https://bugzilla.redhat.com/show_bug.cgi?id=956994

Currently, it is possible to start an interface that is already running:

 # virsh iface-start eth2
 Interface eth2 started

 # echo $?
 0

 # virsh iface-start eth2
 Interface eth2 started

 # echo $?
 0

 # virsh iface-start eth2
 Interface eth2 started

 # echo $?
 0

Same applies for destroying a dead interface. We should not allow such
state transitions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function barely wraps ncf_if_status() and error handling code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

By actually removing the <vcpupin> element (from within the
<cputune> section) from the XML, rather than jus update it with
a fully set vcpu affinity mask.
Signed-off-by: NDario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>

And use it to implement libxlDomainPinVcpu(), similarly to what
happens in the QEMU driver. This way, it is possible to both
query and change the vcpu affinity of a persistent but not
running domain.

In face, before this patch, we have:
 # virsh list --all
  Id    Name                           State
 ----------------------------------------------------
  5     debian_32                      running
  -     fedora20_64                    shut off
 # virsh vcpupin fedora20_64 0 2-4 --current
 error: this function is not supported by the connection driver: virDomainPinVcpuFlags

After (same situation as above):
 # virsh vcpupin  fedora20_64 0 2-4 --current
 # virsh vcpupin  fedora20_64 0
 VCPU: CPU Affinity
 ----------------------------------
    0: 2-4
Signed-off-by: NDario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>

So that it is possible to query vcpu related information of
a persistent but not running domain, like it is for the QEMU
driver.

In fact, before this patch, we have:
 # virsh list --all
  Id    Name                           State
 ----------------------------------------------------
  5     debian_32                      running
  -     fedora20_64                    shut off
 # virsh vcpuinfo fedora20_64
 error: this function is not supported by the connection driver: virDomainGetVcpuPinInfo

After (same situation as above, i.e., fedora20_64 not running):
 # virsh vcpuinfo fedora20_64
 VCPU:           0
 CPU:            N/A
 State:          N/A
 CPU time        N/A
 CPU Affinity:   yyyyyyyy

 VCPU:           1
 CPU:            N/A
 State:          N/A
 CPU time        N/A
 CPU Affinity:   yyyyyyyy
Signed-off-by: NDario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>

This resolves:

   https://bugzilla.redhat.com/show_bug.cgi?id=1045002

If a domain has an <interface type='hostdev'> or an <interface
type='network'> where the network itself is a pool of hostdev devices,
then libvirt will internally keep that device on both the interface
list *and* the hostdev list for the domain. One of the places this
comes in handy is when a new device is being added and libvirt wants
to find a unique "alias" name for it - it just scans through the
hostdev array and makes sure it picks a name that doesn't match the
alias of any device in that array.

However, when libvirtd was restarted, if there was an <interface
type='network'> with the network being a hostdev pool, the device
would not be added to the reconstructed internal hostdev array, so its
alias would not be found during a scan of the hostdev array, thus
attempts to add a new hostdev (or <interface type='hostdev'> or
<interface type='network'>) would result in a message like this:

internal error: unable to execute QEMU command 'device_add':
                Duplicate ID 'hostdev0' for device

This patch simply fixes the existing code in the domain XML parser
that fixes up the hostdev array in the case of <interface
type='hostdev'> to do the same thing in the case of <interface
type='network'> with a hostdev network.

This bug has existed since the very first addition of hostdev networks
to libvirt (0.10.0).

This eliminates the misleading error message that was being logged
when a vfio hostdev hotplug failed:

  error: unable to set user and group to '107:107' on '/dev/vfio/22':
         No such file or directory

as documented in:

  https://bugzilla.redhat.com/show_bug.cgi?id=1035490

Commit ee414b5d (pushed as a fix for Bug 1016511 and part of Bug
1025108) replaced the single call to
virSecurityManagerSetHostdevLabel() in qemuDomainAttachHostDevice()
with individual calls to that same function in each
device-type-specific attach function (for PCI, USB, and SCSI). It also
added a corresponding call to virSecurityManagerRestoreHostdevLabel()
in the error handling of the device-type-specific functions, but
forgot to remove the common call to that from
qemuDomainAttachHostDevice() - this resulted in a duplicate call to
virSecurityManagerRestoreHostdevLabel(), with the second occurrence
being after (e.g.) a PCI device has already been re-attached to the
host driver, thus destroying some of the device nodes / links that we
then attempted to re-label (e.f. /dev/vfio/22) and generating an error
log that obscured the original error.

This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=1035490

virProcessSetMaxMemLock() (which is a wrapper over prlimit(3)) expects
the memory size in bytes, but libvirt's domain definition (which was
being used by qemuDomainAttachHostPciDevice()) stores all memory
tuning parameters in KiB. This was being accounted for when setting
MaxMemLock at domain startup time (so cold-plugged devices would
work), but not for hotplug.

This patch simplifies the few lines that call
virProcessSetMemMaxLock(), and multiply the amount * 1024 so that
we're locking the correct amount of memory.

What remains a mystery to me is why hot-plug of a managed='no' device
would succeed (at least on my system) while managed='yes' would
fail. I guess in one case the memory was coincidentally already
resident and in the other it wasn't.

Commit id '4313fead' added a call to virDomainPanicCheckABIStability()
which did not check whether the panic device existed before making a call
to virDomainDeviceInfoCheckABIStability() which ended up segfaulting:

Thread 1 (Thread 0x7f5332837700 (LWP 10964)):
    (src=<optimized out>, dst=<optimized out>)
    at conf/domain_conf.c:13007
    (dst=<optimized out>, src=<optimized out>)
    at conf/domain_conf.c:13712
    (src=<optimized out>, dst=<optimized out>)
    at conf/domain_conf.c:14056
    (domain=domain@entry=0x7f53000057c0, vm=vm@entry=0x7f53000036d0,
     defptr=defptr@entry=0x7f5332836978, snap=snap@entry=0x7f5332836970,
     update_current=update_current@entry=0x7f5332836962, flags=flags@entry=1)
    at conf/snapshot_conf.c:1230
    (domain=0x7f53000057c0, xmlDesc=<optimized out>, flags=1)
    at qemu/qemu_driver.c:12719
    (domain=domain@entry=0x7f53000057c0, xmlDesc=0x7f53000081d0
     "<domainsnapshot>\n  <name>snap2</name>\n
     <description>new-desc</description>\n  <state>running</state>\n
     <parent>\n    <name>snap1</name>\n  </parent>\n
     <creationTime>1387487268</creationTime>\n  <memory s"..., flags=1)
    at libvirt.c:19695
...

(gdb) up 3
(gdb) print *other->def->dom
$2 = {virtType = 2, id = -1, ..
...
  rng = 0x0, panic = 0x0, namespaceData = 0x0,...
...
(gdb) print *def->dom
$3 = {virtType = 2, id = -1, ...
...
  rng = 0x0, panic = 0x0, namespaceData = 0x0,...
...
(gdb)

Also seen using following sequence:

virsh save $dom $file
virsh save-image-edit $file
  add (or remove) a <panic/> line
  <devices>
  ...
    <panic>
      <address type='isa' iobase='0x505'/>
    </panic>
  ...
  </devices>

there is a segfault in libxl logging in libxl_ctx_free when domain
create fail. because the log output handler vmessage is freed by
xtl_logger_destroy before libxl_ctx_free in virDomainObjListRemove.
move xtl_logger_destroy after libxl_ctx_free could fix this bug.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:

 # ./daemon/libvirtd -v
 *** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
 ======= Backtrace: =========
 /lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
 /lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
 /home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
 /home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
 /home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
 /lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
 /lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: NDario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>

The function doesn't check whether the request is made for active or
inactive domain.  Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).

I re-made the function in order for it to work the same way it's qemu
counterpart does.

Reproducer:
 1) Define an LXC domain
 2) Do 'virsh memtune <domain> --hard-limit 133T'

Backtrace:
 Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
 #0  0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
 #1  0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
     at util/vircgroup.c:669
 #2  0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
 #3  0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
 #4  0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
     at util/vircgroup.c:1944
 #5  0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
     params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
 #6  0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
     params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
 #7  0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
     client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
     at remote_dispatch.h:7621
 #8  0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
     client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
     ret=0x7fffe40b84f0) at remote_dispatch.h:7591
 #9  0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
     at rpc/virnetserverprogram.c:435
 #10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
     at rpc/virnetserverprogram.c:305
 #11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
     prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
 #12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
     at rpc/virnetserver.c:186
 #13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
 #14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
 #15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
 #16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The function doesn't check whether the request is made for active or
inactive domain.  Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).

I re-made the function in order for it to work the same way it's qemu
counterpart does.

Reproducer:
 1) Define an LXC domain
 2) Do 'virsh memtune <domain>'

Backtrace:
 Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
 #0  0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
 #1  0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
 #2  0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
     key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
 #3  0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
     at util/vircgroup.c:1962
 #4  0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
     params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
 #5  0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
     params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
 #6  0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
     client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
     ret=0x7fffd4002420) at remote.c:1895
 #7  0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
     client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
     ret=0x7fffd4002420) at remote_dispatch.h:4050
 #8  0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
     at rpc/virnetserverprogram.c:435
 #9  0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
     server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
     at rpc/virnetserverprogram.c:305
 #10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
     prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
 #11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
     at rpc/virnetserver.c:186
 #12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
 #13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
 #14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
 #15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

While looking at event code, I noticed that the documentation was
trying to refer me to functions that don't exist.  Also fix some
typos and poor formatting.

* src/libvirt.c (virConnectDomainEventDeregister)
(virConnectDomainEventRegisterAny)
(virConnectDomainEventDeregisterAny)
(virConnectNetworkEventRegisterAny)
(virConnectNetworkEventDeregisterAny): Link to correct function.
* include/libvirt.h.in (VIR_DOMAIN_EVENT_CALLBACK)
(VIR_NETWORK_EVENT_CALLBACK): Likewise.
(virDomainEventID, virConnectDomainEventGenericCallback)
(virNetworkEventID, virConnectNetworkEventGenericCallback):
Improve docs.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 6cd60b68 was flat out broken - it tried to print into the
wrong variable.  My testing was obviously too cursory (did the
name get a slash added?); valgrind would have caught the error.
Thankfully it didn't hit any release.

Reported by Peter Krempa.

* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Fix bogus code.
Signed-off-by: NEric Blake <eblake@redhat.com>

The VIR_WARNINGS_NO_CAST_ALIGN / VIR_WARNINGS_RESET should
not have any trailing ';' since they are pragmas. The use
of a ';' results in an empty statement which confuses CIL.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the code around so that the forward declaration isn't needed. Also
fix code style of the opening brace of the function by moving it to a
separate line.

Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.

This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.

Currently the virDBusAddWatch does

  virEventAddHandle(fd, flags,
                    virDBusWatchCallback,
                    watch, NULL);
  dbus_watch_set_data(watch, info, virDBusWatchFree);

Unfortunately this is racy - since the event loop is in a
different thread, the virDBusWatchCallback method may be
run before we get to calling dbus_watch_set_data. We must
reverse the order of these calls

See https://bugzilla.redhat.com/show_bug.cgi?id=885445Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Starting from commit 2e82c18c in Xen (will be included in Xen 4.4)
both libxl_get_max_cpus() and libxl_get_max_nodes() start returning
a proper libxl error code, in case of failure. This patch fixes
this in the libxl driver.

Note that, although it is now basically impossible for them to return
0, that would, theoretically, still be wrong. Also, checking that the
returned value is '<= 0' makes the code correct for both Xen 4.4 and
Xen 4.3 (and 4.2), and that is why we go for it (rather than
just '< 0').
Signed-off-by: NDario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

On a system that is enforcing FIPS, most libraries honor the
current mode by default.  Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux.  So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting.  Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).

The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474

* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.

http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently, 'vol-resize --allocate' allocates new space at the
vol->capacity offset. But the vol->capacity is not necessarily the same
as vol->allocation. For instance:.

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  1.00 GiB  1.00 GiB

	[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 2G

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  2.00 GiB  1.00 GiB

So, if we want to allocate more bytes, so the file is say 3G big, the
real allocated size is 2G actually:

	[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  3.00 GiB  2.00 GiB

This commit uses the correct vol->allocation instead of incorrect
vol->capacity, so the output of the commands above looks like this:

	[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  3.00 GiB  3.00 GiB

Moreover, if the '--alocate' flag was used, we must update the
vol->allocation member in storageVolResize API too, not just
vol->capacity.
Reported-by: NWang Sen <wangsen@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

vmx/vmx.c ignores the transient attribute on the disk xml format. This patch
adds a 1-1 relationship between it and [disk].mode = "independent-nonpersistent".

The other modes are ignored as before. It works in my testing.

https://bugzilla.redhat.com/show_bug.cgi?id=1044023Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The newroot is not mounted as tmpfs, we bind root->src to it.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The event namespace concept is mostly redundant information.
With the re-written dispatcher, the namespace is only used
for equality comparisons between event IDs. This can be solved
by just comparing virClassPtr instances instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of having the object event code have to know about each
type of event and their dispatch functions, associate a dispatch
function with the object instance. The dispatch code can thus be
significantly simplified.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Inject a virNetworkEvent class between virObjectEvent
and virNetworkEventLifecycle to mirror virDomainEvent.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While the public API & wire protocol included the 'detail'
arg for network lifecycle events, the internal event handling
code did not process it. This meant that if a future libvirtd
server starts sending non-0 'detail' args, the current libvirt
client will not process them.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While running objecteventtest, it was found that valgrind pointed out the
following memory leak:

==13464== 5 bytes in 1 blocks are definitely lost in loss record 7 of 134
==13464==    at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==13464==    by 0x341F485E21: strdup (strdup.c:42)
==13464==    by 0x4CAE28F: virStrdup (virstring.c:554)
==13464==    by 0x4CF3CBE: virObjectEventCallbackListAddID (object_event.c:286)
==13464==    by 0x4CF49CA: virObjectEventStateRegisterID (object_event.c:729)
==13464==    by 0x4CF73FE: virDomainEventStateRegisterID (domain_event.c:1424)
==13464==    by 0x4D7358F: testConnectDomainEventRegisterAny (test_driver.c:6032)
==13464==    by 0x4D600C8: virConnectDomainEventRegisterAny (libvirt.c:19128)
==13464==    by 0x402409: testDomainStartStopEvent (objecteventtest.c:232)
==13464==    by 0x403451: virtTestRun (testutils.c:138)
==13464==    by 0x402012: mymain (objecteventtest.c:395)
==13464==    by 0x403AF2: virtTestMain (testutils.c:593)
==13464==

The support for <boot rebootTimeout="12345"/> was added before we were
checking for qemu command line options in QMP, so we haven't properly
adapted virQEMUCaps when using it and thus we report unsupported
option with new enough qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We missed a return when virProcessKillPainfully
failed to kill lxc process
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Recent changes to events (commit 8a29ffcf) resulted in new compile
failures on some targets (such as ARM OMAP5):
conf/domain_event.c: In function 'virDomainEventDispatchDefaultFunc':
conf/domain_event.c:1198:30: error: cast increases required alignment of
target type [-Werror=cast-align]
conf/domain_event.c:1314:34: error: cast increases required alignment of
target type [-Werror=cast-align]
cc1: all warnings being treated as errors

The error is due to alignment; the base class is merely aligned
to the worst of 'int' and 'void*', while the child class must
be aligned to a 'long long'.  The solution is to include a
'long long' (and for good measure, a function pointer) in the
base class to ensure correct alignment regardless of what a
child class may add, but to wrap the inclusion in a union so
as to not incur any wasted space.  On a typical x86_64 platform,
the base class remains 16 bytes; on i686, the base class remains
12 bytes; and on the impacted ARM platform, the base class grows
from 12 bytes to 16 bytes due to the increase of alignment from
4 to 8 bytes.

Reported by Michele Paolino and others.

* src/util/virobject.h (_virObject): Use a union to ensure that
subclasses never have stricter alignment than the parent.
* src/util/virobject.c (virObjectNew, virObjectUnref)
(virObjectRef): Adjust clients.
* src/libvirt.c (virConnectRef, virDomainRef, virNetworkRef)
(virInterfaceRef, virStoragePoolRef, virStorageVolRef)
(virNodeDeviceRef, virSecretRef, virStreamRef, virNWFilterRef)
(virDomainSnapshotRef): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpenInternal)
(qemuMonitorClose): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu.  Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

panic device is a device that enables libvirt to receive notification
of guest panic event.
Signed-off-by: NEric Blake <eblake@redhat.com>

For example:
<address type='isa' iobase='0x505' irq='0x1'/>
Signed-off-by: NEric Blake <eblake@redhat.com>

The throttle blkio cgroup will reuse this struct.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>