- 03 6月, 2014 25 次提交
-
-
由 Jiri Denemark 提交于
Some of the APIs already return int since they can produce errors that need to be propagated. For consistency reasons, this patch changes the rest of the APIs to also return int even though they do not fail or report any errors.
-
由 Jiri Denemark 提交于
In general, we should only remove a backend after seeing DEVICE_DELETED event for a corresponding frontend. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
In general, we should only remove a backend after seeing DEVICE_DELETED event for a corresponding frontend. This doesn't make any difference for disks attached using -drive or drive_add since QEMU automatically removes their backends but it's still better to make our code consistent. And it may start making difference in case we switch to attaching disks using -blockdev. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
[1] reported that we are removing network's backend too early. I didn't really get the reproducer but libvirt behaves strangely when a guest does not confirm the removal, e.g., it does not support PCI hotplug. In such case, detaching a network device leaves its frontend in place but removes the backend, which makes the device unusable for the guest. Moreover attaching the same device again succeeds and both the guest and libvirt will see two network interfaces attached but only one of them is actually working. I checked with Paolo Bonzini and he confirmed we should only remove a backend after seeing DEVICE_DELETED event for a corresponding frontend. [1] https://www.redhat.com/archives/libvir-list/2014-March/msg01740.htmlSigned-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Peter Krempa 提交于
All the fields crammed into two lines weren't easy to parse by human eyes. Split up the format string into lines and put it into a central variable so that changes in two places aren't necessary.
-
由 Peter Krempa 提交于
This patch adds option to specify that a json qemu command argument is optional without the need to use if's or ternary operators to pass the list. Additionally all the modifier characters are documented to avoid user confusion.
-
由 Peter Krempa 提交于
To allow using the array manipulation macros on the arrays returned by virStringSplit we need to know the count of the elements in the array. Modify virStringSplit to return this value, rename it and add a helper with the old name so that we don't need to update all the code.
-
由 Peter Krempa 提交于
Now we don't need to skip backing chain detection for remote disks.
-
由 Peter Krempa 提交于
Use the new backing store parser in the backing chain crawler. This change needs one test change where information about the NBD image are now parsed differently.
-
由 Peter Krempa 提交于
Add parsers for relative and absolute backing names for local and remote storage files. This parser parses relative paths as relative to their parents and absolute paths according to the protocol or local access. For remote storage volumes, all URI based backing file names are supported and for the qemu colon syntax the NBD protocol is supported.
-
由 Peter Krempa 提交于
Use virStorageFileAccess() to to check whether the file is accessible in the main part of the metadata crawler.
-
由 Peter Krempa 提交于
Use virStorageFileReadHeader() to read headers of storage files possibly on remote storage to retrieve the image metadata. The backend information is now parsed by virStorageFileGetMetadataInternal which is now exported from the util source and virStorageFileGetMetadataFromFDInternal now doesn't need to be exported.
-
由 Peter Krempa 提交于
Use the virStorageFileGetUniqueIdentifier() function to get a unique identifier regardless of the target storage type instead of relying on canonicalize_path(). A new function that checks whether we support a given image is introduced to avoid errors for unimplemented backends.
-
由 Peter Krempa 提交于
Add a new function wrapper and tweak the storage file backend lookup function so that it can be used without reporting error. This will be useful in the metadata crawler code where we need silently break if metadata retrieval is not supported for the current storage type.
-
由 Peter Krempa 提交于
Stat the path of the storage file being tested to set the correct type into the virStorageSource. This will avoid breaking the test suite when inquiring metadata of directory paths in the next patches.
-
由 Peter Krempa 提交于
When walking the backing chain we previously set the storage type to _FILE and let the virStorageFileGetMetadataFromFDInternal update it to the correct type later on. This patch moves the actual storage type determination to the place where we parse the backing store name so that the code can later be switched to use virStorageFileReadHeader() directly.
-
由 Peter Krempa 提交于
My future work will modify the metadata crawler function to use the storage driver file APIs to access the files instead of accessing them directly so that we will be able to request the metadata for remote files too. To avoid linking the storage driver to every helper file using the utils code, the backing chain traversal function needs to be moved to the storage driver source. Additionally the virt-aa-helper and virstoragetest programs need to be linked with the storage driver as a result of this change.
-
由 Peter Krempa 提交于
Add a storage driver API equivalent of the access() function. Implementations for the filesystem and gluster backends are provided.
-
由 Peter Krempa 提交于
Different protocols have different means to uniquely identify a storage file. This patch implements a storage driver API to retrieve a unique string describing a volume. The current implementation works for local storage only and returns the canonical path of the volume. To add caching support the local filesystem driver now has a private structure holding the cached string, which is created only when it's initially accessed. This patch provides the implementation for local files only for start.
-
由 Michal Privoznik 提交于
It was just very recently that we transfered from: enum virSomeEnumName{ ... }; to: typedef enum { ... } virSomeEnumName; This change requires some code adaptation, which wasn't done for xenapi driver. With this fix we are able to build again. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
In 9dd02965 the virNumaGetNodeMemory was introduced, however the comment describing the function mentions virNumaGetNodeMemorySize. And there's one typo in virNumaIsAvailable() description. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Julio Faracco 提交于
In "src/conf/domain_conf.h" there are many enum declarations. The cleanup in this header filer was started, but it wasn't enough and there are many other files that has enum variables declared. So, the commit was starting to be big. This commit finish the cleanup in this header file and in other files that has enum variables, parameters, or functions declared. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Julio Faracco 提交于
In "src/conf/domain_conf.h" there are many enumerations (enum) declarations to be converted as a typedef too. As mentioned before, it's better to use a typedef for variable types, function types and other usages. I think this file has most of those enum declarations at "src/conf/". So, me and Eric Blake plan to keep the cleanups all over the source code. This time, most of the files changed in this commit are related to part of one file: "src/conf/domain_conf.h". Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
-
由 Julio Faracco 提交于
In "src/cpu/" there are some enumerations (enum) declarations. Similar to the recent cleanup to "src/util", "src/conf" and other directories, it's better to use a typedef for variable types, function types and other usages. Other enumeration and folders will be changed to typedef's in the future. Specially, in files that are in different places of "src/util" and "src/conf". Most of the files changed in this commit are related to CPU (cpu_map.h) enums. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
-
由 Michal Privoznik 提交于
Our public free functions explicitly don't accept NULL pointers (sigh). Therefore, callers must do something like this: if (dev) virNodeDeviceFree(dev); And we are not doing that on two places I've found. This leads to dummy error message thrown by virsh: virsh # nodedev-dumpxml nonexistent-device error: Could not find matching device 'nonexistent-device' error: invalid node device pointer in virNodeDeviceFree Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 02 6月, 2014 11 次提交
-
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1098659 With parallel boot, network addresses might not yet be assigned [1], but binding to wildcard addresses should work. For non-wildcard addresses, ADDRCONFIG is still used. Document this in libvirtd.conf. [1] http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Currently, we don not acquire any job when removing a device after DEVICE_DELETED event was received from QEMU. This means that if there is another API running at the time DEVICE_DELETED is delivered and the API acquired a job, we may happily change the definition of the domain the API is working with whenever it unlocks the domain object (e.g., to talk with its monitor). That said, we have to acquire a job before finishing device removal to make things safe. However, doing so in the main event loop would cause a deadlock so we need to move most of the event handler into a separate thread. Another good reason for both acquiring a job and handling the event in a separate thread is that we currently remove a device backend immediately after removing its frontend while we should only remove the backend once we already received DEVICE_DELETED event. That is, we will have to talk to QEMU monitor from the event handler. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
If QEMU supports DEVICE_DELETED event, we always call qemuDomainRemoveDevice from the event handler. However, we will need to push this call away from the main event loop and begin a job for it (see the following commit), we need to make sure the device is fully removed by the original thread (and within its existing job) in case the DEVICE_DELETED event arrives before qemuDomainWaitForDeviceRemoval times out. Without this patch, device removals would be guaranteed to never finish before the timeout because the could would be blocked by the original job being still active. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Pavel Hrdina 提交于
On freebsd there isn't known "setlocale" so we have to include locale.h
-
由 Nehal J Wani 提交于
Introduce helper program to catch events from dnsmasq and maintain a custom lease file per network. It supports dhcpv4 and dhcpv6. The file is saved as "<interface-name>.status". Each lease contains the following info: <expiry-time (epoch time)> <mac> <iaid> <ip-address> <hostname> <clientid> Example of custom leases file content: [ { "iaid": "1221229", "ip-address": "2001:db8:ca2:2:1::95", "mac-address": "52:54:00:12:a2:6d", "hostname": "Fedora20", "client-id": "00:04:1a:c1:d9:6b:5a:0a:e2:bc:f8:4b:1e:37:2e:38:22:55", "expiry-time": 1393244216 }, { "ip-address": "192.168.150.208", "mac-address": "52:54:00:11:56:b3", "hostname": "Wani-PC", "client-id": "01:52:54:00:11:56:b3", "expiry-time": 1393244248 } ] src/Makefile.am: * Add options to compile the helper program src/network/bridge_driver.c: * Introduce networkDnsmasqLeaseFileNameCustom() * Invoke helper program along with dnsmasq * Delete the .status file when corresponding n/w is destroyed. src/network/leaseshelper.c * Helper program to create the custom lease file
-
由 Peter Krempa 提交于
When looking up storage volumes virsh uses multiple lookup steps. Some of the steps don't require a pool name specified. This resulted into a possibility that a volume would be part of a different pool than the user specified: Let's have a /var/lib/libvirt/images/test.qcow image in the 'default' pool and a second pool 'emptypool': Currently we'd return: $ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow Name: test.qcow Type: file Capacity: 100.00 MiB Allocation: 212.00 KiB After the fix: $ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool' Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
-
由 Daniel Veillard 提交于
-
由 Daniel Veillard 提交于
-
由 Daniel Veillard 提交于
* docs/news.html.in: update for release * po/*.po*: updated ukrainian localization and regenerated
-
由 Roman Bogorodskiy 提交于
- Document 'domxml-to-native' command - Mention that the nmdm console support needs an appropriate kernel module loaded
-
- 01 6月, 2014 1 次提交
-
-
由 Laine Stump 提交于
Reported by: Roman Bogorodskiy <bogorodskiy@gmail.com> Some of the tests for virTimeLocalOffsetFromUTC set an imaginary timezone that attempts to force dyalight savings time active all the time by setting a start date of 0/00:00:00 and end date of 366/23:59:59. Since the day is 0-based, 366 really means "day 367" which will never occur - this was an attempt to eliminate problems with DST not being active in some cases right around midnight on January 1. Even though it didn't completely solve the problem, it didn't seem to cause harm so it was left in the test timezones. Although Linux glibc doesn't mind having a DST end date of 366, FreeBSD refuses to use such timezones, so the tests fail. This patch changes the 366 to 365. This may or may not cause failure of the remaining DST tests around midnight Jan 1. If so, we will need to disable those tests at year's end too.
-
- 31 5月, 2014 1 次提交
-
-
由 Eric Blake 提交于
On a 32-bit platform: virstringtest.c: In function 'mymain': virstringtest.c:673: warning: this decimal constant is unsigned only in ISO C90 I already had a comment in the file about the 64-bit counterpart; the easiest fix was to make both sites use the standardized macro that is guaranteed to work. * tests/virstringtest.c (mymain): Minimum signed integers are a pain. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 29 5月, 2014 2 次提交
-
-
由 Peter Krempa 提交于
Currently we don't support mixed (external + internal) snapshots. The code detecting the snapshot type didn't make sure that the memory image was consistent with the snapshot type leading into strange error message: $ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=external,file=/tmp/blah error: internal error: unexpected code path Fix the mixed detection code to detect this kind of mistake: $ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=external,file=/tmp/blah error: unsupported configuration: mixing internal and external targets for a snapshot is not yet supported
-
由 Peter Krempa 提交于
A internal snapshot of a active VM with the memory snapshot disabled explicitly would actually still take the memory snapshot. Reject it explicitly. Before: $ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=no Domain snapshot 1401353155 created After: $ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=no error: Operation not supported: internal snapshot of a running VM must include the memory state Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1083345
-