$/fd/N file) the file is already open
and libvirt won't be refused access by apparmor anyway.

Also adjust virt-aa-helper to allow access to the
*.tunnelmigrate.dest.name files.

For more information, see https://launchpad.net/bugs/869553.
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>

Originaly, the code checked if another client is the queue and infered
ownership of the buck from that. Commit fa959500
added a separate variable to track the buck. That caused, that a new
call might enter claiming it has the buck, while another thread was
signalled to take the buck. This ends in two threads claiming they hold
the buck and entering poll(). This happens due to a race on waking up
threads on the client lock mutex.

This caused multi-threaded clients to hang, most prominently visible and
reproducible on python based clients, like virt-manager.

This patch causes threads, that have been signalled to take the buck to
re-check if buck is held by another thread.

With fragments borrowed from David Steven's previous submission and some
further modifications:

A set of modifications to filters to handle multiple IP addresses
(and MAC addresses) per interface.

Also:
- enable DHCP traffic from VM to any DHCP server
- will require an update to a libvirt-tck data file
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Reported by kato.tomoyuki@jp.fujitsu.com at
https://bugzilla.redhat.com/show_bug.cgi?id=749564

* tools/virsh.c (info_network_info): Mark string for translation.

Many of these were mentioned by Yuri Chornoivan in:
https://bugzilla.redhat.com/show_bug.cgi?id=669506

* src/esx/esx_vi.c (esxVI_WaitForTaskCompletion): Fix spelling.
* src/conf/netdev_vport_profile_conf.c
(virNetDevVPortProfileParse): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags):
Likewise.
* src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): Likewise.
* src/esx/esx_util.c (esxUtil_ResolveHostname): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemBuild): Likewise.
* daemon/libvirtd.conf: Likewise.
* src/util/logging.c (virLogMessage): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineNet): Likewise.
* src/vmx/vmx.c (virVMXFormatEthernet): Likewise.

* .gnulib: Update to latest, for improved 'make syntax-check' and
compiler warnings.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS):
Re-silence -Wformat-nonliteral.
* cfg.mk (_test_script_regex): Recognize our test scripts.
* gnulib/local/lib/*.diff: Drop, now that gnulib has this.
* tests/virsh-optparse: Fix use of compare.
* tests/virsh-schedinfo: Likewise.

I got this failure on FreeBSD:

shunloadtest.c: In function 'main':
shunloadtest.c:150: error: 'EXIT_AM_SKIP' undeclared (first use in this function)

but inspection showed several other problems, all fixed here.

* tests/domainsnapshotxml2xmltest.c [!WITH_QEMU]: Ensure
EXIT_AM_SKIP is defined.
* tests/esxutilstest.c [!WITH_ESX]: Likewise.
* tests/openvzutilstest.c [!WITH_OPENVZ]: Likewise.
* tests/qemuargv2xmltest.c [!WITH_QEMU]: Likewise.
* tests/qemuhelptest.c [!WITH_QEMU]: Likewise.
* tests/qemuxml2argvtest.c [!WITH_QEMU]: Likewise.
* tests/qemuxml2xmltest.c [!WITH_QEMU]: Likewise.
* tests/qemuxmlnstest.c [!WITH_QEMU]: Likewise.
* tests/shunloadtest.c [!linux]: Likewise.
* tests/vmx2xmltest.c [!WITH_VMX]: Likewise.
* tests/xml2vmxtest.c [!WITH_VMX]: Likewise.

For unknown reasons, the shunloadtest will crash on Fedora 16
inside dlopen()

 (gdb) bt
 #0  0x00000000000050e6 in ?? ()
 #1  0x00007ff61a77b9d5 in floor () from /lib64/libm.so.6
 #2  0x00007ff61e522963 in _dl_relocate_object () from /lib64/ld-linux-x86-64.so.2
 #3  0x00007ff61e5297e6 in dl_open_worker () from /lib64/ld-linux-x86-64.so.2
 #4  0x00007ff61e525006 in _dl_catch_error () from /lib64/ld-linux-x86-64.so.2
 #5  0x00007ff61e52917a in _dl_open () from /lib64/ld-linux-x86-64.so.2
 #6  0x00007ff61e0f6f26 in dlopen_doit () from /lib64/libdl.so.2
 #7  0x00007ff61e525006 in _dl_catch_error () from /lib64/ld-linux-x86-64.so.2
 #8  0x00007ff61e0f752f in _dlerror_run () from /lib64/libdl.so.2
 #9  0x00007ff61e0f6fc1 in dlopen@@GLIBC_2.2.5 () from /lib64/libdl.so.2
 #10 0x0000000000400a15 in main (argc=<optimized out>, argv=<optimized out>) at shunloadtest.c:105

Changing from RTLD_NOW to RTLD_LAZY avoids this problem,
but quite possibly does not fix the root cause.

* shunloadtest.c: s/NOW/LAZY/