In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.

Rather than preallocating a set number of elements, then walking through
the extents and adjusting the specific element in place, use the APPEND
macros to handle that chore.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

It's disallowed in the API.

They are disallowed in the pinning API and as default cpuset.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1293241

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.

This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.

Commit id '7bf3198d' neglected to initialize deflate leading to a
possibility if model allocation/checks fail, then the VIR_FREE(deflate)
would be erroneous. Noted by Jan Tomko.

Excessive memory balloon inflation can cause invocation of OOM-killer,
when Linux is under severe memory pressure. QEMU memballoon device
has a feature to release some memory at the last moment before some
process will be get killed by OOM-killer.

Introduce a new optional balloon device attribute 'autodeflate' to
enable or disable this feature.

This new function will add a single controller of the given model,
except the case of ich9-usb-ehci1 (the master controller for a USB2
controller set) in which case a set of related controllers will be
added (EHCI1, UHCI1, UHCI2, UHCI3). These controllers will not be
given PCI addresses, but should be otherwise ready to use.

"-1" is allowed for controller model, and means "default for this
machinetype". This matches the existing practice in
qemuDomainDefPostParse(), which always adds the default controller
with model = -1, and relies on the commandline builder to set a model
(that is wrong, but will be fixed later).

We need a virDomainDefAddController() that doesn't check for an
existing controller at the same index (since USB2 controllers must be
added in sets of 4 that are all at the same index), so rather than
duplicating the code in virDomainDefMaybeAddController(), split it
into two functions, in the process eliminating existing duplicated
code that loops through the controller list by calling
virDomainControllerFind(), which does the same thing).

This way both Domain and Device PostParse functions can act based on the
flags.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This should be a no-op

This should be a no-op

Commit id '70ffa02f' added the data.file.append option to some
VIR_DOMAIN_CHR_TYPE_FILE cases in switch statements allowing the
code to "fall through" for the remainder of the cases. This causes
angst in code profiling tools, like Coverity since there is no break;
followed by more case conditions. Adjust the logic to be more specific
within each case.
Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

For completeness, use the VIR_TRISTATE_SWITCH_ABSENT for data.file.append
comparisons. Commit ids '70ffa02f' and '53a15aed' just went with the non
zero comparison.

This used to return 'unkown' and that was not correct.

A vol-dumpxml now returns:

<volume type='network'>
  <name>image3</name>
  <key>libvirt/image3</key>
  <source>
  </source>
  <capacity unit='bytes'>10737418240</capacity>
  <allocation unit='bytes'>10737418240</allocation>
  <target>
    <path>libvirt/image3</path>
    <format type='raw'/>
  </target>
</volume>

The RBD driver will now error out if a different format than RAW
is provided when creating a volume.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.
Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

This function is no longer used outside domain_addr.c

We only support hotplugging SCSI controllers.
The USB and virtio-serial related code was never reachable because
this function was only called for VIR_DOMAIN_CONTROLLER_TYPE_SCSI
controllers.

This reverts commit ee0d97a7 and parts of commits 16db8d2e
and d6d54cd1.

When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.

When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.

Once more stuff will be moved into the vCPU data structure it will be
necessary to get a specific one in some ocasions. Add a helper that will
simplify this task.

Extract the checking code into a separate function and prepare the
infrastructure for checking the new structure type.

To allow collecting all relevant data at one place let's make def->vcpus
a structure and then we can start moving stuff into it.

Later on this will also be used to track size of the vcpu data array.
Use size_t so that we can utilize the memory allocation helpers.

Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and
reusing it accross libvirt.

The new helper will simplify checking whether the domain config contains
inactive vCPUs.

The code can be unified into the new accessor rather than being
scattered accross the drivers.

Use the local variable rather than getting it all the time from the
struct. This will simplify further refactors.

To support further refactors replace all write access to def->maxvcpus
with a accessor function.

This patch reverts parts of commits 0d8b24f6 and 0785966d dealing with
the addition of a controller during virDomainHostdevAssignAddress. This
caused a regression for the hostdev hotplug path which assumes the
qemuDomainFindOrCreateSCSIDiskController will add the new controller
during qemuDomainAttachHostSCSIDevice to both the running domain and
the domain def controller list when the controller doesn't yet exist
(whether due to no SCSI controllers existing or the addition of a new
controller because existing ones are full).

Since commit id 0d8b24f6 will call virDomainHostdevAssignAddress during
virDomainDeviceDefPostParseInternal which is called either during domain
definition post processing (via an iterator during virDomainDefPostParse)
or directly from virDomainDeviceDefParse during hotplug, the change
broke the "side effect" of being able to add both a hostdev and controller
to the running domain.

The regression would only be seen if the running domain didn't have a
SCSI controller already defined or if the existing SCSI controller was
"full" of devices and a new controller needed to be created.

This patch will also add some extra comments to the code to avoid a
similar future change.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>

Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add xml for the new virtio-input-host-pci device:
<input type='passthrough' bus='virtio'>
  <source evdev='/dev/input/event1234'/>
</input>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114

To be used by the family of virtio input devices:

<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114

qemu 2.5 provides virtio video device.  It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.

Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Allowing to have the extra undefined/default state.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>