The file object is needed when formatting the command line, but it makes
nesting of the objects less easy for use with blockdev. Separate the
wrapping into the 'file' object into a helper used specifically for disk
sources in the old code path.

Move qemuFreeKeywords into qemu_parse_command.c as
qemuParseKeywordsFree and call it rather than inline code
in multiple places.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

The original description from commit id '24e0171b' got it backwards.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Without the fix in the previous patch the JSON data from QEMU would be
interpreted as Haswell-noTSX because x86DataFilterTSX would filter rtm
and hle features as a result of

    family == 6 && model == 63 && stepping < 4

test even though this CPU has stepping == 4.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Even though only family and model are used for matching CPUID data with
CPU models from cpu_map.xml, stepping is used by x86DataFilterTSX which
is supposed to disable TSX on CPU models with broken TSX support. Thus
we need to start parsing stepping from QEMU to make sure we don't
disable TSX on CPUs which provide working TSX implementation. See the
following patch for a real world example of such CPU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.

When libvirt older than 3.9.0 reconnected to a running domain started by
old libvirt it could have messed up the expansion of host-model by
adding features QEMU does not support (such as cmt). Thus whenever we
reconnect to a running domain, revert to an active snapshot, or restore
a saved domain we need to check the guest CPU model and remove the
CPU features unknown to QEMU. We can do this because we know the domain
was successfully started, which means the CPU did not contain the
features when libvirt started the domain.

https://bugzilla.redhat.com/show_bug.cgi?id=1495171Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

When reconnecting to a domain started with a host-model CPU which was
started by old libvirt that did not replace host-model with the real CPU
definition, libvirt replaces the host-model CPU with the CPU from
capabilities (because this is what the old libvirt did when it started
the domain). Without this patch libvirt could use features unknown to
QEMU in the CPU definition which replaced the original host-model CPU.
Such domain would keep running just fine, but any attempt to migrate it
will fail and once the domain is saved or snapshotted, restoring it
would fail too.

In other words whenever we want to use the CPU definition from host
capabilities as a guest CPU definition, we have to filter the unknown
features.

https://bugzilla.redhat.com/show_bug.cgi?id=1495171Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

The new function is called qemuProcessRefreshCPU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Commit e371b3bf changed all the links to libvirt.org to use https.
Remove the leftover 'http' links from downloads page, since they
point to https anyway.

Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.

The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.

Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.

Adding these functions creates a central points for further refactors.

Set the type so that the iterators will work after upcoming
modification.

Storage driver uses virStorageSource only partially to store it's
configuration but fully when parsing backing files of storage volumes.
This patch sets the 'type' field to a value other than
VIR_STORAGE_TYPE_NONE so that further patches can add a terminator
element to backing chains without breaking iteration.

chain->path may be NULL e.g. for NBD drives, so the check needs to avoid
dereferencing the path in such case

We can now use the backing store ID directly rather than counting the
number of images seen while looking up images.

The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.

Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.

Index will remain an internal property even if we allow backing store
parsing from the XML, so we need to allow backing store without it in
the schema.

Use VIR_STEAL_PTR to remove conditional cleanup.

Existing qemuParseCommandLineMem() will parse "-m 4G" format string.
This patch allows it to parse "-m size=8126464k,slots=32,maxmem=33554432k"
format along with existing format. And adds a testcase to validate the changes.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

Hyper-V uses its own specific memory management so no mapping is going to
be perfect. However, it is more correct to map Limit to max_memory (it
really is the upper limit of what the VM may potentially use) and keep
cur_balloon equal to total_memory.

The typical value returned from Hyper-V in Limit is 1 TiB, which is not
really going to work if interpreted as "startup memory" to be ballooned
away later.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>

The code was vulnerable to SQL injection. Likely not a security issue due to
WMI SQL and other constraints but still lame. For example:

  virsh # dominfo \"
  error: failed to get domain '"'
  error: internal error: SOAP fault during enumeration: code 's:Sender', subcode
  'n:CannotProcessFilter', reason 'The data source could not process the filter.
  The filter might be missing or it might be invalid. Change the filter and try
  the request again.  ', detail 'The WS-Management service cannot process the
  request. The WQL query is invalid. '

This commit fixes the Hyper-V driver by escaping all WMI SQL string parameters.

The same command with the fix:

  virsh # dominfo \"
  error: failed to get domain '"'
  error: Domain not found: No domain with name "
Signed-off-by: NLadi Prosek <lprosek@redhat.com>

"%s is not a Hyper-V server" is not a correct generalization of all possible
error conditions of hypervEnumAndPull. For example:

  $ virsh --connect hyperv://localhost/?transport=http
  Enter username for localhost [administrator]:
  Enter administrator's password for localhost: <enters incorrect password>
  error: failed to connect to the hypervisor
  error: internal error: localhost is not a Hyper-V server

This commit removes the general virReportError from hypervInitConnection and
also the "Invalid query" virReportError from hypervSerializeEprParam, which
does not correctly describe the error either (virBufferCheckError has
already set a meaningful error message at that point).

The same scenario with the fix:

  $ virsh --connect hyperv://localhost/?transport=http
  Enter username for localhost [administrator]:
  Enter administrator's password for localhost: <enters incorrect password>
  error: failed to connect to the hypervisor
  error: internal error: Transport error during enumeration: User, password or
  similar was not accepted (26)
Signed-off-by: NLadi Prosek <lprosek@redhat.com>

The default_tls_x509_verify (and related) parameters in qemu.conf
control whether the QEMU TLS servers request & verify certificates
from clients. This works as a simple access control system for
servers by requiring the CA to issue certs to permitted clients.
This use of client certificates is disabled by default, since it
requires extra work to issue client certificates.

Unfortunately the code was using this configuration parameter when
setting up both TLS clients and servers in QEMU. The result was that
TLS clients for character devices and disk devices had verification
turned off, meaning they would ignore errors while validating the
server certificate.

This allows for trivial MITM attacks between client and server,
as any certificate returned by the attacker will be accepted by
the client.

This is assigned CVE-2017-1000256  / LSN-2017-0002
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This adds a rule to require https links for the libvirt, qemu
and kvm websites.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We stopped autogenerating a TODO file from RFE bugs a long time
ago.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Somewhere around commit 9ff9d9f5 reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc20142.

Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge

https://bugzilla.redhat.com/show_bug.cgi?id=1460143

xsaveopt is artificially removed from the host to test disabled feature
which is only included in QEMU's version of the CPU model.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

arat is now enabled even if the hardware does not support it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

xsaves is supported by current QEMU/KVM on this CPU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This CPU was incorrectly detected as SandyBridge before because the
number of additional <feature> elements was the same for both
SandyBridge and Westmere CPU models, but SandyBridge is newer (the CPU
signature does not help here because it doesn't match any signature
defined in cpu_map.xml). But since QEMU's version of SandyBridge CPU
model contains xsaveopt which needs to be disabled, Westmere becomes the
best CPU model when translating CPUID data to virCPUDef. Unfortunately,
this doesn't help with translating the data we got from QEMU and the CPU
model is still computed as SandyBridge in this case.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The unavailable features do not make any difference in this case,
because this is a SandyBridge CPU which has an empty list of unavailable
features.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When testing cpuDecode for computing guest CPU definition from CPUID
data (the CPU definition reported by domain capabilities), we need to
use CPU models (and their usability blockers) from QEMU if they are
available to cpuDecode in the same way it is actually used in the qemu
driver.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>