Create/use virGetSCSIHostNumber to replace the static getHostNumber

Removed the "if (result &&" since result is now required to be non NULL
on input.

https://bugzilla.redhat.com/show_bug.cgi?id=1141621

As part of attach processing, assign the device aliases by calling
qemuAssignDeviceAliases during qemuDomainQemuAttach once all the devices
are found after the qemuParseCommandLinePid processing.

This will alleviate a symptom that caused a libvirtd crash during an
attempted device detach.

https://bugzilla.redhat.com/show_bug.cgi?id=1141621

If the QEMU_CAPS_DEVICE is set, then ensure the host device alias has
been properly set before making the calls to detach the device

If the QEMU_CAPS_DEVICE is set, then ensure the chr device alias has
been properly set before making the calls to detach the device

If the QEMU_CAPS_DEVICE is set, then ensure the host device alias has
been properly set before making the calls to detach the device

If the QEMU_CAPS_DEVICE is set, then ensure the disk device alias has
been properly set in prior to making the calls to detach the device.

In qemuDomainDetachControllerDevice if the info.alias already exists
a call to qemuAssignDeviceControllerAlias would overwrite the existing
so avoid this possibility.

Slight adjustment to the qemu-attach man page to note device hotplug
and hot unplug may not work and that the environment should be considered
read-only

Currently remote driver only initializes partial fields of
remote_connect_get_all_domain_stats_args. But xdr_array()
will check the uninitialised field 'doms_val'.
For safty reason, memset all fields of args is better.

Fix the following error from valgrind, like:
==30515== 1 errors in context 1 of 3:
==30515== Conditional jump or move depends on uninitialised value(s)
==30515==    at 0x85E9402: xdr_array (xdr_array.c:88)
==30515==    by 0x4FD8FC9: xdr_remote_connect_get_all_domain_stats_args (remote_protocol.c:6473)
==30515==    by 0x4FE72F2: virNetMessageEncodePayload (virnetmessage.c:350)
==30515==    by 0x4FDD21C: virNetClientProgramCall (virnetclientprogram.c:326)
==30515==    by 0x4FB4D01: callFull.isra.2 (remote_driver.c:6667)
==30515==    by 0x4FCBD45: call (remote_driver.c:6689)
==30515==    by 0x4FCBD45: remoteConnectGetAllDomainStats (remote_driver.c:7793)
==30515==    by 0x4FA0E75: virConnectGetAllDomainStats (libvirt.c:21678)
==30515==    by 0x147FD1: cmdDomstats (virsh-domain-monitor.c:2148)
==30515==    by 0x13006B: vshCommandRun (virsh.c:1915)
==30515==    by 0x12A9E1: main (virsh.c:3699)
Signed-off-by: NJincheng Miao <jmiao@redhat.com>

After rewriting the whole driver, Only version specified code is
remained in vbox_tmpl.c. So, this patch removes those unused macros
header files in vbox_tmpl.c.

This patch provides the new stroage driver for vbox. The work
is similar with patch 87dea4fc and the next b4022de3.

The API on IHardDiskAttachment is merged into IMediumAttachment.
So, we don't need it anymore.

The GetMedium will always return a IHardDisk object them.
In 2.2 and 3.0, it is what GetHardDisk exactly do. In 3.1 and later,
The IMedium is same as IHardDisk.

If the <path> in target element is not given, libvirt will put the
new volume in ~/.VirtualBox by default.

The CreateHardDiskMedium only support create HardDisk for medium
type, and it only works when vbox version >= 3.1. This patch make
the function workable with all vbox versions and rename it as
CreateHardDisk.

In vbox 2.2 and 3.0 this function will create a IHardDisk object.
In vbox later than 3.0, this function will create a IMedium object.

In old version, function FindMedium in UIVirtualBox doesn't work
for vbox2.2 and 3.0. We assume it will not be used when vbox in
these versions.

But when rewriting vboxStorageVolLookupByPath, we found it was
compatibe to use FindMedium to get a IHardDisk object, even in
vbox old versions. To achieve this, first make FindMedium call
FindHardDisk when VBOX_API_VERSION < 4000000.
Then change the argument type **IMedium to **IHardDisk. (As the
rules in heriachy, we can't transfer a IHardDisk to match
IMedium in output)

In vbox 2.2 and 3.0, the caller must be aware that they will get
a IHardDisk object in return.

We use typedef IMedium IHardDisk to make IHardDisk hierachy from
IMedium (Actually it did on vbox 2.2 and 3.0's C++ API).
So when calling
    VBOX_MEDIUM_FUNC_ARG*(IHardDisk, func, args)
we can directly replace it to
    gVBoxAPI.UIMedium.func(IHardDisk, args)

When dealing with this two types, we get some rules from it's
hierachy relationship.

When using IHardDisk and IMedium as input, we can't transfer a
IMedium to IHardDisk. Like:
    gVBoxAPI.UIHardDisk.func(IHardDisk *hardDisk, args)
    Here, we can't put a *IMedium as a argument.

When using IHardDisk and IMedium as output, we can't transfer a
IHardDisk to IMedium. Like:
    gVBoxAPI.UIMachine.GetMedium(IMedium **out)
    Here, we can't put a **IHardDisk as a argument. If this case
    do happen, we either change the API to GetHardDisk or write a
    new one.

This patch rewrites the following functions
    *vboxStorageOpen
    *vboxStorageClose
    *vboxConnectNumOfStoragePools
    *vboxConnectListStoragePools
    *vboxStoragePoolLookupByName

These functions do not call any vbox API, so I directly move it
from vbox_tmpl.c to vbox_storage.c

A small improvement is made on vboxConnectListStoragePools.
The if condition nnames == 1 is modified to nnames > 0. So if the
caller put more than one slot to get active storage pools, the new
function will return exactly one, while the old one would only
return 0.

There are lots of macro declarations in vbox_common.c,
vbox_network.c, and the coming vbox_storage.c which simply the API
calling. Since they are totally the same. We shouldn't keep three
copies of that, so they are moved to vbox_common.h.

Note: The macros are quite different from those in vbox_tmpl.c,
      because they are using different API.

We should follow the rules that CHECK macro only do checking works.
But this VBOX_OBJECT_CHECK and VBOX_OBJECT_HOST_CHECK declared some
varibles at the same time, which broke the rule. So the patch
removed this macros and dispatched it in source code.

The storage driver is still not rewriten at this point. So, I
remains the VBOX_OBJECT_CHECK macro in vbox_tmpl.c. But this will
finally be removed in patch 'vbox: Remove unused things in vbox_tmpl.c'

I made a mistake on copyright in patch 7f0f415b.

If I copied codes from one file to another, I should copy the
copyright announcement as well. So this patch makes up the
copyright which I should have added in the previous patch.

When starting an active block commit job in virsh, it will report
"Block Commit started", but for more precise message it could
report "Active Block Commit started".
Signed-off-by: NShanzhi Yu <shyu@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libc has another constant with the same name, which leads to
redefinition error when building against static libvirt

Not every error message from qemu-ga has to have the 'class' field
filled out. For instance, I've seen this error message lately:

  qemuAgentCheckError:1047 : unable to execute QEMU agent command \
  {"execute":"guest-set-time"}: \
  {"error":{"desc":"Invalid parameter type, expected: integer"}}

However, this got translated into rather generic error message:

  internal error: unable to execute QEMU agent command
  'guest-set-time': unknown QEMU command error

So we've dropped better error message in favor of a generic one.
This is due to our code which expects 'class' which is not
present here.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds functionality to processNicRxFilterChangedEvent().
The old and new multicast lists are compared and the filters in
the macvtap are programmed to match the guest's filters.
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>

This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:

* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: NLaine Stump <laine@laine.org>

https://bugzilla.redhat.com/show_bug.cgi?id=956506 documents that
given a domain where an internal snapshot parent has an external
snapshot child, we lacked a safety check when trying to use the
--children-only option to snapshot-delete:

$ virsh start dom
$ virsh snapshot-create-as dom internal
$ virsh snapshot-create-as dom external --disk-only
$ virsh snapshot-delete dom external
error: Failed to delete snapshot external
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children-only
Domain snapshot internal children deleted

While I'd still like to see patches that actually do proper external
snapshot deletion, we should at least fix the inconsistency in the
meantime.  With this patch:

$ virsh snapshot-delete dom internal --children-only
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet

* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Fix condition.
Signed-off-by: NEric Blake <eblake@redhat.com>

virNetDevLinkDump() gets a message from netlink into "resp", then
calls nlmsg_parse() to fill the table "tb" with pointers into resp. It
then returns tb to its caller, but not before freeing the buffer at
resp. That means that all the callers of virNetDevLinkDump() are
examining memory that has already been freed. This can be verified by
filling the buffer at resp with garbage prior to freeing it (or, I
suppose, just running libvirtd under valgrind) then performing some
operation that calls virNetDevLinkDump().

The code has been like this ever since virNetDevLinkDump() was written
- the original author didn't notice it, and neither did later
additional users of the function. It has only been pure luck (or maybe
a lack of heavy load, and/or maybe an allocation algorithm in malloc()
that delays re-use of just-freed memory) that has kept this from
causing errors, for example when configuring a PCI passthrough or
macvtap passthrough network interface.

The solution taken in this patch is the simplest - just return resp to
the caller along with tb, then have the caller free it after they are
finished using the data (pointers) in tb. I alternately could have
made a cleaner interface by creating a new struct that put tb and resp
together along with a vir*Free() function for it, but this function is
only used in a couple places, and I'm not sure there will be
additional new uses of virNetDevLinkDump(), so the value of adding a
new type, extra APIs, etc. is dubious.

In a clean build system (Ubuntu 14.04), the viridentitytest failed to compile.
Even if all the SELINUX libraries and depedencies are installed. See the error
message below:

[...]
  CC       viridentitytest.o
  CCLD     viridentitytest
/usr/bin/ld: viridentitytest.o: undefined reference to symbol
                                                       'security_disable'
//lib/x86_64-linux-gnu/libselinux.so.1: error adding symbols: DSO missing
                                                           from command line
collect2: error: ld returned 1 exit status
make: *** [viridentitytest] Error 1

Simply adding the variable SELINUX_LIBS in viridentitytest rules of
Makefile.am to include SELINUX libraries into viridentitytest solved that
compilation issue.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

libvirtd will report below error if it does not make sure driver was not NULL
in virRegisterNetworkDriver

$ libvirtd
2014-10-24 09:24:36.443+0000: 28876: info : libvirt version: 1.2.10
2014-10-24 09:24:36.443+0000: 28876: error : virRegisterNetworkDriver:549 : driver in virRegisterNetworkDriver must not be NULL
2014-10-24 09:24:36.443+0000: 28876: error : virDriverLoadModule:99 : Failed module registration vboxNetworkRegister
Signed-off-by: NShanzhi Yu <shyu@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The recently added driver-*.h files were not listed in the
Makefile.am causing them to be missed when creating dists.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The <sysinfo> data block was indented by 2 spaces too many.
This was missed because we never had any test validating
the XML formatting.

The cfg.mk rule for checking preprocessor indentation was
mistakenly missing the libvirt.h.in file due to bad file
extension matching rule. Fix that and the resolve the
incorrect indentation that is identified.