- 11 3月, 2016 36 次提交
-
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Until now, the script assumed that snapshot name is 'snap', but that's going to change. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since we have the opportunity now, let's save some precious code lines. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Let's call it modern_ret_as_list as opposed to single_ret_as_list. The latter was able to return list of things. However the new, more modern, version came and it is used since listAllDomains till nowadays in ListServers. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
We were using parentheses for grouping admin|remote even though we didn't need to capture what's in it. That caused some changes to be greater than needed and, to be honest, some confusion as well. Let's use it as it should be used. It'll also make future changes more consistent. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Resetting an error should be the first thing public API does. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
virAdmConnectGetURI() returns string that needs to be free()'d but we haven't done that. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
There are no priority workers as they don't make sense for now. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
For now it does not matter which ones we return as the code is similarly complex, however it will fit in with other constructs in the future, mainly when we will be able to generate dispatch helpers. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
virAdm is prefix only used on the client side. Or at least for now. On server, though, this corresponds to virNet structures (virAdmConnect is virNetDaemon, virAdmServer should be virNetServer, in the future virAdmClient will be resolved to virNetServerClient, and so on). This will also make future work clearer and easier. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
virHashForEach() returns 0 if everything went nice, so our session daemon was timing out even when there was a client connected. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1315606Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This serves the same purpose as VIR_ERR_NO_xxx where xxx is any object that API can be called upon. Only this particular one is used for daemon's servers. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since servers know their name, there is no need to supply such information twice. Also defeats inconsistencies. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
At first I did not want to do this, but after trying to implement some newer feaures in the admin API I realized we need that to make our lives easier. On the other hand they are not saved redundantly and the virNetServer objects are still kept in a hash table. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Function virAdmConnectListServers() forgot to check for flags at all, virAdmConnectOpen() on the other hand checked them but did no dispatch the error. virCheckFlags() should be used only when there should be no other thing done after erroring out and since they are used on different places then just public API, they cannot dispatch errors. So let's use virCheckFlagsGoto instead. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
We don't want to end up like with virDomainFree() and other, right? Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the network device options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the -fsdev options to the command line removing that task from the mainline qemuBuildCommandLine. Alter the code slightly to perform the !caps and fsdev failure check up front. Since both qemuBuildFSStr and qemuBuildFSDevStr are local, make them static and fix their prototypes to use the const virDomainDef as well. Make some minor formatting changes for long lines. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the disk -drive options to the command line removing that task from the mainline qemuBuildCommandLine. Also since using const virDomainDef in new function, that means other functions called needed to change their usage. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the hub -device options to the command line removing that task from the mainline qemuBuildCommandLine. Also make qemuBuildHubDevStr static to the module since it's only used here. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the controller -device options to the command line removing that task from the mainline qemuBuildCommandLine. Also adjust to using const virDomainDef instead of virDomainDefPtr. This causes collateral damage in order to modify called APIs to use the const virDomainDef instead as well. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the -global controller options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the -boot options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the power management options to the command line removing that task from the mainline qemuBuildCommandLine. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add new function to manage adding the '-clock' options to the command line removing that task from the mainline qemuBuildCommandLine. Also includes some minor formatting cleanups. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Marc-André Lureau 提交于
When debug-threads is enabled, individual threads are given a separate name (on Linux) Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1140121Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Marc-André Lureau 提交于
QEMU (somewhere around 2.0) added a new sub-option to the -name flag -name debug-threads=on. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Chunyan Liu 提交于
Reuse existing helper function virDomainNetGetActualtype. Signed-off-by: NChunyan Liu <cyliu@suse.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Cole Robinson 提交于
- Add line-height:150% spacing for all text. This makes text lines far less cramped, and seems closer visually to what wikipedia uses. - Remove bottom and top margin from lists: entries seemed needlessly spread out. - Reduce sublist indentation a bit - Add a bottom border after headings: IMO this greatly helps in break up the vertical flow of a big page of text. Doesn't look great on the front page, but helps a lot on dense pages like formatdomain
-
由 Cole Robinson 提交于
- change font-family to just 'sans-serif' rather than hardcode a few font families. this means we abide the user's browser font setting, and makes us consistent with other sites like en.wikipedia.org - raise font-size to 90%. this is what en.wikipedia.org uses. With these two tweaks, libvirt.org text renders the same as en.wikipedia.org with fedora firefox out of the box config. Previously the font on libvirt.org was very small and difficult to read.
-
由 Cole Robinson 提交于
- Drop some redundant bits - Use consistent spacing - Group similar blocks near each other There should be no functional change
-
由 Cole Robinson 提交于
This is long since obsolete, just scrap it all
-
- 10 3月, 2016 4 次提交
-
-
由 Daniel P. Berrange 提交于
Currently the file based character devices let QEMU write directly to a file on disk. This allows a malicious QEMU to inflict a denial of service by consuming all free space. Switch QEMU to use a pipe to virtlogd, which will enforce file rollover. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
If use of virtlogd is enabled, then use it for backing the character device log files too. This avoids the possibility of a guest denial of service by writing too much data to the log file.
-
由 Daniel P. Berrange 提交于
The virtlogd daemon currently opens all files for append, but in some cases the user may wish to discard existing data. Define a new flag to indicate that logfiles should be truncated when opening.
-
由 Daniel P. Berrange 提交于
The functions for handling FD passing when building command line arguments need to be used by many different bits of code, so need to be at the start of the source file Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-