In cgroups v2 when a new group is created by default no controller is
enabled so the detection code will not detect any controllers.

When enabling the controllers we should also store them for the group.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

When creating new group for cgroups v2 the we cannot check
cgroups.controllers for that cgroup because the directory is created
later.  In that case we should check cgroups.subtree_control of parent
group to get list of controllers enabled for child cgroups.

In order to achieve that we will prefer the parent group if it exists,
the current group will be used only for root group.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

The virsh-optparse test broke after commit 6ac402c4 because it
always assumed the max memory limit can be adjusted on a running domain
which used to be the case in the old code.
This is only a hot fix for the CI build. The proper fix here is to
re-write the whole test in a self-test/unit-test manner where we only
test virsh's ability to parse various values, not running actual
commands.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

When commit 6ac402c4 added the API whenever VIR_DOMAIN_MEM_MAXIMUM
was passed the code always checked whether the domain was active and
therefore failed with an error even though only a config change was
requested. Fix the issue by replacing virDomainObjGetOneDef with
virDomainObjGetOneDefState which tells us what definition we're
performing the change on.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Commit d5572f62 forgot to add maxthreads to the non-Linux definition
of the function, thus breaking the MinGW build.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Changes noticed while copying to similar aspects of checkpoints.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Any message that is easy to trigger (as evidenced by the testsuite
update) should not use 'internal error' as its category.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

virDomainSnapshotFindByName(list, NULL) should return NULL, rather
than the internal-use-only metaroot.  Most existing callers pass in a
non-NULL name; the few external callers that don't are immediately
calling virDomainMomentSetParent (which indeed needs the metaroot
rather than NULL if the parent name is NULL); but as the leaky
abstraction is ugly, it is worth instead making
virDomainMomentSetParent static and adding a new function for
resolving the parent link of a brand new moment within its list.  The
existing external uses of virDomainMomentSetParent always succeed
(either the new moment has parent_name of NULL to become a new root,
or has parent_name set to a strdup of the previous current moment);
hence, our new function does not need a return value (but it still has
a VIR_WARN in case future uses break our assumptions about failure
being impossible).

Missed when commit 02c4e24d refactored things to attempt to remove
direct metaroot manipulations out of the qemu and test drivers into
internal-only details, and made more obvious when commit dc8d3dc6
factored it out into a separate file.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Some VM configurations may result in a large number of threads created by
the associated qemu process which can exceed the system default limit. The
maximum number of threads allowed per process is controlled by the pids
cgroup controller and is set to 16k when creating VMs with systemd's
machined service. The maximum number of threads per process is recorded
in the pids.max file under the machine's pids controller cgroup hierarchy,
e.g.

$cgrp-mnt/pids/machine.slice/machine-qemu\\x2d1\\x2dtest.scope/pids.max

Maximum threads per process is controlled with the TasksMax property of
the systemd scope for the machine. This patch adds an option to qemu.conf
which can be used to override the maximum number of threads allowed per
qemu process. If the value of option is greater than zero, it will be set
in the TasksMax property of the machine's scope after creating the machine.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Update the current or max memory, on the persistent or live definition
depending on the flags which are currently ignored.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Make the test driver only support the VIR_TYPED_PARAM_STRING flag for
now.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

If the dup2 fails, then we aren't going to get the correct result.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Avoid the chance that sysconf(_SC_OPEN_MAX) returns -1 and thus
would cause virBitmapNew would attempt to allocate a very large
bitmap.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Avoid the chance that qemuMonitorTestNewSimple could return NULL

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

It's already dereffed in the initialization and shouldn't be NULL
unless virJSONValueArraySize after a virJSONValueObjectGetArray
could return a NULL data entry.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Ever since --parallel-connections option for virsh migrate was
introduced we did not properly check the return value of
vshCommandOptInt. We would set VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS
parameter even if vshCommandOptInt returned 0 (which means
--parallel-connections was not specified) when another int option which
was checked earlier was specified with a nonzero value.

Specifically, running virsh migrate with either
--auto-converge-increment, --auto-converge-initial, --comp-mt-dthreads,
--comp-mt-threads, or --comp-mt-level would set
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS parameter and if --parallel
option was not used, libvirt would complain

    error: invalid argument: Turn parallel migration on to tune it

even though --parallel-connections option was not used at all.

https://bugzilla.redhat.com/show_bug.cgi?id=1726643Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Report in logs when we don't find existing block job data and create it
just to handle the job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

While this function does start a block job in case when we'd not be able
to get our internal data for it, the handler sets the job state to
QEMU_BLOCKJOB_STATE_RUNNING anyways, thus qemuBlockJobStartupFinalize
would just unref the job.

Since the other usage of qemuBlockJobStartupFinalize in the other part
of the event handler was a bug replace this one anyways even if it would
not cause problems.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The block job event handler qemuProcessHandleBlockJob looks at the block
job data to see whether the job requires synchronous handling. Since the
block job event may arrive before we continue the job handling (if the
job has no data to copy) we could hit the state when the job is still
set as QEMU_BLOCKJOB_STATE_NEW (as we move it to the
QEMU_BLOCKJOB_STATE_RUNNING state only after returning from monitor).

If the event handler uses qemuBlockJobStartupFinalize it would
unregister and free the job. Thankfully this is not a big problem for
legacy blockjobs as we don't need much data for them but since we'd
re-instantiate the job data structure we'd report wrong job type for
active commit as qemu reports it as a regular commit job.

Fix it by not using qemuBlockJobStartupFinalize function in
qemuProcessHandleBlockJob as it is not starting the job anyways.

https://bugzilla.redhat.com/show_bug.cgi?id=1721375Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virCgroupRemove return -1 when removing cgroup failed.
But there are retry code to remove cgroup in QemuProcessStop:

 retry:
    if ((ret = qemuRemoveCgroup(vm)) < 0) {
        if (ret == -EBUSY && (retries++ < 5)) {
            usleep(200*1000);
            goto retry;
        }
        VIR_WARN("Failed to remove cgroup for %s",
                 vm->def->name);
    }

The return value of qemuRemoveCgroup will never be equal to "-EBUSY",
so change the return value of virCgroupRemove if failed.
Signed-off-by: NWang Yechao <wang.yechao255@zte.com.cn>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Shutting down the daemon after 30 seconds of being idle is a little bit
too aggressive. Especially when using 'virsh' in single-shot mode, as
opposed to interactive shell mode, it would not be unusual to have
more than 30 seconds between commands. This will lead to the daemon
shutting down and starting up between a series of commands.

Increasing the shutdown timer to 2 minutes will make it less likely that
the daemon will shutdown while the user is in the middle of a series of
commands.
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Instead of having each caller pass in the desired logfile name, pass in
the binary name instead. The logging code can then just derive a logfile
name by appending ".log".
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This adds detection of a Quobyte as a shared file system for live
migration.
Signed-off-by: NSilvan Kaiser <silvan@quobyte.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

We have two functions: virPCIDeviceAddressIsEqual() defined only
on Linux and virPCIDeviceAddressEqual() defined everywhere. And
both of them do the same. Drop the former in favour of the
latter.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 5ff46aaa added a new parameter but neglected to fix the NONNULL
declarations.
Reported-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

virPCIGetSysfsFile is conditionally compiled only on Linux platforms.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

When removing the disk fronted while any block job is still active we
need to transfer the ownership of the backing chain to the job itself as
the job still holds the reference to the chain members and thus attempts
to remove them would fail.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In cases when the disk frontend was unplugged while a blockjob was
running the blockjob inherits the backing chain. When the blockjob is
then terminated we need to unplug the chain as it will not be used any
more.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.

Add a helper for qemu to look also into the blockjob state.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.

This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.

The job state processing requires some care to figure out if a job
needs to be bumped.

For any invalid job try doing our best to cancel it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>