After attach-device a <hostdev> with --config, new device doesn't
show up in dumpxml and in guest.

To fix that, set dev->data.hostdev = NULL after work so that the
pointer is not freed, since vmdef has the pointer and still need it.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.

Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.

Commit id 'f1f68ca3' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.

Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.

We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When looking for a QEMU binary suitable for running ppc64le guests
we have to take into account the fact that we use the QEMU target
as key for the hash, so direct comparison is not good enough.

Factor out the logic from virQEMUCapsFindBinaryForArch() to a new
virQEMUCapsFindTarget() function and use that both when looking
for QEMU binaries available on the system and when looking up
QEMU capabilities later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260753

libxl/libxl_conf.c: In function 'libxlDriverConfigNew':
libxl/libxl_conf.c:1560:30: error: 'log_level' may be used uninitialized
in this function [-Werror=maybe-uninitialized]

Instead of a hardcoded DEBUG log level, use the overall
daemon log level specified in libvirtd.conf when opening
a log stream with libxl. libxl is very verbose when DEBUG
log level is set, resulting in huge log files that can
potentially fill a disk. Control of libxl verbosity should
be placed in the administrator's hands.

Fixes the following error when attempting to add a disk with bus='virtio'
to a machine which actually supports virtio-mmio (caught with ARM virt):

virtio disk cannot have an address of type 'virtio-mmio'

The problem has been likely introduced by
e8d55172. Before that
qemuAssignDevicePCISlots() was never called for ARM "virt" machine.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1124841

If running in session mode it may happen that we fail to set
correct SELinux label, but the image may still be readable to
the qemu process. Take this into account.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We may want to do some decisions in drivers based on fact if we
are running as privileged user or not. Propagate this info there.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We have plenty of callbacks in the driver. Some of these
callbacks require more than one argument to be passed. For that
we currently have a data type (struct) per each callback. Well,
so far for only one - SELinuxSCSICallbackData. But lets turn it
into more general name so it can be reused in other callbacks too
instead of each one introducing a new, duplicate data type.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The check is done in virSecuritySELinuxSetFilecon itself. There's
no need to check it again.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NChristian Loehle <cloehle@linutronix.de>

This allows the Wikipedia link to be recognized correctly by eg.
gnome-terminal's Open Link and Copy Link Address features.

Commit f1f68ca3 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.

The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.

Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 8125113c added code that should remove the disk backend if the
fronted hotplug failed for any reason. The code had a bug though as it
used the disk string for unplug rather than the backend alias. Fix the
code by pre-creating an alias string and using it instead of the disk
string. In cases where qemu does not support QEMU_CAPS_DEVICE, we ignore
the unplug of the backend since we can't really create an alias in that
case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1262399

There's a couple reports of things failing in this area (bug 1259070),
but it's tough to tell what's going wrong without stderr from
qemu-bridge-helper. So let's report stderr in the error message

Couple new examples:

virbr0 is inactive:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=failed to get mtu of bridge `virbr0': No such device

bridge isn't on the ACL:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=br0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=access denied by acl file

The xenXMConfigCacheRefresh method scans /etc/xen and loads
all config files it finds. It then scans its internal hash
table and purges any (previously) loaded config files whose
refresh timestamp does not match the timestamp recorded at
the start of xenXMConfigCacheRefresh(). There is unfortunately
a subtle flaw in this, because if loading the config files
takes longer than 1 second, some of the config files will
have a refresh timestamp that is 1 or more seconds different
(newer) than is checked for. So we immediately purge a bunch
of valid config files we just loaded.

To avoid this flaw, we must pass the timestamp we record at
the start of xenXMConfigCacheRefresh() into the
xenXMConfigCacheAddFile() method, instead of letting the
latter call time(NULL) again.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Mock libraries are not built with testutils.c, but there's one which
uses VIR_TEST_DEBUG.  But because that debug should be an error, if we
change it, then it will not only be more semantically correct, but mingw
compiler will be happier as well.

It also follows suit with all other mock libraries.

For few other things, used in this file, need libvirt.la to be added
into LIBADD for mingw as well.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

commit 4b53d0d4 "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

We have a new libvirt-appdev-guide-python which we need to
promote to users. Rewrite the existing page to mention it
too. Also use the new URL location which is automatically
refreshed once a day.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Up until now, the default has been rtl8139, but no check was in
place to make sure that device was actually available.

Now we try rtl8139, e1000 and virtio-net in turn, checking for
availability before using any of them: this means we have a much
better chance for the guest to be able to boot.

This capability can be used to detect whether or not the QEMU
binary supports the virtio-net-* network device.

This capability can be used to detect whether or not the QEMU
binary supports the e1000 network device.

This capability can be used to detect whether or not the QEMU
binary supports the rtl8139 network device.

Commit f1f68ca3 did not report an error if virFileMakePath()
returned -1.  Well, who would've guessed function with name starting
with 'vir' sets an errno instead of reporting an error the libvirt way.
Anyway, let's fix it, so the output changes from:

  $ virsh start arm
  error: Failed to start domain arm
  error: An error occurred, but the cause is unknown

to:

  $ virsh start arm
  error: Failed to start domain arm
  error: Cannot create directory '/var/lib/libvirt/qemu/domain-arm': Not
  a directory

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This reverts commit e5470dd0.

This has been ACK'd by the original author in the original mail thread:
https://www.redhat.com/archives/libvir-list/2015-September/msg00310.html

The reason to revert this is due to the patch breaking the generation of
internal subsites.  The original issue still needs to be dealt with,
though.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If the current live definition does not have memory hotplug enabled, but
the persistent one does libvirt would reject migration if the
destination does not support memory hotplug even if the user didn't want
to persist the VM at the destination and thus the XML containing the
memory hotplug definition would not be used. To fix this corner case the
code will check for memory hotplug in the newDef only if
VIR_MIGRATE_PERSIST_DEST was used.

Double semicolons have special meaning in makefiles, but they would have
to be combined with other rules witch such separators in order to be
used as intended.  Since there are no other rules like that, let's
clean it up.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 35847860 Added the virFileUnlink function, but failed to add
a version for mingw build, causing the following error:

  Cannot export virFileUnlink: symbol not defined
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1260846

Introduced by 8fedbbdb, if we parse an unordered NUMA cell, will
get a segfault. This is because of a check for overlapping @cpus
sets we have there. However, since the array to hold guest NUMA
cells is allocated upfront and therefore it contains all zeros,
an out of order cell will break our assumption that cell IDs have
increasing character. At this point we try to access yet NULL
bitmap and therefore segfault.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Running valgrind on a very simplistic program consisting only of
opening and closing admin connection (virAdmConnect{Open,Close}) shows a
leak in remoteAdminPrivNew, because the last reference to privateData is
not decremented, thus the object won't be disposed. This patch unrefs
the privateData object once we closed the active connection to daemon,
making further use of this connection  useless.

==24577==    at 0x4A089C7: calloc (in /usr/lib64/valgrind/vgpreload_***linux.so)
==24577==    by 0x4E8835F: virAllocVar (viralloc.c:560)
==24577==    by 0x4EDFA5C: virObjectNew (virobject.c:193)
==24577==    by 0x4EDFBD4: virObjectLockableNew (virobject.c:219)
==24577==    by 0x4C14DAF: remoteAdminPrivNew (libvirt-admin.c:152)
==24577==    by 0x4C1537E: virAdmConnectOpen (libvirt-admin.c:308)
==24577==    by 0x400BAD: main (listservers.c:39)

==24577== LEAK SUMMARY:
==24577==    definitely lost: 80 bytes in 1 blocks
==24577==    indirectly lost: 840 bytes in 6 blocks
==24577==      possibly lost: 0 bytes in 0 blocks
==24577==    still reachable: 12,179 bytes in 199 blocks
==24577==         suppressed: 0 bytes in 0 blocks

https://bugzilla.redhat.com/show_bug.cgi?id=1172544

https://bugzilla.redhat.com/show_bug.cgi?id=1254420Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Let's move some variables from an inside loop to global function
declaration header block. It's going to be easier for next
patches. At the same time, order the cleanup calls at the
function's end so it's easier to track which variables are freed
and which not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In e755186c we tried to introduce an example demonstrating
new virDomainRename API. Unfortunately, in the .gitignore we had
a different binary listed. It's 'rename' binary which we want git
to ignore, not 'test'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit e755186c added the rename example, but forgot to build some
essential files in there as well as add it to the spec file.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>