So far our code is full of the following pattern:

  dom = virGetDomain(conn, name, uuid)
  if (dom)
      dom->id = 42;

There is no reasong why it couldn't be just:

  dom = virGetDomain(conn, name, uuid, id);

After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In 9e246583 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

One of the problems with our virGetDomain function is that it
copies just domain name and domain UUID. Therefore it's very
easy to forget aboud domain ID. This can cause some bugs, like
virConnectGetAllDomainStats not reporting proper domain IDs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The hyperv panic notifier reports additional data in form of 5 registers
that are reported in the crash event from qemu. Log them into the VM log
file and report them as a warning so that admins can see the cause of
crash of their windows VMs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426176

That file has only two exported files and each one of them has
different naming.  virNode is what all the other files use, so let's
use it.  It wasn't used before because the clash with public API
naming, so let's fix that by shortening the name (there is no other
private variant of it anyway).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities.  Hence moving
the code to src/conf/ is the right way to go.

Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split.  And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.

Detect the node names when setting block threshold and when reconnecting
or when they are cleared when a block job finishes. This operation will
become a no-op once we fully support node names.

Add code to call the appropriate monitor command and code to lookup the
given disk backing chain member.

Our code calls it when starting or re-starting the domain or when
hotplugging the disk so there's nothing to be detected.

Add the fields to support setting tls-creds and tls-hostname during
a migration (either source or target). Modify the query migration
function to check for the presence and set the field for future
consumers to determine which of 3 conditions is being met (NULL,
present and set to "", or present and sent to something). These
correspond to qemu commit id '4af245dc3' which added support to
default the value to "" and allow setting (or resetting) to ""
in order to disable. This reset option allows libvirt to properly
use the tls-creds and tls-hostname parameters.

Modify code paths that either allocate or use stack space in order
to call qemuMigrationParamsClear or qemuMigrationParamsFree for cleanup.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the variable store (<nvram>) file is raw qemu can't do a snapshot of
it and thus the snapshot fails. QEMU rejects such snapshot by a message
which would not be properly interpreted as an error by libvirt.

Additionally allowing to use a qcow2 variable store backing file would
solve this issue but then it would become eligible to become target of
the memory dump.

Offline internal snapshot would be incomplete too with either storage
format since libvirt does not handle the pflash file in this case.

Forbid such snapshot so that we can avoid problems.

The qemuDomainSnapshotPrepare should always set a > 0 format value anyway,
so remove the check.

Found by Coverity.

We reported error in caller virQEMUCapsCacheLookupByArch.
So the same error messages in qemuConnectGetDomainCapabilities
is useless.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

While the code path that queries the monitor allocates a separate copy
of the 'group_name' string the path querying the config would not copy
it. The call to virTypedParameterAssign would then steal the pointer
(without clearing it) and the RPC layer freed it. Any subsequent call
resulted into a crash.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1433183

https://bugzilla.redhat.com/show_bug.cgi?id=1379200

When we are restoring a domain from a saved image, or just
updating its XML in the saved image - we have to make sure that
the ABI guests sees will not change. We have a function for that
which reports errors. But for some reason if this function fails,
we call it again with slightly different argument. Therefore it
might happen that we overwrite the original error and leave user
with less helpful one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds support and documentation
for the emulation_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the alignment_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults_maj perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults_min perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the cpu_migrations perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the context_switches perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the task_clock perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the cpu_clock perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Previously the code called virStorageSourceUpdateBlockPhysicalSize which
did not do anything on empty drives since it worked only on block
devices. After the refactor in c5f61513 it's called for all devices
and thus attempts to deref the NULL path of empty drives.

Add a check that skips the update of the physical size if the storage
source is empty.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1420718

Add code that validates user's selection of cores and then uses the
existing code to plug in the vCPU.

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This follows the same check for disk, because we cannot remove iothread
if it's used by disk or by controller.  It could lead to crashing QEMU.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

If virDomainDelIOThread API was called with VIR_DOMAIN_AFFECT_LIVE
and VIR_DOMAIN_AFFECT_CONFIG and both XML were already a different
it could result in removing iothread from config XML even if there
was a disk using that iothread.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The bare fact that mnt namespace is available is not enough for
us to allow/enable qemu namespaces feature. There are other
requirements: we must copy all the ACL & SELinux labels otherwise
we might grant access that is administratively forbidden or vice
versa.
At the same time, the check for namespace prerequisites is moved
from domain startup time to qemu.conf parser as it doesn't make
much sense to allow users to start misconfigured libvirt just to
find out they can't start a single domain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These functions do not need to see the whole virDomainDiskDef.
Moreover, they are going to be called from places where we don't
have access to the full disk definition. Sticking with
virStorageSource is more than enough.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have a function for properly assigning the blockdeviotune
info, let's use it instead of dropping the group name on every
assignment.  Otherwise it will not work with both --live and --config
options.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>