Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year

  commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Sat Oct 6 20:55:31 2018 -0400

    connect: Drop avahi support

    Libvirtd can advertise itself over avahi. The feature is disabled by
    default though and in practice I hear of no one actually using it
    and frankly I don't think it's all that useful

    The 'Open Connection' wizard has a disproportionate amount of code
    devoted to this feature, but I don't think it's useful or worth
    maintaining, so let's drop it

I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.

By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that we added the seclabels to the schema we can test that they are
parsed and formatted correctly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Allow using seclabels the same way as disk images allow it. Currently
the snapshot code copies the seclabels from the original image if no
seclabel is provided. Also there's no code change required as the
snapshot XML parser actually uses parts of the disk parser thus
seclabels are already parsed and formatted and even applied thus this is
just a formalization of our support for this.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

With QEMU versions which lack "unavailable-features" we use CPUID based
detection of features which were enabled or disabled once QEMU starts.
Thus using MSR features with host-model would result in all of them
being marked as disabled in the active domain definition even though
QEMU did not actually disable them.

Let's make sure we add MSR features to host-model only when
"unavailable-features" property is supported by QEMU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Always assume JSON monitor was requested, since all the callers
pass true anyway.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

If we have a monitor, it is a JSON monitor.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

No reason not to be consistent with the user-visible value.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This test case shows that we now reject invalid spapr-vio
addresses.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we no longer use that functionality we can also drop the tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Now that we no longer support testing HMP monitor,
the json field is pointless.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

We return success when running this function for either non-JSON monitor
testing or guest agent testing.

However we no longer test HMP monitor and we do not try to validate
the guest agent interaction.

Drop the test->json check and report a proper error if someone tries
to run this function for the guest agent without properly wiring it up.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The QMP monitor only uses a newline to separate lines,
while HMP and the guest agent also use a carriage return.

In preparation to dropping support for testing HMP interaction,
only skip the carriage return if we're dealing with the guest agent,
removing the need to check the 'json' field.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Update the capabilities from a non-upstream version (9c70209b63 is not
in qemu.git) to qemu upstream commit 33d6099906 (2019/06/18) so that we
get the QMP schema 'features' field support and are able to detect that
the 'file' block backend supports dynamic auto-read-only.

Note that I've rebuilt this on a machine with a more modern kernel and
microcode which exposes e.g. the recent CPU bug mitigations, thus I
opted to keep the CPU changes rather than trying to do a franken-caps
by updating only the output of query-qmp-schema.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

By default query-cpu-model-expansion only reports canonical names of all
CPU features. We do some magic and call the command twice to get all
possible spellings of the features, but being able to consume canonical
names will allow us to drop this magic.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).

The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The way we call query-cpu-model-expansion will rely on some capabilities
bits. Let's make sure all capabilities are set before probing host CPU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We will use it to check whether QEMU supports a specific CPU property.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This should cover all CPU features for which QEMU prefers spelling that
differs from the one used by libvirt.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Newer QEMU will translate the feature names to their canonical names so
4.0.0 is the last one which produces the results we currently have in
*-latest.args.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Normal CPU features use modern -cpu ...,feature=on|off syntax when
available, but kvm features kept using the old +feature or -feature.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

These test check all kvm CPU features that could be passed to the -cpu
option by libvirt.

The 2.7.0 version is the last one for which we use +|-feature syntax for
CPU features, while feature=on|off is used with newer versions. This
is visible in the following patch which changes only the *-latest.args
files.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.

Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: NYi Li <yili@winhong.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

There is a missing empty line between two functions since its
introduction in v1.2.0-rc1~150.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>

Use VIR_AUTO* for cleanup and virBufferCurrentContent instead
of virBufferContentAndReset.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Use VIR_AUTOPTR and get rid of the 'ret' variable.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>

We removed testing for text monitor some time ago, remove
the remains from the test infrastructure.
Signed-off-by: NJán Tomko <jtomko@redhat.com>