Change VIR_ERROR("%s", "..."
to     VIR_ERROR0("..."

and

Change VIR_ERROR("%s", _("...")
to     VIR_ERROR0(_("...")

Use this command:
  git grep -E -l 'VIR_ERROR\("%s", (_\()?"'|xargs perl -pi -e \
  's/VIR_ERROR\("%s", (_\()?"/VIR_ERROR0($1"/'

* src/qemu/qemu_conf.c (qemudParseHelpStr): Fix errors that made
it impossible to diagnose invalid minor and micro version number
components.
Signed-off-by: NChris Wright <chrisw@redhat.com>

* src/qemu/qemu_conf.c (QEMU_VERSION_STR_1, QEMU_VERSION_STR_2):
Define these instead of...
(QEMU_VERSION_STR): ... this.  Remove definition.
(qemudParseHelpStr): Check first for the new, shorter prefix,
"QEMU emulator version", and then for the old one,
"QEMU PC emulator version" when trying to parse the version number.
Based on a patch by Chris Wright.

There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

qemuDomainPCIAddressSetFree was freeing up the hash
table for the pci addresses, but not freeing up the addr
structure.  Looking over the callers of this function, it
seems like they expect it to also free up the structure,
so do that here.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Cygwin has mntent.h but lacks getmntent_r. Update preprocessor
checks to catch this combination.

Adds ability to provide a preferred CPU model for CPUID data decoding.
Such model would be considered as the best possible model (if it's
supported by hypervisor) regardless on number of features which have to
be added or removed for describing required CPU.

So far, when CPUID data were converted into CPU model and features, the
features can only be added to the model. As a result, when a guest asked
for something like "qemu64,-svm" it would get a qemu32 plus a bunch of
additional features instead.

This patch adds support for removing feature from the base model.
Selection algorithm remains the same: the best CPU model is the model
which requires lowest number of features to be added/removed from it.

Qemu committed a patch which list some CPU names in [] when asked for
supported CPUs (qemu -cpu ?). Yet, it needs such CPUs to be passed
without those square braces. When probing for supported CPU models, we
can just strip the square braces and pretend we have never seen them.

Fixes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578347

Disk devices in QEMU have two parts, the guest device and the host
backend driver. Historically these two parts have had the same
"unique" name. With the switch to using -device though, they now
have separate names. Thus when changing CDROM media, for guests
using -device syntax, we need to prepend the QEMU_DRIVE_HOST_PREFIX
constant

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add helper function
  qemuDeviceDriveHostAlias() for building a host backend alias
* src/qemu/qemu_driver.c: Use qemuDeviceDriveHostAlias() to determine
  the host backend alias for performing eject/change commands in the
  monitor

The device_add command was added in JSON mode in a way I didn't
expect. Instead of passing the normal device string to the JSON
command:

    { "execute": "device_add", "arguments": { "device": "ne2k_pci,id=nic.1,netdev=net.1" } }

We need to split up the device string into a full JSON object

    { "execute": "device_add", "arguments": { "driver": "ne2k_pci", "id": "nic.1", "netdev": "net.1" } }

* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Rename the
  qemuCommandLineParseKeywords method to qemuParseKeywords
  and export it to monitor
* src/qemu/qemu_monitor_json.c: Split up device string into
  a JSON object for device_add command

Instead of reporting VIR_ERR_INTERNAL_ERROR use the more specific
VIR_ERR_CONFIG_UNSUPPORTED

* src/qemu/qemu_conf.c: Report VIR_ERR_CONFIG_UNSUPPORTED for
  unsupported video adapters

To avoid race-conditions, the tear down of a filter has to happen before
the tap interface disappears and another tap interface with the same
name can re-appear. This patch tries to fix this. In one place, where
communication with the qemu monitor may fail, I am only tearing the
filters down after knowing that the function did not fail.

I am also moving the tear down functions into an include file for other
drivers to reuse.

* Dan Kenigsberg requested explicit support for the qemu default disk error policy which is enospace

There's no sense in advertising cpuselection capability when host CPU
is not properly detected and advertised in host capabilities.

When qemu libvirt driver doesn't support guest CPU selection with given
qemu binary, guests requiring specific CPU should fail to start instead
of being silently supplied with a default CPU.

Also rename ReportError to macvtapError.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):

1) 'wallclock' is changed to 'track', and the possible values are 'boot'
 (corresponds to old 'host'), 'guest', and 'wall'.

2) 'mode' has an additional value 'smpsafe'

3) when tickpolicy='catchup', there can be an optional sub-element of
   timer called 'catchup':

   <catchup threshold=123 slew=120 limit=10000/>

Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".

* docs/schemas/domain.rng: updated RNG definition to account for changes

* src/conf/domain_conf.h: change the C struct and enums to match changes.

* src/conf/domain_conf.c: timer parse and format functions changed to
                          handle the new selections and new element.

* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*

* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.

virStrToLong* guarantees (via strtol) that the end pointer will be set
to the point at which parsing stopped (even on failure, this point is
the start of the input string).

* src/esx/esx_driver.c (esxGetVersion): Remove pointless
conditional.
* src/qemu/qemu_conf.c (qemuParseCommandLinePCI)
(qemuParseCommandLineUSB, qemuParseCommandLineSmp): Likewise.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetMigrationStatus): Likewise.

Since the timers are defined to cover all possible config cases for
several different hypervisors, many of these possibilities generate an
error on qemu. Here is what is currently supported:

RTC: If the -rtc commandline option is available, allow setting
"clock=host"
     or "clock=vm" based on the rtc timer clock='host|guest' value. Also
     add "driftfix=slew" if the tickpolicy is 'catchup', or add nothing
if
     tickpolicy is 'delay'. (Other tickpolicies will raise an error).

     If -rtc isn't available, but -rtc-td-hack is, add that option
     if the tickpolicy is 'catchup', add -rtc-td-hack, if it is 'delay'
     add nothing, and if it's anything else, raise an error.

PIT: If -no-kvm-pit-reinjection is available, and tickpolicy is
     'delay', add that option. if tickpolicy is 'catchup', do
     nothing. Anything else --> raise an error.

     If -no-kvm-pit-reinjection *isn't* available, but -tdf is, when
     tickpolicy is 'catchup' add -tdf. If it's 'delay', do
     nothing. Anything else --> raise an error.

     If neither of those commandline options is available, and
     tickpolicy is anything other than 'delay' (or unspecified), raise
     an error.

HPET: If -no-hpet flag is available and present='no', add -no-hpet.
      If -no-hpet is not available, and present='yes', raise an error.
      If present is unspecified, the default is to do whatever this
      particular qemu does by default, so don't raise an error.

All other timer types are unsupported by QEMU, so they will raise an
error.

* src/qemu/qemu_conf.c: extend qemuBuildClockArgStr() to generate the
  command line arguments for the new options

* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
                        features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test

* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag

Add support for Qemu to have firewall rules applied and removed on VM
startup and shutdown respectively. This  patch also provides support for
the updating of a filter that causes all VMs that reference the filter
to have their ebtables/iptables rules updated.
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>

To find out where the net type 'direct' needs to be handled I introduced
the 'enum virDomainNetType' in the virDomainNetDef structure and let the
compiler tell me where the case statement is missing. Then I added the
unhandled device statement to the UML driver.

* src/conf/domain_conf.h: change _virDomainNetDef type from int to
  virDomainNetType enum
* src/conf/domain_conf.c src/lxc/lxc_driver.c src/qemu/qemu_conf.c
  src/uml/uml_conf.c: make sure all enum cases are properly handled
  in switches

Before, this function would blindly accept an invalid def->dst
and then abuse the idx=-1 it would get from virDiskNameToIndex,
when passing it invalid strings like "xvda:disk" and "sda1".
Now, this function returns -1 upon failure.
* src/conf/domain_conf.c (virDomainDiskDefAssignAddress): as above.
Update callers.
* src/conf/domain_conf.h: Update prototype.
* src/qemu/qemu_conf.c: Update callers.

Attempt to turn on vhost-net mode for devices of type NETWORK, BRIDGE,
and DIRECT (macvtap).

* src/qemu/qemu_conf.h: add vhostfd to qemuBuildHostNetStr prototype
  add qemudOpenVhostNet prototype new flag to set when :,vhost=" found in
  qemu help
* src/qemu/qemu_conf.c: * set QEMUD_CMD_FLAG_VNET_HOST is ",vhost=" found
  in qemu help
   - qemudOpenVhostNet - opens /dev/vhost-net to pass to qemu if everything
     is in place to use it.
   - qemuBuildHostNetStr - add vhostfd to commandline if it's not empty
     (higher levels decide whether or not to fill it in)
   - qemudBuildCommandLine - if /dev/vhost-net is successfully opened, add
     its fd to tapfds array so it isn't closed on qemu exec, and populate
     vhostfd_name to be passed in to commandline builder.
* src/qemu/qemu_driver.c: add filler 0 for new arg to qemuBuildHostNetStr,
  along with a note that this must be implemented in order for hot-plug of
  vhost-net virtio devices to work properly (once qemu "netdev_add" monitor
  command is implemented).

* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks
  and also parse it back in qemuParseCommandLineDisk()
* tests/qemuxml2argvtest.c
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml:
  add a specific regression test

A few more non-literal format strings in error log messages have crept
in. Fix them in the standard way - turn the format string into "%s"
with the original string as the arg.

A number of the error messages raised when parsing USB devices
refered to PCI devices by mistake

* src/qemu/qemu_conf.c: s/PCI/USB/ in qemuParseCommandLineUSB()

Allow an arbitrary timezone with QEMU by setting the $TZ environment
variable when launching QEMU

* src/qemu/qemu_conf.c: Set TZ environment variable if a timezone
  is requested
* tests/qemuxml2argvtest.c: Add test case for timezones
* tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml,
  tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data
  for timezone tests

This allows QEMU guests to be started with an arbitrary clock
offset

The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
  if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
  qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
  qemuxml2argvtest.c: Test case, except we can't actually enable
  it yet.

The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
  virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
  and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
  src/xen/xm_internal.c: Updated to use new structure for localtime

* src/qemu/qemu_conf.c (qemudNetworkIfaceConnect): Remove extraneous
virSaveLastError call, whose result was unused.

ACPI feature bit dropped: I asked internally if the -no-acpi option
had any meaning for IA64, and was told 'probably not'.

This patch adds the mac_filter support to the macvtap device.