Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Some compilers may get confused and decide we are calling strcmp with
NULL argument from test_virCapsDomainDataLookupLXC. Although this does
not really happen since the call is guarded with
(data->machinetype != expect_machinetype), using STRNEQ_NULLABLE is
easier to understand, less fragile, and doing so makes sure strcmp is
never called with NULL argument.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add two new entries under new features for 3.10.0. One
advertising support for specifying distance between vNUMA cells
and another advertising Xen's support for vNUMA configuration.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Reword the message and drop the numbers (which were reversed) from it
so that it actually makes sense.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509151

Setup everything related to disks in one place rather than calling in
from various places.

The change to ordering of the setup steps is necessary since secrets
need the master key to be present.

In some cases it does not make sense to pursue that the private data
will be allocated (especially when we don't need to put anything in it).

Ensure that the code works without it.

This also fixes few crashes pointed out in
https://bugzilla.redhat.com/show_bug.cgi?id=1510323

Use virDomainDiskDefNew instead of VIR_ALLOC in
qemuParseCommandLineDisk.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1510781

If creation of the main JSON object containing the storage portion of a
virStorageSource would fail but we'd allocate the server structure we'd
leak it. Found by coverity.

Return NULL right away in qemuBlockStorageSourceGetBackendProps when an
invalid storage source is presented so that virJSONValueObjectAdd isn't
called with a NULL argument.

Found by coverity.

The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.

Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba. Fix them properly now.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110

https://bugzilla.redhat.com/show_bug.cgi?id=1497410

This reverts commit bc8a99ef.

The vhostuser is not a TAP. Therefore our QoS code is not able to
set any bandwidth. I don't really understand what I was thinking.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add tests to ensure the libxl_domain_config generator properly
handles vNUMA configuration.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add tests for conversion of domXML vNUMA config to/from
xen-xl native vNUMA config.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch generates a NUMA distance-aware libxl description from the
information extracted from a NUMA distance-aware libvirt XML file.

By default, if no NUMA node distance information is supplied in the
libvirt XML file, this patch uses the distances 10 for local and 20
for remote nodes/sockets.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch converts NUMA configurations between the Xen libxl
configuration file format and libvirt's XML format.

XML HVM domain on a 4 node (2 cores/socket) configuration:

  <cpu>
    <numa>
      <cell id='0' cpus='0-1' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='10'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='31'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='1' cpus='2-3' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='10'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='31'/>
        </distances>
      </cell>
      <cell id='2' cpus='3-4' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='31'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='10'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='3' cpus='5-6' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='31'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='10'/>
        </distances>
      </cell>
    </numa>
  </cpu>

Xen xl.cfg domain configuration:

  vnuma = [["pnode=0","size=2048","vcpus=0-1","vdistances=10,21,31,21"],
           ["pnode=1","size=2048","vcpus=2-3","vdistances=21,10,21,31"],
           ["pnode=2","size=2048","vcpus=4-5","vdistances=31,21,10,21"],
           ["pnode=3","size=2048","vcpus=6-7","vdistances=21,31,21,10"]]

If there is no XML <distances> description amongst the <cell> data the
conversion schema from xml to native will generate 10 for local and 20
for all remote instances.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.

Below is an example of a 4 node setup:

  <cpu>
    <numa>
      <cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='10'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='31'/>
          <sibling id='3' value='21'/>
        </distances>
      </cell>
      <cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='10'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='31'/>
        </distances>
      </cell>
      <cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='31'/>
          <sibling id='1' value='21'/>
          <sibling id='2' value='10'/>
          <sibling id='3' value='21'/>
        </distances>
      <cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
        <distances>
          <sibling id='0' value='21'/>
          <sibling id='1' value='31'/>
          <sibling id='2' value='21'/>
          <sibling id='3' value='10'/>
        </distances>
      </cell>
    </numa>
  </cpu>

A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s).  For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.

Valid distance values are '10 <= value <= 255'.  A distance value of 10
represents the distance to the node itself.  A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.

When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.

If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

To avoid the chance that the loop is run twice, set the neventCallbacks
to zero after VIR_FREE(eventCallbacks) was called.

Since colors would be used when writing to stdout, then check that
stdout is a TTY, instead of stdin.

This avoids the usage of terminal color codes when the output is
directed to file.

https://bugzilla.redhat.com/show_bug.cgi?id=1434451

When testing user aliases it was discovered that for 440fx
machine type which has default IDE bus builtin, domain cannot
start if IDE controller has the user provided alias. This is
because for 440fx we don't put the IDE controller onto the
command line (since it is builtin) and therefore any device that
is plugged onto the bus must use the default alias.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libvirt reports a fake NUMA topology in virConnectGetCapabilities
even if built without numactl support. The fake NUMA topology consists
of a single cell representing the host's cpu and memory resources.
Currently this is the case for ARM and s390[x] RPM builds.

A client iterating over NUMA cells obtained via virConnectGetCapabilities
and invoking virNodeGetMemoryStats on them will see an internal failure
"NUMA isn't available on this host" from virNumaGetMaxNode. An example
for such a client is VDSM.

Since the intention seems to be that libvirt always reports at least
a single cell it is necessary to return "fake" node memory statistics
matching the previously reported fake cell in case NUMA isn't supported
on the system.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Simply add the 5.2 SDK header to the existing unified framework. No
other special handling is needed as there's no API break between
existing 5.1 and the just added 5.2.

Extracted from 5.2 SDK and reindented with cppi

There was a recent report of the xen-xl converter not handling
config files missing an ending newline

https://www.redhat.com/archives/libvir-list/2017-October/msg01353.html

Commit 3cc2a9e0 fixed a similar problem when parsing content of a
file but missed parsing in-memory content. But AFAICT, the better
fix is to properly set the end of the content when initializing the
virConfParserCtxt in virConfParse().

This commit reverts the part of 3cc2a9e0 that appends a newline to
files missing it, and fixes setting the end of content when
initializing virConfParserCtxt. A test is also added to check
parsing in-memory content missing an ending newline.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Use bool instead of an int.

In 4f157072 I've tried to make duplicates detection for
nested /dev mount better. However, I've missed the obvious case
when there are two same mount points. For instance if:

  # mount --bind /dev/blah /dev/blah
  # mount --bind /dev/blah /dev/blah

Yeah, very unlikely (in qemu driver world) but possible.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Split on the last colon and avoid parsing port if the split remainder
contains the closing square bracket, so that IPv6 addresses are
interpreted correctly.

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The architecture itself is called ppc64, and it can run both in big
endian and little endian mode - the latter is known as ppc64le.

From the (virtual) hardware point of view, ppc64 is a more accurate
name so it should be used here.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

In some cases management application needs to allocate memory for
qemu upfront and then just let qemu use that. Since we don't want
to expose path for memory-backend-file anywhere in the domain
XML, we can generate predictable paths. In this case:

  $memoryBackingDir/libvirt/qemu/$shortName/$alias

where $shortName is result of virDomainDefGetShortName().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When removing path where huge pages are call virFileDeleteTree
instead of plain rmdir(). The reason is that in the near future
there's going to be more in the path than just files - some
subdirs. Therefore plain rmdir() is not going to be enough.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

At the same time, move its internals into a separate function so
that they can be reused.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Very soon qemuBuildMemoryBackendStr() is going to use memory cell
aliases. Therefore set one. At the same time, move it a bit
further - if virAsprintf() fails, there's no point in setting
rest of the members.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>