NWFilters can be provided name-value pairs using the following
XML notation:

      <filterref filter='xyz'>
        <parameter name='PORT' value='80'/>
        <parameter name='VAL' value='abc'/>
      </filterref>

The internal representation currently is so that a name is stored as a
string and the value as well. This patch now addresses the value part of it
and introduces a data structure for storing a value either as a simple
value or as an array for later support of lists.

This patch adjusts all code that was handling the values in hash tables
and makes it use the new data type.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch adds several aspects of documentation about the network filtering
system:

- chains, chains' priorities and chains' default priorities
- talks about lists of elements, i.e., a variable assigned multiple values
  (part of already ACK-ed series)
- already mentions the vlan, stp and mac chains added later on
  (https://www.redhat.com/archives/libvir-list/2011-October/msg01238.html)
- mentions limitations of vlan filtering (when sent by VM) on Linux systems
 

Add test case for the chain names with known prefixes and the chain
priority.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

The previous patch extends the priority of filtering rules into negative
numbers. We now use this possibility to interleave the jumping into
chains with filtering rules to for example create the 'root' table of
an interface with the following sequence of rules:

Bridge chain: libvirt-I-vnet0, entries: 6, policy: ACCEPT
-p IPv4 -j I-vnet0-ipv4
-p ARP -j I-vnet0-arp
-p ARP -j ACCEPT 
-p 0x8035 -j I-vnet0-rarp
-p 0x835 -j ACCEPT 
-j DROP 

The '-p ARP -j ACCEPT' rule now appears between the jumps.
Since the 'arp' chain has been assigned priority -700 and the 'rarp'
chain -600, the above ordering can now be achieved with the following
rule:

  <rule action='accept' direction='out' priority='-650'>
    <mac protocolid='arp'/>
  </rule>

This patch now sorts the commands generating the above shown jumps into
chains and interleaves their execution with those for generating rules.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

So far rules' priorities have only been valid in the range [0,1000].
Now I am extending their priority into the range [-1000, 1000] for subsequently
being able to sort rules and the access of (jumps into) chains following
priorities.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch enables chains that have a known prefix in their name.
Known prefixes are: 'ipv4', 'ipv6', 'arp', 'rarp'. All prefixes
are also protocols that can be evaluated on the ebtables level.

Following the prefix they will be automatically connected to an interface's
'root' chain and jumped into following the protocol they evaluate, i.e.,
a table 'arp-xyz' will be accessed from the root table using

ebtables -t nat -A <iface root table> -p arp -j I-<ifname>-arp-xyz

thus generating a 'root' chain like this one here:

Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT
-p IPv4 -j O-vnet0-ipv4
-p ARP -j O-vnet0-arp
-p 0x8035 -j O-vnet0-rarp
-p ARP -j O-vnet0-arp-xyz
-j DROP 

where the chain 'arp-xyz' is accessed for filtering of ARP packets.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch extends the filter XML to support priorities of chains
in the XML. An example would be:

<filter name='allow-arpxyz' chain='arp-xyz' priority='200'>
[...]
</filter>

The permitted values for priorities are [-1000, 1000].
By setting the priority of a chain the order in which it is accessed
from the interface root chain can be influenced.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Use the name of the chain rather than its type index (enum).
This pushes the later enablement of chains with user-given names
into the XML parser. For now we still only allow those names that
are well known ('root', 'arp', 'rarp', 'ipv4' and 'ipv6').
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Use scripts for the renaming and cleaning up of chains. This allows us to get
rid of some of the code that is only capable of renaming and removing chains
whose names are hardcoded.

A shell function 'collect_chains' is introduced that is given the name
of an ebtables chain and then recursively determines the names of all
chains that are accessed from this chain and its sub-chains using 'jumps'.

The resulting list of chain names is then used to delete all the found
chains by first flushing and then deleting them.

The same function is also used for renaming temporary filters to their final
names.

I tested this with the bash and dash as script interpreters.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Use the previously introduced chain priorities to sort the chains for access
from an interface's 'root' table and have them created in the proper order.
This gets rid of a lot of code that was previously creating the chains in a 
more hardcoded way.

To determine what protocol a filter is used for evaluation do prefix-
matching, i.e., the filter 'arp' is used to filter for the 'arp' protocol,
'ipv4' for the 'ipv4' protocol and 'arp-xyz' will also be used to filter
for the 'arp' protocol following the prefix 'arp' in its name.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

For better handling of the sorting of chains introduce an internally used
priority. Use a lookup table to store the priorities. For now their actual
values do not matter just that the values cause the chains to be properly
sorted through changes in the following patches. However, the values are
chosen as negative so that once they are sorted along with filtering rules
(whose priority may only be positive for now) they will always be instantiated
before them (lower values cause instantiation before higher values). This
is done to maintain backwards compatibility.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Add a function to the virHashTable for getting an array of the hash table's
key-value pairs and have the keys (optionally) sorted.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit

Support creation of macvlan devices for LXC containers. Do not
allow setting of bandwidth controls or vport profiles due to the
complication that there is no host side visible device to work
with.

* src/lxc/lxc_driver.c: Support type=direct interfaces

Update virNetDevMacVLanCreateWithVPortProfile to allow creation
of plain macvlan devices, as well as macvtap devices. The former
is useful for LXC containers

* src/qemu/qemu_command.c: Explicitly request a macvtap device
* src/util/virnetdevmacvlan.c, src/util/virnetdevmacvlan.h: Add
  new flag to allow switching between macvlan and macvtap
  creation

The current lxcSetupInterfaces() method directly performs setup
of the bridge devices. Since it will shortly need to also create
macvlan devices, move the bridge related code into a separate
method

* src/lxc/lxc_driver.c: Split lxcSetupInterfaces() to create a
  new lxcSetupInterfaceBridge()

The virDomainNetGetActualBridgeName and virDomainNetGetActualDirectDev
methods both return strings that point to data in the virDomainDefPtr
struct, and should therefore not be freed. The return values should
thus be 'const char *' not 'char *'.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Mark const
* src/network/bridge_driver.c: Update to use a const char *

Fix ordering of symbols after re-arranging network device
management API source files

* src/libvirt_private.syms: Fix ordering

Move the ifaceMacvtapLinkDump and ifaceGetNthParent functions
into virnetdevvportprofile.c since they are specific to that
code. This avoids polluting the headers with the Linux specific
netlink data types

* src/util/interface.c, src/util/interface.h: Move
  ifaceMacvtapLinkDump and ifaceGetNthParent functions and delete
  remaining file
* src/util/virnetdevvportprofile.c: Add ifaceMacvtapLinkDump
  and ifaceGetNthParent functions
* src/network/bridge_driver.c, src/nwfilter/nwfilter_gentech_driver.c,
  src/nwfilter/nwfilter_learnipaddr.c, src/util/virnetdevmacvlan.c:
  Remove include of interface.h

Move virNetDevIsVirtualFunction, virNetDevGetVirtualFunctionIndex
and virNetDevGetPhysicalFunction to virnetdev.c

* src/util/interface.c, src/util/interface.h, src/util/virnetdev.c,
  src/util/virnetdev.h: Move APIs

Rename ifaceIsVirtualFunction to virNetDevIsVirtualFunction,
ifaceGetVirtualFunctionIndex to virNetDevGetVirtualFunctionIndex
and ifaceGetPhysicalFunction to virNetDevGetPhysicalFunction

* src/util/interface.c, src/util/interface.h: Rename APIs
* src/util/virnetdevvportprofile.c: Update for API rename

* src/util/interface.c, src/util/interface.h: Remove virNetDevValidateConfig
* src/util/virnetdev.c, src/util/virnetdev.h: Add virNetDevValidateConfig

Rename the ifaceCheck method to virNetDevValidateConfig and change
so that it always raises an error and returns -1 on error.

* src/util/interface.c, src/util/interface.h: Rename ifaceCheck
  to virNetDevValidateConfig
* src/nwfilter/nwfilter_gentech_driver.c,
  src/nwfilter/nwfilter_learnipaddr.c: Update for API rename

Move the virNetDevGetIPv4Address function to virnetdev.c

* util/interface.c, util/interface.h: Remove virNetDevGetIPv4Address
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIPv4Address

To match up with the existing virNetDevSetIPv4Address, rename
ifaceGetIPAddress to virNetDevGetIPv4Address

* util/interface.h, util/interface.c: Rename API
* network/bridge_driver.c: Update for API rename

Move virNetDevGetIndex & virNetDevGetVLanID to virnetdev.c to
suit their functional purpose

* util/interface.c, util/interface.h: Remove virNetDevGetIndex &
  virNetDevGetVLanID
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIndex &
  virNetDevGetVLanID

Rename the ifaceGetIndex method to virNetDevGetIndex and
ifaceGetVlanID to virNetDevGetVLanID. Also change the error
reporting behaviour to always raise errors and return -1 on
failure

* util/interface.c, util/interface.h: Rename ifaceGetIndex
  and ifaceGetVLAN
* nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_learnipaddr.c,
  nwfilter/nwfilter_learnipaddr.c, util/virnetdevvportprofile.c: Update
  for API renames and error handling changes

Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong

* util/interface.c, util/interface.h: Remove
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress

Rename ifaceReplaceMacAddress to virNetDevReplaceMacAddress
and ifaceRestoreMacAddress to virNetDevRestoreMacAddress.

* util/interface.c, util/interface.h, util/virnetdevmacvlan.c:
  Rename APIs

Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong

* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
  and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
  virNetDevMacVLanCreate and virNetDevMacVLanDelete

Rename ifaceMacvtapLinkAdd to virNetDevMacVLanCreate and
ifaceLinkDel to virNetDevMacVLanDelete. Strictly speaking
the latter isn't restricted to macvlan devices, but that's
the only use libvirt has for it.

* util/interface.c, util/interface.h,
  util/virnetdevmacvlan.c: Rename APIs

Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile

To make way for renaming the other macvlan creation APIs in
interface.c

* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
  qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
  Rename APIs

Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers

* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
  Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
  src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
  paths & remove conditional compilation

In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns

  virNetDevMacVLanXXXXX     - macvlan/macvtap interface management
  virNetDevVPortProfileXXXX - virtual port profile management

* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_command.h,
  src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
  src/qemu/qemu_process.h: Update for renamed APIs

Add routines to generate -numa QEMU command line option based on
<numa> ... </numa> XML specifications.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>

This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:

<cpu>
        ...
        <topology sockets='2' cores='4' threads='2'/>
        <numa>
                <cell cpus='0-7' memory='512000'/>
                <cell cpus='8-15' memory='512000'/>
        </numa>
        ...
</cpu>
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>

For whatever reason, the kernel allows you to create a regular
file named /dev/sdc.12345; although this file will disappear the
next time devtmpfs is remounted.  If you let libvirt generate
the name of the external snapshot for a disk image originally
using the block device /dev/sdc, then the domain will be rendered
unbootable once the qcow2 file is lost on the next devtmpfs
remount.  In this case, the user should have used 'virsh
snapshot-create --xmlfile' or 'virsh snapshot-create-as --diskspec'
to specify the name for the qcow2 file in a sane location, rather
than relying on libvirt generating a name that is most likely to
be wrong.  We can help avoid naive mistakes by enforcing that
the user provide the external name for any backing file that is
not a regular file.

* src/conf/domain_conf.c (virDomainSnapshotAlignDisks): Only
generate names if backing file exists as regular file.
Reported by MATSUDA Daiki.

I missed adding virNetServerGetDBusConn() to libvirtd_private.syms
in commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7

libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'

As noted by Daniel Berrange [1], the proper fix for the older
PolicyKit build issue is to add virNetServerGetDBusConn to
libvirt_private.syms.  Revert unnecessary changes to
daemon/Makefile.am

[1] https://www.redhat.com/archives/libvir-list/2011-November/msg00852.html