If we failed to build the aliases or attach the chardev, then the props
would be leaked - fix that.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust error path logic to make it clearer how to undo the failed add.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust error path logic to make it clearer how to undo the failed add.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust error path logic to make it clearer how to undo the failed add.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than take username and password as parameters, now take
a qemuDomainSecretInfoPtr and decode within the function.

NB: Having secinfo implies having the username for a plain type
    from a successful virSecretGetSecretString
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Similar to the qemuDomainSecretDiskPrepare, generate the secret
for the Hostdev's prior to call qemuProcessLaunch which calls
qemuBuildCommandLine. Additionally, since the secret is not longer
added as part of building the command, the hotplug code will need
to make the call to add the secret in the hostdevPriv.

Since this then is the last requirement to pass a virConnectPtr
to qemuBuildCommandLine, we now can remove that as part of these
changes. That removal has cascading effects through various callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modeled after the qemuDomainDiskPrivatePtr logic, create a privateData
pointer in the _virDomainHostdevDef to allow storage of private data
for a hypervisor in order to at least temporarily store auth/secrets
data for usage during qemuBuildCommandLine.

NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the auth/secret data, there's no need to add
code to handle this new structure there.

Updated copyrights for modules touched. Some didn't have updates in a
couple years even though changes have been made.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than needing to pass the conn parameter to various command
line building API's, add qemuDomainSecretPrepare just prior to the
qemuProcessLaunch which calls qemuBuilCommandLine. The function
must be called after qemuProcessPrepareHost since it's expected
to eventually need the domain masterKey generated during the prepare
host call. Additionally, future patches may require device aliases
(assigned during the prepare domain call) in order to associate
the secret objects.

The qemuDomainSecretDestroy is called after the qemuProcessLaunch
finishes in order to clear and free memory used by the secrets
that were recently prepared, so they are not kept around in memory
too long.

Placing the setup here is beneficial for future patches which will
need the domain masterKey in order to generate an encrypted secret
along with an initialization vector to be saved and passed (since
the masterKey shouldn't be passed around).

Finally, since the secret is not added during command line build,
the hotplug code will need to get the secret into the private disk data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a new private structure to hold qemu domain auth/secret data.
This will be stored in the qemuDomainDiskPrivate as a means to store the
auth and fetched secret data rather than generating during building of
the command line.

The initial changes will handle the current username and secret values
for rbd and iscsi disks (in their various forms). The rbd secret is
stored as a base64 encoded value, while the iscsi secret is stored as
a plain text value. Future changes will store encoded/encrypted secret
data as well as an initialization vector needed to be given to qemu
in order to decrypt the encoded password along with the domain masterKey.
The inital assumption will be that VIR_DOMAIN_SECRET_INFO_PLAIN is
being used.

Although it's expected that the cleanup of the secret data will be
done immediately after command line generation, reintroduce the object
dispose function qemuDomainDiskPrivateDispose to handle removing
memory associated with the structure for "normal" cleanup paths.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introducing keepalive_interval = -1 breaks to augeas lens. Fix the lens
by allowing signed ints in the regular expression.

After killing one of the conditionals it's now guaranteed to have
@drivealias populated when calling the monitor, so the code attempting
to cleanup can be simplified.

Code was obsoleted by using -device.

Commit 98c5c53d partially reverted the effort to use typecasted enums
for compiler notification. Turn it back.

At that point the perf events struct should not be allocated so there's
no use in clearing it.

For strange reasons if a perf event type was not supported or failed to
be enabled at VM start libvirt would ignore the failure.

On the other hand on restart if the event could not be re-enabled
libvirt would fail to reconnect to the VM and kill it.

Both don't make really sense. Fix it by failing to start the VM if the
event is not supported and change the event to disabled if it can't be
reconnected (unlikely).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329045

The label is used only for the error path, thus rename cleanup.

Reject the VM startup if the perf event structure can't be allocated.

Since the field is internal to libvirt we can allow the users to modify
it.

Both disk->src->shared and disk->src->readonly can't be modified when
changing disk source for floppy and cdrom drives since both arguments
are passed as arguments of the disk rather than the image in qemu.

Historically these fields have only two possible values since they are
represented as XML thus we need to ignore if user did not provide them
and thus we are treating them as false.

disk->dst represents the <target> element in the XML.

If qemu doesn't support DEVICE_TRAY_MOVED event the code that attempts
to change media would attempt to re-eject the tray even if it wouldn't
be notified when the tray opened. Add a capability bit and skip retrying
for old qemus.

Empty floppy drives start with tray in "open" state and libvirt did not
refresh it after startup. The code that inserts media into the tray then
waited until the tray was open before inserting the media and thus
floppies could not be inserted.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326660

These are wrappers over virStreamRecv and virStreamSend so that
users have to care about nothing but writing data into / reading
data from a sink (typically a file). Note, that these wrappers
are used exclusively on client side as the daemon has slightly
different approach. Anyway, the wrappers allocate this buffer and
use it for intermediate data storage until the data is passed to
stream to send, or to the client application. So far, we are
using 64KB buffer. This is enough, but suboptimal because server
can send messages up to VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX bytes
big (262120B, roughly 256KB). So if we make the buffer this big,
a single message containing the data is sent instead of four,
which is current situation. This means lower overhead, because
each message contains a header which needs to be processed, each
message is processed roughly same amount of time regardless of
its size, less bytes need to be sent through the wire, and so on.
Note that since server will never sent us a stream message bigger
than VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX there's no point in
sizing up the client buffer past this threshold.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are two functions on the client that handle incoming stream
data.  The first one virNetClientStreamQueuePacket() is a low
level function that just processes the incoming stream data from
the socket and stores it into an internal structure. This happens
in the client event loop therefore the shorter the callbacks are,
the better. The second function virNetClientStreamRecvPacket()
then handles copying data from internal structure into a client
provided buffer.
Change introduced in this commit makes just that: new queue for
incoming stream packets is introduced. Then instead of copying
data into intermediate internal buffer and then copying them into
user buffer, incoming stream messages are queue into the queue
and data is copied just once - in the upper layer function
virNetClientStreamRecvPacket(). In the end, there's just one
copying of data and therefore shorter event loop callback. This
should boost the performance which has proven to be the case in
my testing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit d9c9e138.

Unfortunately, things are going to be handled differently so this
commit must go.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The man page says: "(Re)-Connect to the hypervisor. When the shell is
first started, this is automatically run with the URI parameter
requested by the "-c" option on the command line."  However, if you run:

  virsh -c 'test://default' 'connect; uri'

the output will not be 'test://default'.  That's because the 'connect'
command does not care about any virsh-only related settings and if it is
run without parameters, it connects with @uri == NULL.  Not only that
doesn't comply to what the man page describes, but it also doesn't make
sense.  It also means you aren't able to reconnect to whatever you are
connected currently.

So let's fix that in both virsh and virt-admin add a test case for it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

* docs/news.html.in libvirt.spec.in: update for release
* po/*.po* : regenerated