https://bugzilla.redhat.com/show_bug.cgi?id=1160926

Passing a copy of the storage pool adapter to a function just changes the
copy of the fields in the particular function and then when returning to
the caller those changes are discarded.  While not yet biting us in the
storage clean-up case, it did cause an issue for the fchost storage pool
startup case, createVport.  The issue was at startup, if no parent is found
in the XML, the code will search for the 'best available' parent and then
store that in the in memory copy of the adapter.  Of course, in this case
it was a copy, so when returning to the virStorageBackendSCSIStartPool that
change was discarded (or lost) from the pool->def->source.adapter which
meant at shutdown (deleteVport), the code assumed no adapter was passed
and skipped the deletion, leaving the vHBA created by libvirt still defined
requiring an additional stop of a nodedev-destroy to remove.

Adjusted the createVport to take virStoragePoolDefPtr instead of the
adapter copy. Then use the virStoragePoolSourceAdapterPtr when processing.
A future patch will need the 'def' anyway, so this just sets up for that.

Since commit 3f99d64d no new scsi_host pools can be defined
if one of the already defined scsi_host pools does not refer
to an accessible scsi_host adapter.

Relax the check by skipping over these inaccessible pools
when checking for duplicates.

If both source adapters are specified by a parent address,
just comparing the address is faster and catches even addresses
that do not refer to valid adapters.

https://bugzilla.redhat.com/show_bug.cgi?id=1146837

Resolve a crash in libvirtd resulting from commit id 'a4bd62ad' (1.0.6)
which added parentaddr and unique_id to allow unique identification of
a scsi_host, but assumed that all the pool entries and the incoming
definition would be similarly defined. If the existing pool uses the
'name' attribute and an incoming pool is using the parentaddr/unique_id,
then the code will attempt to compare the existing name string against
the incoming name string which doesn't exist (is NULL) and results in
a core (STREQ).

Conversely, if the existing pool used the parentaddr/unique_id and the
to be defined pool used the name, then the comparison would be against
the parentaddr, but since the incoming pool doesn't have one - that would
leave the comparison against a parentaddr of all 0's and a unique_id of 0,
which will always comparison to fail. This means someone could define the
same source adapter for two pools

In order to resolve this, adjust the code to get the 'host#' to be used
by the storage scsi backend in order to check/start the pool and make sure
the incoming definition doesn't match any of the existing pool defs.

 - Provide an implementation for buildPool and deletePool operations
   for the ZFS storage backend.
 - Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
   as now we can specify devices to build pool from
 - storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
   add an optional 'target' to 'poolzfs' entity
 - Add a couple of tests to storagepoolxml2xmltest

Since 9f781da6

Resolve a libvirtd crash in virStoragePoolSourceFindDuplicate()
when there is an existing SCSI pool defined with adapter type as
'scsi_host' and defining a new SCSI pool with adapter type as
'fc_host' and parent attribute missing or vice versa.

For example, if there is an existing SCSI pool with adapter type
as 'scsi_host' defined using the following XML

<pool type='scsi'>
  <name>TEST_SCSI_POOL</name>
    <source>
       <adapter type='scsi_host' name='scsi_host1'/>
    </source>
    <target>
        <path>/dev/disk/by-path</path>
    </target>
</pool>

When defining another SCSI pool with adapter type as 'fc_host' using the
following XML will crash libvirtd

<pool type='scsi'>
  <name>TEST_SCSI_FC_POOL</name>
  <source>
     <adapter type='fc_host' wwnn='1234567890abcdef' wwpn='abcdef1234567890'/>
  </source>
  <target>
     <path>/dev/disk/by-path</path>
  </target>
</pool>

Same is true for the reverse case as well where there exists a SCSI pool
with adapter type as 'fc_host' and another SCSI pool is defined with
adapter type as 'scsi_host'.

This happens because for fc_host 'name' is optional attribute whereas for
scsi_host its mandatory. However the check in libvirt for finding duplicate
storage pools didn't take that into account while comparing
Signed-off-by: NPradipta Kr. Banerjee <bpradip@in.ibm.com>

If there was a failure processing 'authdef' and the code went to cleanup
before the setting to source->auth, then it'd be leaked.

And add a syntax-check for '){$'.  It's not perfect, but better than
nothing.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>

Between reboots and kernel reloads, the SCSI host number used for SCSI
storage pools may change requiring modification to the storage pool XML
in order to use a specific SCSI host adapter.

This patch introduces the "parentaddr" element and "unique_id" attribute
for the SCSI host adapter in order to uniquely identify the adapter
between reboots and kernel reloads. For now the goal is to only parse
and format the XML. Both will be required to be provided in order to
uniquely identify the desired SCSI host.

The new XML is expected to be as follows:

  <adapter type='scsi_host'>
    <parentaddr unique_id='3'>
      <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/>
    </parentaddr>
  </adapter>

where "parentaddr" is the parent device of the SCSI host using the PCI
address on which the device resides and the value from the unique_id file
for the device. Both the PCI address and unique_id values will be used
to traverse the /sys/class/scsi_host/ directories looking at each link
to match the PCI address reformatted to the directory link format where
"domain:bus:slot:function" is found.  Then for each matching directory
the unique_id file for the scsi_host will be used to match the unique_id
value in the xml.

For a PCI address listed above, this will be formatted to "0000:00:1f.2"
and the links in /sys/class/scsi_host will be used to find the host#
to be used for the 'scsi_host' device. Each entry is a link to the
/sys/bus/pci/devices directories, e.g.:

%  ls -al /sys/class/scsi_host/host2
lrwxrwxrwx. 1 root root 0 Jun  1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2

% cat /sys/class/scsi_host/host2/unique_id
3

The "parentaddr" and "name" attributes are mutually exclusive to identify
the SCSI host number. Use of the "parentaddr" element will be the preferred
mechanism.

This patch only supports to parse and format the XMLs. Later patches will
add code to find out the scsi host number.

Preparation for future patches by creating a scsi_host union. For now,
just the 'name' will be present.

Add 'nocow' to storage volume xml so that user can have an option
to set NOCOW flag to the newly created volume. It's useful on btrfs
file system to enhance performance.

Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this
bad performance is to turn off COW attributes on VM files. Generally, there
are two ways to turn off COW on btrfs: a) by mounting fs with nodatacow,
then all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.

This patch tries the second way, according to 'nocow' option, it could set
NOCOW flag per file:
for raw file images, handle 'nocow' in libvirt code; for non-raw file images,
pass 'nocow=on' option to qemu-img, and let qemu-img to handle that (requires
qemu-img version >= 2.1).
Signed-off-by: NChunyan Liu <cyliu@suse.com>

As we have a nested pointer for storing the backing store of a volume
there's no need to store it in a separate struct.

Commit dae1568c converted the perms
member of the virStorageVolTarget struct into a pointer to make it
optional. But virStorageVolTargetDefFormat did not check perms for
NULL before dereferencing it.

Replace the authType, chap, and cephx unions in virStoragePoolSource
with a single pointer to a virStorageAuthDefPtr.  Adjust all users of
the previous chap/cephx and secret unions with the source->auth data.

Replace:
if (virBufferError(&buf)) {
    virBufferFreeAndReset(&buf);
    virReportOOMError();
    ...
}

with:
if (virBufferCheckError(&buf) < 0)
    ...

This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)

Libvirt didn't output feature flags for images stored on native gluster.
Fix this trivially by adding a feature formatter callback.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1095035

The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name.  Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.

* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: NEric Blake <eblake@redhat.com>

When reading configuration files, we were silently ignoring
directory read failures.  While unlikely, we might as well
report them.

* src/conf/domain_conf.c (virDomainObjListLoadAllConfigs): Report
readdir errors.
* src/conf/network_conf.c (virNetworkLoadAllState)
(virNetworkLoadAllConfigs): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterLoadAllConfigs): Likewise.
* src/conf/storage_conf.c (virStoragePoolLoadAllConfigs):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile.  As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file.  This sets up the fields for
the tracking, although it does not modify XML to display any
new information.

* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.

A fairly smooth transition.  And now that domain disks and
storage volumes share a common struct, it opens the doors for
a future patch to expose more details in the XML for both
objects.

* src/conf/storage_conf.h (_virStorageVolTarget): Delete.
(_virStorageVolDef): Use common type.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolTargetDefFormat): Update clients.
* src/storage/storage_backend.h: Likewise.
* src/storage/storage_backend.c
(virStorageBackendDetectBlockVolFormatFD)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Some preparatory work before consolidating storage volume
structs with the rest of virstoragefile.  Making these
changes allows a volume target to be much closer to (a
subset of) the virStorageSource struct.

Making perms be a pointer allows it to be optional if we
have a storage pool that doesn't expose permissions in a
way we can access.  It also allows future patches to
optionally expose permissions details learned about a disk
image via domain <disk> listings, rather than just
limiting it to storage volume listings.

Disk partition types was only used by internal code to
control what type of partition to create when carving up
an MS-DOS partition table storage pool (and is not used
for GPT partition tables or other storage pools).  It was
not exposed in volume XML, and as it is more closely
related to extent information of the overall block device
than it is to the <target> information describing the host
file.  Besides, if we ever decide to expose it in XML down
the road, we can move it back as needed.

* src/conf/storage_conf.h (_virStorageVolTarget): Change perms to
pointer, enhance comments.  Move partition type...
(_virStorageVolSource): ...here.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolDefParseXML, virStorageVolTargetDefFormat): Update
clients.
* src/storage/storage_backend_fs.c (createFileDir): Likewise.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(virStorageBackendCreateRaw, virStorageBackendCreateExecCommand)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskPartTypeToCreate): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The <source> elements need to be indented from <sources> elements.

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Again completely mechanical, but a lot of lines.

This allows it to be used by the VIR_*_ELEMENT macros.

Also use them for parsing the definiton and remove the redundant
freeing of 'nodeset' before jumping to the cleanup label.

Open-coding one VIR_FREE in the test suite just doesn't seem right.

This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...

Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().

Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The internal pools were an idea in one of the first iterations of the
gluster series, which we decided not to use. Somehow the patch still
got pushed. Remove it as the internal flag isn't needed.

This reverts commit 362da820.

To allow using the storage driver APIs to do operation on generic domain
disks we will need to introduce internal storage pools that will give is
a base to support this stuff even on files that weren't originally
defined as a part of the pool.

This patch introduces the 'internal' flag for a storage pool that will
prevent it from being listed along with the user defined storage pools.

Currently, during XML parsing, when a call to a FromString() function to
get an enum value fails, the error which is reported is either
VIR_ERR_CONFIG_UNSUPPORTED, VIR_ERR_INTERNAL_ERROR or VIR_ERR_XML_ERROR.

This commit makes such conversion failures consistently return
VIR_ERR_CONFIG_UNSUPPORTED.

Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.

This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.

In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory.  But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch.  Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).

* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

We support gluster volumes in domain XML, so we also ought to
support them as a storage pool.  Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents.  This sets up the framework.

Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.

This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested.  A future patch may lower
the minimum.  On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].

[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html

* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: NEric Blake <eblake@redhat.com>

I got annoyed at having to use both 'virsh vol-list $pool --details'
AND 'virsh vol-dumpxml $vol $pool' to learn if I had populated
the volume correctly.  Since two-thirds of the data present in
virStorageVolGetInfo() already appears in virStorageVolGetXMLDesc(),
this just adds the remaining piece of information, as:

<volume type='...'>
  ...
</volume>

* docs/formatstorage.html.in: Document new <volume type=...>.
* docs/schemas/storagevol.rng (vol): Add it to RelaxNG.
* src/conf/storage_conf.h (virStorageVolTypeToString): Declare.
* src/conf/storage_conf.c (virStorageVolTargetDefFormat): Output
the metatype.
(virStorageVolDefParseXML): Parse it, for unit tests.
* tests/storagevolxml2xmlout/vol-*.xml: Update tests to match.
Signed-off-by: NEric Blake <eblake@redhat.com>

$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
  <name>a<b>c</name>

Oops.  That's not valid XML.  And when we fix the XML
generation, it fails RelaxNG validation.

I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place.  But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].

I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.

Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +.  Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').

* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/conf/capabilities.c: Consistently use commas.
* src/conf/domain_conf.c: Likewise.
* src/conf/network_conf.c: Likewise.
* src/conf/storage_conf.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The virStoragePoolDefParseSource method would set def->nhosts
before allocating def->hosts. If the allocation failed due to
OOM, the cleanup code would crash accessing out of bounds.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973