* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Fix spacing.

* src/qemu/qemu_driver.c (qemudGetProcessInfo): Clean up.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/xen/sexpr.c (_string2sexpr): Likewise.

I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML.  This would allow vendor
extensions of specific devices.  The patch includes a test for the new
attributes as well.

Patrick Dignan

* src/uml/uml_driver.c (umlMonitorCommand): Validate that enough
bytes were read to dereference both res.length, and that many
bytes from res.data.
Reported by Soren Hansen.

* src/nwfilter/nwfilter_driver.c (nwfilterLog): Delete.
(nwfilterDriverStartup): Use virReportOOMError instead.

node_device/node_device_driver.c: In function 'nodeDeviceVportCreateDelete':
node_device/node_device_driver.c:423: error: implicit declaration of function 'stat' [-Wimplicit-function-declaration]

* src/node_device/node_device_driver.c (includes): Add <sys/stat.h>.

Doing `virsh schedinfo rhel5u3 --cap 65535' the hypervisor does the
call, but does not change the value nor raise an error. Best is just to
consider it's not in the allowed values. The problem is that the error
won't be output since the xend driver will then be called and raise an
error

    error: this function is not supported by the hypervisor: unsupported
    in xendConfigVersion < 4

which will override the useful information from
xenUnifiedDomainSetSchedulerParameters(). So best is to also invert the
order in which the xen sub-drivers are called.

* src/xen/xen_hypervisor.c: mark 65535 cap value as out of bound
* src/xen/xen_hypervisor.c: reverse the order of the calls to the xen
  sub drivers to get the error message if needed

Some kernels, such as the one used in RHEL-5, have vport_create and
vport_delete operation files in /sys/class/scsi_host/hostN directory
instead of /sys/class/fc_host/hostN. Let's check both paths for
compatibility reasons.

This also removes unnecessary '/' characters from sysfs paths containing
LINUX_SYSFS_FC_HOST_PREFIX.

NodeDeviceCreateXML and NodeDeviceDestroy methods added for NPIV were
using the wrong privateData field for the remote driver. This doesn't
impact KVM, since the remote driver handles everything, thus
privateData == devMonPrivateData. It does impact Xen though, because
the remote driver only handles a subset of methods and thus
privateData != devMonPrivateData.

In case an optional object cannot be found the lookup function is
left early and the cleanup code is not executed.

This pattern occurs in some other functions too.

The current version of the qemu managed save implementation
is subject to a race where the domain shuts down between
the time that we start the command and the time that we
actually try to do the save.  Close this race by making
qemuDomainSaveFlags() expect both the driver and the passed-in
vm object to be locked before executing.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Add documentation for features added a while ago.

* docs/formatdomain.html.in (Time keeping): Update documentation
of <clock> element to match 0.8.0 addition.

Fixing a problem in the build on cygwin due to missing #define's.

This also makes the message consistent with the message used in error
path of qemudDomainAttachHostPciDevice.

When reconnecting to existing VMs, we re-reserved only those PCI
addresses which were explicitly mentioned in domain XML. Since some
addresses are always reserved (e.g., 0:0:0 and 0:0:1), we need to handle
those too.

Also all this should only be done if device flag is supported by qemu.

* src/security/virt-aa-helper.c: Add missing include.

In this patch I am extending and fixing the nwfilter module's reload support to stop all ongoing threads (for learning IP addresses of interfaces) and rebuild the filtering rules of all interfaces of all VMs when libvirt is started. Now libvirtd rebuilds the filters upon the SIGHUP signal and libvirtd restart.

About the patch: The nwfilter functions require a virConnectPtr. Therefore I am opening a connection in qemudStartup, which later on needs to be closed outside where the driver lock is held since otherwise it ends up in a deadlock due to virConnectClose() trying to lock the driver as well.

I have tested this now for a while with several machines running and needing the IP address learner thread(s). The rebuilding of the firewall rules seems to work fine following libvirtd restart or a SIGHUP. Also the termination of libvirtd worked fine.

* .gnulib: Update to latest.
Reported by Matthias Bolte.

floppy0.present defaults to true. Therefore, it needs to be
explicitly set to false when the XML config doesn't specify the
corresponding floppy device.

Also update tests accordingly.

I changed virStorage[Open|Close] to virVIOSDriver[Open|Close] so
the network driver can use it - since the network driver deals
with Open/Close in the same way.

This patch does two things:

 * It makes umlConnectTapDevice ask brAddTap for a persistent tap by
   passing it a NULL tapfd argument.
 * Stops umlConnectTapDevice from immediately dismantling the bridge
   it just set up.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

When passing a NULL tapfd argument to brAddTap, we need to close the fd
of the tap device. If we don't, libvirt will keep the fd open
indefinitely and renders the the guest unable to configure its side of
the tap device.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

If umlBuildCommandLineChr fails (e.g. due to an unsupported chardev
type), it returns NULL. umlBuildCommandLine does not check for this and
sets this as an argument on the comand line, effectively ending the
argument list. This patch checks for this case and sets the chardev to
"none".
Signed-off-by: NSoren Hansen <soren@linux2go.dk>

When sniffing the network traffic, discard class D and E IP addresses when sniffing traffic. This was a reason why filters were not correctly rebuilt on VMs on the local 192.* network when libvirt was restarted and those VMs did not use a DHCP request to get its IP address.

While testing the SIGHUP handling and reloading of the nwfilter driver, I found that when the filters are rebuilt and mutlipe threads handled the individual interfaces, concurrently running multiple external bash scripts causes strange failures even though the executed ebtables commands are working on different tables for different interfaces. I cannot say for sure where the concurrency problems are caused, but introducing this lock definitely helps.

Since the qemu process is running as qemu:qemu, it can't actually
look at the unix socket in /var/run/libvirt/qemu which is owned by
root and has permission 700.  Move the unix socket to
/var/lib/libvirt/qemu, which is already owned by qemu:qemu.

Thanks to Justin Clift for test this out for me.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The problem is that on the source of the migration, libvirtd
is responsible for creating the unix socket over which the data
will flow.  Since libvirtd is running as root, this file will
be created as root.  When the qemu process running as qemu:qemu
goes to access the unix file to write data to it, it will get
permission denied and fail.  Make sure to change the owner
of the unix file to qemu:qemu.

Thanks to Justin Clift for testing this patch out for me.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

This patch fixes a couple of complaints from valgrind when tickling libvirtd with SIGHUP.

The first two files contain fixes for memory leaks. The 3rd one initializes an uninitialized variable. The 4th one is another memory leak.

 Basically a followup of the previous patch about balloon desactivation
if desactivated, to not ask for balloon information to qemu as we will
just get an error back.
 This can make a huge difference in the time needed for domain
information or list when a machine is loaded, and balloon has been
desactivated in the guests.

* src/qemu/qemu_driver.c: do not get the balloon info if the balloon
  suppor is disabled

--dhcp-no-override description from dnsmasq man page:

      Disable  re-use  of  the  DHCP servername and filename fields as
      extra option space. If it can, dnsmasq moves the boot server and
      filename  information  (from  dhcp-boot)  out of their dedicated
      fields into DHCP options. This make extra space available in the
      DHCP  packet  for options but can, rarely, confuse old or broken
      clients. This flag forces "simple and safe" behaviour  to  avoid
      problems in such a case.

It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.

For parsing try to match by datastore mount path first, if that
fails fallback to /vmfs/volumes/<datastore>/<path> parsing. This
also fixes problems with GSX on Windows. Because GSX on Windows
doesn't use /vmfs/volumes/ style file names.

For formatting use the datastore mount path too, instead of using
/vmfs/volumes/<datastore>/<path> as fixed format.

We add --dhcp-lease-max=xxx argument when network->def->nranges > 0 but
we only allocate space for in the opposite case :-) I guess we are lucky
enough to miscount somewhere else so that we actually allocate more
space than we need since no-one has hit this bug so far.

Introduce esxVMX_Context containing functions pointers to
glue both parts together in a generic way.

Move the ESX specific part to esx_driver.c.

This is a step towards making the VMX code reusable in a
potential VMware Workstation and VMware Player driver.

  The balloon device is automatically added to qemu guests if supported,
but it may be useful to desactivate it. The simplest to not change the
existing behaviour is to allow
  <memballoon type="none"/>
as an extra option to desactivate it (it is automatically added if the
memballoon construct is missing for the domain).
The following simple patch just adds the extra option and does not
change the default behaviour but avoid creating a balloon device if
type="none" is used.

* docs/schemas/domain.rng: add the extra type attribute value
* src/conf/domain_conf.c src/conf/domain_conf.h: add the extra enum
  value
* src/qemu/qemu_conf.c: if enum is NONE, don't activate the device,
  i.e. don't pass the args to qemu/kvm