CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069

When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.

That said, every API that is going to begin a job should do that before
fetching data from vm->def.

(cherry picked from commit db86da5c)

Conflicts:
	src/qemu/qemu_driver.c - context: no ACLs

While working on v1.0.5-maint (the branch in use on Fedora 19)
with the host at Fedora 20, I got a failure in virstoragetest.
I traced it to the fact that we were using qemu-img to create a
qcow2 file, but qemu-img changed from creating v2 files by
default in F19 to creating v3 files in F20.  Rather than leaving
it up to qemu-img, it is better to write the test to force
testing of BOTH file formats (better code coverage and all).

This patch alone does not fix all the failures in v1.0.5-maint;
for that, we must decide to either teach the older branch to
understand v3 files, or to reject them outright as unsupported.
But for upstream, making the test less dependent on changing
qemu-img defaults is always a good thing.

* tests/virstoragetest.c (testPrepImages): Simplify creation of
raw file; check if qemu supports compat and if so use it.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 974e5914)

Conflicts:
	tests/virstoragetest.c - hardcode test to v2, since this branch doesn't handle v3 correctly

Newer pod (hello rawhide) complains if you attempt to mix bullets
and non-bullets in the same list:

virsh.pod around line 3177: Expected text after =item, not a bullet

As our intent was to nest an inner list, we make that explicit to
keep pod happy.

* tools/virsh.pod (ENVIRONMENT): Use correct pod syntax.

(cherry picked from commit 00d69b4a)

Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const.  Detect this and
define the libvirt libxl event handler signature appropriately.
(cherry picked from commit 43b0ff5b)

Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 9712c251)

Introduced by commit 1daa4ba3. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
(cherry picked from commit 2a3a725c)

The 'stats' variable was not initialized to NULL, so if some
early validation of the RPC call fails, it is possible to jump
to the 'cleanup' label and VIR_FREE an uninitialized pointer.
This is a security flaw, since the API can be called from a
readonly connection which can trigger the validation checks.

This was introduced in release v0.9.1 onwards by

  commit 158ba873
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Apr 13 16:21:35 2011 +0100

    Merge all returns paths from dispatcher into single path
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit e7f400a1)

Conflicts:
	daemon/remote.c - context

Upstream gnulib determined that we were needlessly compiling in
gnulib's regex instead of glibc's when targetting new-enough glibc,
because the m4 test was being too strict in requiring a particular
answer to undefined behavior.
https://lists.gnu.org/archive/html/bug-gnulib/2013-04/msg00032.html

* .gnulib: Update to latest, for regex.

(cherry picked from commit 84243239)

While this update doesn't address any reported problems in libvirt,
doing a post-release update to latest gnulib makes it easier to
stay in sync with best upstream practices.

* .gnulib: Update to latest.
* bootstrap: Resynchronize.

(cherry picked from commit d7468b7d)

The src/lxc/lxc_*_dispatch.h files only had deps on the
RPC generator script & the XDR definition file. So when
the Makefile.am args passed to the generator were change,
the disaptch code was not re-generated. This caused a
build failure

  CC       libvirt_lxc-lxc_controller.o
lxc/lxc_controller.c: In function 'virLXCControllerSetupServer':
lxc/lxc_controller.c:718:47: error: 'virLXCMonitorProcs' undeclared (first use in this function)
lxc/lxc_controller.c:718:47: note: each undeclared identifier is reported only once for each function it appears in
lxc/lxc_controller.c:719:47: error: 'virLXCMonitorNProcs' undeclared (first use in this function)
make[3]: *** [libvirt_lxc-lxc_controller.o] Error 1

For added fun, the generated files were not listed in
CLEANFILES, so only a 'git clean -f' would fix the build
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 0946c5f5)

With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.

To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.
Signed-off-by: NColin Walters <walters@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 922b7fda)

Conflicts:
	src/access/viraccessdriverpolkit.c

Resolution:
  Dropped file that does not exist in this branch.

Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.

It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 979e9c56)

Conflicts:
	src/util/virprocess.c
	src/util/virstring.c
	src/util/virstring.h
	src/rpc/virnetserverclient.c
	src/rpc/virnetsocket.h
	src/util/viridentity.h

Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.

Also, don't report another error if it's -1, since one has already
been reported.

Introduced by 258e06c8.

https://bugzilla.redhat.com/show_bug.cgi?id=981251
(cherry picked from commit 13fde7ce)

If qemuMonitorBlockJob returned 0, qemuDomainBlockPivot
might return 0 even if an error occured.

https://bugzilla.redhat.com/show_bug.cgi?id=977678
(cherry picked from commit c34107df)

If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.

This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.

https://bugzilla.redhat.com/show_bug.cgi?id=975359
(cherry picked from commit 658c932a)

Don't check for '\n' at the end of file if zero bytes were read.

Found by valgrind:
==404== Invalid read of size 1
==404==    at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404==    by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404==    by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404==    by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404==    by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404==    by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)

Introduced by 0d0b4098.

https://bugzilla.redhat.com/show_bug.cgi?id=978356
(cherry picked from commit 306c49ff)

Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.

Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
(cherry picked from commit 1e3a2529)

This should resolve:

  https://bugzilla.redhat.com/show_bug.cgi?id=959191

The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".

(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
(cherry picked from commit 2ea45647)

CVE-2013-1962

remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.
(cherry picked from commit ca697e90)

The controller element supports non-disk controller types too.

https://bugzilla.redhat.com/show_bug.cgi?id=960958
(cherry picked from commit c075f89f)

(cherry picked from commit 413274f6)

Set spice password even if default VNC password hasn't been set.

https://bugzilla.redhat.com/show_bug.cgi?id=953720
(cherry picked from commit 4327df7e)

Don't print the pool option name if it's null.

Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol

After:

virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=924571
(cherry picked from commit 7f913c82)

Since the refactoring in fbe2d494 we call virSecretFree even if
virSecretDefineXML fails, which leads to overwriting the error
message with:
error: Invalid secret: virSecretFree

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=929045
(cherry picked from commit bfb4b822)

When creating a logical volume with virStorageVolCreateXMLFrom,
"qemu-img convert" is called internally if clonevol is a file volume.
Then, vol->target.format is used as output_fmt parameter but the
target.format of logical volumes is always 0 because logical volumes
haven't the volume format type element.

Fortunately, 0 was treated as RAW file format before commit f772b3d9,
so there was no problem. But now, 0 is treated as the type of none,
qemu-img fails with "Unknown file format 'none'".

This patch fixes this issue by treating output block devices as RAW
file format like for input block devices.
Signed-off-by: NAtsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
(cherry picked from commit d369e508)

If the path part of connection URI is not present, cfg is used
unitialized.

https://bugzilla.redhat.com/show_bug.cgi?id=950855
(cherry picked from commit 74bff250)

When building with --without-libvirtd and udev support is detected we
will fail to build with the following error:
    node_device/node_device_udev.c:1608:37: error: unknown type name
        'virStateInhibitCallback'
(cherry picked from commit 52ad612c)

We've already scrubbed for comparisons of 'uid_t == -1' (which fail
on platforms where uid_t is a u16), but another one snuck in.

* src/util/virutil.c (virSetUIDGIDWithCaps): Correct uid comparison.
* cfg.mk (sc_prohibit_risky_id_promotion): New rule.
(cherry picked from commit 7af86379)

My commit 7a2e845a (and its
prerequisites) managed to effectively ignore the
clear_emulator_capabilities setting in qemu.conf (visible in the code
as the VIR_EXEC_CLEAR_CAPS flag when qemu is being exec'ed), with the
result that the capabilities are always cleared regardless of the
qemu.conf setting. This patch fixes it by passing the flag through to
virSetUIDGIDWithCaps(), which uses it to decide whether or not to
clear existing capabilities before adding in those that were
requested.

Note that the existing capabilities are *always* cleared if the new
process is going to run as non-root, since the whole point of running
non-root is to have the capabilities removed (it's still possible to
maintain individual capabilities as needed using the capBits argument
though).
(cherry picked from commit 2639c6320647778c1496008058dde57dfca35b92)

Commit 027bf2ea used the wrong offset: the text field at the start
of the header has 64 bytes, not 68. [1]

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=921452

[1] https://forums.virtualbox.org/viewtopic.php?p=29267#p29267
(cherry picked from commit 6e46477c)

virsh subcommand memtune forgot updating domain live xml
after setting cgroup value.
(cherry picked from commit 0047d5d6)

In some startup failure modes, the fuse thread may get itself
wedged. This will cause the entire libvirt_lxc process to
hang trying to the join the thread. There is no compelling
reason to wait for the thread to exit if the whole process
is exiting, so just daemonize the fuse thread instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit e31f32c6)

Properly check the return value of vshCommandOptStringReq for xmlfile:
* error out on incorrect input (--xmlfile '')
* use default XML <domainsnapshot/> with no --xmlfile specified

(Broken by commit b2e85855)

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=919826
(cherry picked from commit 2fc5ff11)

otherwise we crash with

 #0  virUSBDeviceListFind (list=0x0, dev=dev@entry=0x8193d70) at util/virusb.c:526
 #1  0xb1a4995b in virLXCPrepareHostdevUSBDevices (driver=driver@entry=0x815d9a0, name=0x815dbf8 "debian-700267", list=list@entry=0x81d8f08) at lxc/lxc_hostdev.c:88
 #2  0xb1a49fce in virLXCPrepareHostUSBDevices (def=0x8193af8, driver=0x815d9a0) at lxc/lxc_hostdev.c:261
 #3  virLXCPrepareHostDevices (driver=driver@entry=0x815d9a0, def=0x8193af8) at lxc/lxc_hostdev.c:328
 #4  0xb1a4c5b1 in virLXCProcessStart (conn=0x817d3f8, driver=driver@entry=0x815d9a0, vm=vm@entry=0x8190908, autoDestroy=autoDestroy@entry=false, reason=reason@entry=VIR_DOMAIN_RUNNING_BOOTED)
     at lxc/lxc_process.c:1068
 #5  0xb1a57e00 in lxcDomainStartWithFlags (dom=dom@entry=0x815e460, flags=flags@entry=0) at lxc/lxc_driver.c:1014
 #6  0xb1a57fc3 in lxcDomainStart (dom=0x815e460) at lxc/lxc_driver.c:1046
 #7  0xb79c8375 in virDomainCreate (domain=domain@entry=0x815e460) at libvirt.c:8450
 #8  0x08078959 in remoteDispatchDomainCreate (args=0x81920a0, rerr=0xb65c21d0, client=0xb0d00490, server=<optimized out>, msg=<optimized out>) at remote_dispatch.h:1066
 #9  remoteDispatchDomainCreateHelper (server=0x80c4928, client=0xb0d00490, msg=0xb0d005b0, rerr=0xb65c21d0, args=0x81920a0, ret=0x815d208) at remote_dispatch.h:1044
 #10 0xb7a36901 in virNetServerProgramDispatchCall (msg=0xb0d005b0, client=0xb0d00490, server=0x80c4928, prog=0x80c6438) at rpc/virnetserverprogram.c:432
 #11 virNetServerProgramDispatch (prog=0x80c6438, server=server@entry=0x80c4928, client=0xb0d00490, msg=0xb0d005b0) at rpc/virnetserverprogram.c:305
 #12 0xb7a300a7 in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>, client=<optimized out>, srv=0x80c4928) at rpc/virnetserver.c:162
 #13 virNetServerHandleJob (jobOpaque=0xb0d00510, opaque=0x80c4928) at rpc/virnetserver.c:183
 #14 0xb7924f98 in virThreadPoolWorker (opaque=opaque@entry=0x80a94b0) at util/virthreadpool.c:144
 #15 0xb7924515 in virThreadHelper (data=0x80a9440) at util/virthreadpthread.c:161
 #16 0xb7887c39 in start_thread (arg=0xb65c2b70) at pthread_create.c:304
 #17 0xb77eb78e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130

when adding a domain with a usb device. This is Debian bug

    http://bugs.debian.org/700267
(cherry picked from commit 6082bc27)

This fixes the build on Debian Wheezy which otherwise fails with:

  CC     libvirt_driver_lxc_impl_la-lxc_process.lo
  lxc/lxc_process.c: In function 'virLXCProcessGetNsInode':
  lxc/lxc_process.c:648:5: error: implicit declaration of function 'stat' [-Werror=implicit-function-declaration]
  lxc/lxc_process.c:648:5: error: nested extern declaration of 'stat' [-Werror=nested-externs]
  cc1: all warnings being treated as errors
(cherry picked from commit c8871d8f)

A value which is equal to a integer maximum such as LLONG_MAX is
a valid integer value.

The patch fix the following error:
1, virsh memtune vm --swap-hard-limit -1
2, virsh start vm
In debug mode, it shows error like:
virScaleInteger:1813 : numerical overflow:\
                       value too large: 9007199254740991KiB
(cherry picked from commit b38a040a)

- configure.ac docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: merged in transifex updates for fr,hi,pl,ja,uk,it and
  regenerated

There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng.  It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.

[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023

* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.

Added a picture and explanation describing the virConnectOpen processing
at a "higher" level, but with some source code references.