- 15 8月, 2014 9 次提交
-
-
由 Kiarie Kahurani 提交于
introduce functions xenFormatXMEmulator(virConfPtr conf,........); xenFormatXMCDROM(virConfPtr conf, .......); xenFormatXMOS(virConfPtr conf,........); which formats OS and associated config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
introduce functions xenFormatXMCPUAllocation(virConfPtr conf, ......); xenFormatXMCPUFeatures(virConfPtr conf, ......); which formats CPU allocation and features config Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
introduce function xenFormatXMDisks(virConfPtr conf,.........); which formats domain disks config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
introduce function xenFormatXMCharDev(virConfPtr conf,........); which formats Char devices config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
introduce function xenFormatXMEventActions(virConfPtr conf,.........); which formats event actions instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-
由 Kiarie Kahurani 提交于
introduce function xenFormatXMTimeOffset(virConfPtr conf,........); which formats time config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
introduce function xenFormatXMMem(virConfPtr conf,...........); which parses memory config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-
由 Kiarie Kahurani 提交于
introduce function xenFormatXMGeneralMeta(virConfPtr conf,......); which parses uuid and name instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 14 8月, 2014 7 次提交
-
-
由 Jianwei Hu 提交于
The correct vlanid range is 0~4095. After merging this patch, we can not validate a interface xml with vlanid >= 4096. [root@localhost ~]# cat vlan.xml <interface type='vlan' name='eno1.4096'> <start mode='onboot'/> <protocol family='ipv4'> <dhcp/> </protocol> <vlan tag='4096'> <interface name='eno1'/> </vlan> </interface> [root@localhost ~]# virt-xml-validate vlan.xml vlan.xml:1: element interface: Relax-NG validity error : Invalid sequence in interleave vlan.xml:6: element vlan: Relax-NG validity error : Element interface failed to validate content vlan.xml:6: element vlan: Relax-NG validity error : Element vlan failed to validate attributes vlan.xml fails to validate [root@localhost ~]# Here is a ip command help on this. [root@localhost /]# ip link add link eno1 name eno1.90 type vlan help Usage: ... vlan [ protocol VLANPROTO ] id VLANID [ FLAG-LIST ] [ ingress-qos-map QOS-MAP ] [ egress-qos-map QOS-MAP ] VLANPROTO: [ 802.1Q / 802.1ad ] VLANID := 0-4095 FLAG-LIST := [ FLAG-LIST ] FLAG FLAG := [ reorder_hdr { on | off } ] [ gvrp { on | off } ] [ mvrp { on | off } ] [ loose_binding { on | off } ] QOS-MAP := [ QOS-MAP ] QOS-MAPPING QOS-MAPPING := FROM:TO
-
由 Richard Weinberger 提交于
The gid value passed to devpts has to be translated by hand as virLXCControllerSetupDevPTS() is called before setting up the user and group mappings. Otherwise devpts will use an unmapped gid and openpty() will fail within containers. Linux kernel commit 23adbe12 ("fs,userns: Change inode_capable to capable_wrt_inode_uidgid") uncovered that issue. Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Jianwei Hu 提交于
Should like below: <interface type='server'> <mac address='52:54:00:22:c9:42'/> <source address='192.168.0.1' port='5558'/> </interface> ... <interface type='client'> <mac address='52:54:00:8b:c9:51'/> <source address='192.168.0.1' port='5558'/> </interface>
-
由 Sam Bobroff 提交于
During a QEMU live migration several warning messages about job handling could be written to syslog on the destination host: "entering monitor without asking for a nested job is dangerous" The messages are written because the job handling during migration uses hard coded asyncJob values in several places that are incorrect. This patch passes the required asyncJob value around and prevents the warnings as well as any issues that the warnings may be referring to. https://bugzilla.redhat.com/show_bug.cgi?id=1130089Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Jincheng Miao 提交于
Perl is necessary to our build processing, it will invoke a lot of generating script, like: gendispatch.pl. If perl is missing, it's ok for build from git checkout, because autogen.sh will tell you. But for compiling from a release tarball, configure will just record a missing message, and continue, then build failed, like: https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html So need to enhance configure script to handle this negative case. Reported-by: NHongbin Lu <hongbin@savinetwork.ca> Signed-off-by: NJincheng Miao <jmiao@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Mo yuxiang 提交于
commit d9504941 introduces two new attributes "cmd_per_lun" and "max_sectors" same with the names QEMU uses for virtio-scsi. But the case of parsing them is not exact. Change to parse them if controller has "driver" element. Signed-off-by: NMo yuxiang <moyuxiang@huawei.com>
-
由 Chen Hanxiao 提交于
This patch changes the setmaxmem function to support the '--live', '--config', and '--current' flags by revectoring the code through the setmem function using the VIR_DOMAIN_MEM_MAXIMUM flag. The setmem code is refactored to handle both cases depending on the flag. The changed maxmem code for the MEM_MAXIMUM path will not allow modification to the memory values of an active guest unless the --config switch is used. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 13 8月, 2014 4 次提交
-
-
由 Peter Krempa 提交于
Libvirt is really chatty when the DEBUG log level is enabled. When a host uses journald we'd enable debug logging to journald when only specifying the debug log level. As journald may employ rate throttling this would lock up the daemon until it's able to flush all debug messages. This patch changes the default log level to VIR_LOG_INFO when using the default (unconfigured) log output to journald. To still allow debug logging to journald the user now has to explicitly specify journald as a log output with priority 1 in the "log_outputs" configuration option. This patch also changes the config file template to be explicit about this change and notify the user about the possible consequence of debug logging into journald. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955
-
由 Peter Krempa 提交于
Our docs didn't mention the explicit option to log into journald.
-
由 Eric Blake 提交于
Laine Stump noted on IRC that syntax check wasn't flagging his typo of 'i= 0'. This fixes it. * build-aux/bracket-spacing.pl: Tighten 'space around =' rule. * src/storage/storage_backend.c (virStorageBackendCreateExecCommand): Fix offenders. * src/util/virnuma.c (virNumaGetDistances): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotDeleteMetadataOnly) (vboxNetworkGetXMLDesc): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainLookupByName): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Dmitry Guryanov 提交于
If we failed to create BHYVE_STATE_DIR, we should show this path, not BHYVE_LOG_DIR.
-
- 12 8月, 2014 13 次提交
-
-
由 Michal Privoznik 提交于
At the beginning of the qemu config file parsing function there are 3 helper macros defined: GET_VALUE_BOOL, GET_VALUE_LONG and GET_VALUE_STR. Later, when they are no longer needed they are undefined in order to keep the namespace clean. However, the GET_VALUE_STRING is undefined instead of GET_VALUE_STR. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Roman Bogorodskiy 提交于
Implement ZFS storage backend driver. Currently supported only on FreeBSD because of ZFS limitations on Linux. Features supported: - pool-start, pool-stop - pool-info - vol-list - vol-create / vol-delete Pool definition looks like that: <pool type='zfs'> <name>myzfspool</name> <source> <name>actualpoolname</name> </source> </pool> The 'actualpoolname' value is a name of the pool on the system, such as shown by 'zpool list' command. Target makes no sense here because volumes path is always /dev/zvol/$poolname/$volname. User has to create a pool on his own, this driver doesn't support pool creation currently. A volume could be used with Qemu by adding an entry like this: <disk type='volume' device='disk'> <driver name='qemu' type='raw'/> <source pool='myzfspool' volume='vol5'/> <target dev='hdc' bus='ide'/> </disk>
-
由 Peter Krempa 提交于
In qemuMigrationToFile we enter the monitor multiple times and don't check if the VM is still alive after returning form the monitor. Add the checks to skip pieces of code in case the VM crashes while saving it's state.
-
由 Peter Krempa 提交于
Saving a shutoff VM doesn't make sense and libvirtd crashes while attempting to do that. Check that the domain is alive after entering the save async job. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129207
-
由 Peter Krempa 提交于
Fix header alignment and remove the unused conn parameter.
-
由 Erik Skultety 提交于
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1121837
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1128751 There's this <driver/> element under <interface/> which can have several attributes. However, the driver element is currently formated only if the driver's name or txmode has been specified. This makes only a little sense as we parse even partial <driver/>, for instance: <interface type='user'> <mac address='52:54:00:e5:48:58'/> <model type='virtio'/> <driver ioeventfd='on' event_idx='on' queues='5'/> </interface> But such XML would never get formatted back. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Eric Blake 提交于
Commit 4cf53158 tried to set up unique labels per disk in the example, but ended up choosing strings that don't correspond to the usual choice of bus types. Tweak the strings once again. * docs/formatdomain.html.in: Use preferred names. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Laine Stump 提交于
When a network is defined with "<pf dev='xyz'/>", libvirt will query sysfs to learn the list of all virtual functions (VF) associated with that Physical Function (PF) then populate the network's interface pool accordingly. This action was previously done only when the first guest actually requested an interface from the network. This patch changes it to populate the pool immediately when the network is started. This way any problems with the PF or its VFs will become apparent sooner. Note that we can't remove the old calls to networkCreateInterfacePool that happen whenever a guest requests an interface - doing so would be asking for failures on hosts that had libvirt upgraded with a network that had been started but not yet used. This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1047818
-
由 Laine Stump 提交于
networkCreateInterfacePool was a bit loose in its error cleanup, which could result in a network definition with interfaces in the pool that were NULL. This would in turn lead to a libvirtd crash when a guest tried to attach an interface using the network with that pool. In particular this would happen when creating a pool to be used for macvtap connections. macvtap needs the netdev name of the virtual function in order to use it, and each VF only has a netdev name if it is currently bound to a network driver. If one of the VFs of a PF happened to be bound to the pci-stub or vfio-pci driver (indicating it's already in use for PCI passthrough), or no driver at all, it would have no name. In this case networkCreateInterfacePool would return an error, but would leave the netdef->forward.nifs set to the total number of VFs in the PF. The interface attach that triggered calling of networkCreateInterfacePool (it uses a "lazy fill" strategy) would simply fail, but the very next attempt to attach an interface using the same network pool would result in a crash. This patch refactors networkCreateInterfacePool to bring it more in line with current coding practices (label name, use of a switch with no default case) as well as providing the following two changes to behavior: 1) If a VF with no netdev name is encountered, just log a warning and continue; only fail if exactly 0 devices are found to put in the pool. 2) If the function fails, clean up any partial interface pool and set netdef->forward.nifs to 0. This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1111455
-
由 Guido Günther 提交于
This tries to address https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688778 were libvirt autodetected vbox:///session and it wasn't listed in the manpage.
-
由 Guido Günther 提交于
Otherwise we fail like libvirt version: 1.2.7, package: 6 (root 2014-08-08-16:09:22 bogon) virAuditOpen:62 : Unable to initialize audit layer: Protocol not supported virFileGetDefaultHugepageSize:2958 : internal error: Unable to parse /proc/meminfo virStateInitialize:749 : Initialization of QEMU state driver failed: internal error: Unable to parse /proc/meminfo daemonRunStateInit:922 : Driver state initialization failed if the data can't be determined. Reference: http://bugs.debian.org/757609
-
由 Guido Günther 提交于
This fixes compilation on kFreeBSD which otherwise fails like CC util/libvirt_util_la-virprocess.lo In file included from /usr/include/sys/cpuset.h:35:0, from util/virprocess.c:43: /usr/include/sys/_cpuset.h:49:43: error: 'NBBY' undeclared here (not in a function) long __bits[howmany(CPU_SETSIZE, _NCPUBITS)]; ^ In file included from util/virprocess.c:43:0: /usr/include/sys/cpuset.h:215:12: error: unknown type name 'cpusetid_t' int cpuset(cpusetid_t *); ^ /usr/include/sys/cpuset.h:216:30: error: expected ')' before 'id_t' int cpuset_setid(cpuwhich_t, id_t, cpusetid_t); ^ /usr/include/sys/cpuset.h:217:42: error: expected ')' before 'id_t' int cpuset_getid(cpulevel_t, cpuwhich_t, id_t, cpusetid_t *); ^ /usr/include/sys/cpuset.h:218:48: error: expected ')' before 'id_t' int cpuset_getaffinity(cpulevel_t, cpuwhich_t, id_t, size_t, cpuset_t *); ^ /usr/include/sys/cpuset.h:219:48: error: expected ')' before 'id_t' int cpuset_setaffinity(cpulevel_t, cpuwhich_t, id_t, size_t, const cpuset_t *); And it's the correct usage as documented in http://www.freebsd.org/cgi/man.cgi?query=cpuset_setid Also change the #ifdef HAVE_BSH_CPU_AFFINITY to #if for consistency.
-
- 11 8月, 2014 2 次提交
-
-
由 Tomoki Sekiyama 提交于
A command to freeze a part of mounted file systems is implemented in upstream QEMU-guest-agent with a name of 'guest-fsfreeze-freeze-list'. This fixes the name of the command used to partial fsfreeze in qemu driver when 'mountpoints' option is specified to virDomainFSFreeze API. Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
-
由 Jianwei Hu 提交于
The virDomainSetInterfaceParameters implementation in qemu over VIR_DOMAIN_AFFECT_CONFIG doesn't work as expected. When trying to clear out the bandwidth settings for an interface, it has no actual effect: virsh # domiftune --config $domain $interface inbound.average: 100 inbound.peak : 0 inbound.burst : 0 outbound.average: 10 outbound.peak : 0 outbound.burst : 0 virsh domiftune --config $domain $interface 0 0 virsh # domiftune --config $domain $interface inbound.average: 100 inbound.peak : 0 inbound.burst : 0 outbound.average: 10 outbound.peak : 0 outbound.burst : 0 But according to virsh man page: To clear inbound or outbound settings, use --inbound or --outbound respectfully with average value of zero. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 09 8月, 2014 5 次提交
-
-
由 Kiarie Kahurani 提交于
introduce function xenParseXMOS(virConfPtr conf,...........); which parses the OS config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-
由 Kiarie Kahurani 提交于
introduce function xenParseXMGeneralMeta(virConfPtr conf, .......); which parses general metadata instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-
由 Kiarie Kahurani 提交于
introduce function xenParseXMEmulatedHardware(virConfPtr conf,.........); which parses emulated devices config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-
由 Kiarie Kahurani 提交于
introduce function xenParseXMVif(virConfPtr conf,........); which parses Vfb config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-
由 Kiarie Kahurani 提交于
introduce function xenParseXMCharDev(virConfPtr conf,.........); which parses Char devices config instead Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com>
-