Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Per the documentation, is_selinux_enabled() returns -1 on error.
Account for this. Previously when -1 was being returned the condition
would still be true. I was noticing this because on my system that has
selinux disabled I was getting this in the libvirt.log every 5
seconds:

error : virIdentityGetSystem:173 : Unable to lookup SELinux process context: Invalid argument

With this patch applied, I no longer get these messages every 5
seconds. I am submitting this in case its deemed useful for inclusion.
Anyone have any comments on this change? This is a patch off current
master.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

New functionalities:
- connectGetMaxVcpus - on bhyve hardcode this value to 16
- nodeGetFreeMemory - do not use physmem_get on FreeBSD, since
                      it might get wrong value on systems with
                      more than 100GB of RAM
- nodeGetCPUMap - wrapper only for mapping function, currently not
                  supported by FreeBSD
- nodeSet/GetMemoryParameters - wrapper only for future improvements,
                                currently not supported by FreeBSD

The virSocketAddrMask method did not initialize all fields
in the sockaddr_in6 struct. In paticular the 'sin6_scope_id'
field could contain random garbage, which would in turn
affect the result of any later virSocketAddrFormat calls.
This led to ip6tables rules in the FORWARD chain which
matched on random garbage sin6_scope_id. Fortunately these
were ACCEPT rules, so the impact was merely that desired
traffic was blocked, rather than undesired traffic allowed.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Valgrind reported leaking of maxCpus and arch strings from
virXPathString, as well as the leak of the machineMaxCpus array.

Don't use 'str' for the strings we don't want to free, to allow
freeing of 'str' in the cleanup label and free machineMaxCpus
in virCapsReset too.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Move the domain event handler and shutdown thread out of the main
driver module and into libxl_domain module
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Include a pointer to the libxl driver in libxlDomainObjPrivate
object so it can be used in the domain event handler and
shutdown thread.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlVmStart from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainStart.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainSetVcpuAffinities from libxl_driver to libxl_domain
for use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules.  For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainAutoCoreDump from libxl_driver to libxl_domain
for use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules.  For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules.  For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainManagedSavePath from libxl_driver to libxl_domain
for use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move libxlDomainEventQueue from libxl_driver to libxl_domain for
use by other libxl modules.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Currently, we use pthread_sigmask(SIG_BLOCK, ...) prior to calling
poll(). This is okay, as we don't want poll() to be interrupted.
However, then - immediately as we fall out from the poll() - we try to
restore the original sigmask - again using SIG_BLOCK. But as the man
page says, SIG_BLOCK adds signals to the signal mask:

SIG_BLOCK
      The set of blocked signals is the union of the current set and the set argument.

Therefore, when restoring the original mask, we need to completely
overwrite the one we set earlier and hence we should be using:

SIG_SETMASK
      The set of blocked signals is set to the argument set.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1071181

Commit 49b59a15 fixed one problem but masks another one related to pointer
freeing.

Avoid putting of the virNWFilterSnoopReq once the thread has been started.
It belongs to the thread and the thread will call virNWFilterSnoopReqPut() on it.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

s/of value/value of/
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Before refactoring this struct, I found it helpful to track which
'int' fields really contain an enum value.

* src/conf/domain_conf.h (_virDomainDiskDef): Add comments.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

While running qemuhotplugtest, it was found that valgrind pointed out
the following memory leak:

==7906== 5 bytes in 1 blocks are definitely lost in loss record 7 of 121
==7906==    at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==7906==    by 0x3E782A754D: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==7906==    by 0x4CDAE03: virDomainDeviceInfoParseXML.isra.32 (domain_conf.c:3685)
==7906==    by 0x4CE3BB9: virDomainNetDefParseXML (domain_conf.c:6707)
==7906==    by 0x4CFBA08: virDomainDefParseXML (domain_conf.c:12235)
==7906==    by 0x4CFBC1E: virDomainDefParseNode (domain_conf.c:13039)
==7906==    by 0x4CFBD95: virDomainDefParse (domain_conf.c:12981)
==7906==    by 0x41FEB4: testQemuHotplug (qemuhotplugtest.c:66)
==7906==    by 0x420F41: virtTestRun (testutils.c:201)
==7906==    by 0x41F287: mymain (qemuhotplugtest.c:422)
==7906==    by 0x4216BD: virtTestMain (testutils.c:784)
==7906==    by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
...and 10 more.

Problem is, since 20745748 we do both, parse <alias/> elements from
XML files and call qemuAssignDeviceAliases(). While generating runtime
info for domain at runtime is just fine in the test, we can parse just
inactive XML and remove all <alias/>-es from the XML files.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I forgot to delete the underscore in object_locking_SOURCES when
changing the name in one of previous cleanups.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Ancient automake (such as from RHEL5) does not provide abs_srcdir and
abs_builddir variables which are used by a recent commit of mine
(e562e82f).
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

To allow for fault injection of the virCommand dry run,
add the ability to register a callback. The callback will
be passed the argv, env and stdin buffer and is expected
to return the exit status and optionally fill stdout and
stderr buffers.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The CMD_STOPONERR macro uses its parameter as a boolean, so should
be passed true rather than 1.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>