Initial scratch of the admin library.  It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.

There's pkg-config file added and spec-file adjusted as well.

Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it.  Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just the addition of VIR_FROM_ADMIN to the enum of error domains.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

For now there are only CONNECT_OPEN and CONNECT_CLOSE procedures.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since this is just a new option for gendispatch, it looks more like a
cleanup.  The only differences handled by it are connect pointers,
private pointers and API naming customs.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Rename the test to virnetdaemontest and use virNetDaemon objects instead
of virNetServer inside.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This allows to have more servers in one daemon which helps isolating
some resources.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add the qemu-nbd tasks to the container cgroup to make sure those will
be killed when the container is stopped. In order to reliably get the
qemu-nbd tasks PIDs, we use /sys/devices/virtual/block/<DEV>/pid as
qemu-nbd is daemonizing itself.

This function gets all the PIDs listed in /proc/PID/task. This will be
needed at least to move all qmeu-nbd tasks to the container cgroup.

https://bugzilla.redhat.com/show_bug.cgi?id=1186969

When generating the path to the dir for a CIFS/Samba driver, the code
would generate a source path for the mount using "%s:%s" while the
mount.cifs expects to see "//%s/%s". So check for the cifsfs and
format the source path appropriately.

Additionally, since there is no means to authenticate, the mount
needs a "-o guest" on the command line in order to anonymously mount
the Samba directory.

In order for the glusterfs boolean to be set, the pool->def->type must be
VIR_STORAGE_POOL_NETFS, thus the check within virCommandNewArgList whether
pool->def->type is VIR_STORAGE_POOL_FS will never be true, so remove it

Commit id '887dd362' added support for a netfs pool format type 'cifs'
and 'gluster' in order to add rng support for Samba and glusterfs netfs
pools. Originally, the CIFS type support was added as part of commit
id '61fb6979'. Eventually commit id 'b325be12' fixed the gluster rng
definition to match expectations.

As it turns out the CIFS rng needed a similar change since the directory
path is not an absDirPath, rather just a dirPath will be required.

We're using Polkit's DBus API so no need to check wether this feature is
supported. We don't use the result or the path to the pkcheck program
anywhere.

We were using "complicated" error printing in virnetservertest even
though we could've just dispatched the error.  Also add some good
practices that might come in handy (the code may fail without proper
initialization and event loop).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

One string was already used only if that condition was true, second one
is added now.  Both are used in a nicer way.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If virNetServerMDNSAddEntry() fails when adding a service to a server,
it doesn't decrease the number of services.  Hence access to their
members segfaults (e.g. when free()-ing the sruct).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Suggested-by: NMichal Prívozník <mprivozn@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The search for the memory balloon driver object is extended by a
second known name "virtio-balloon-ccw" in support for virtio-ccw.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>

The --xml option is mandatory if an XML description is used.
Otherwise the third parameter is treated as the destination.

https://bugzilla.redhat.com/show_bug.cgi?id=1206406#c3

Similarly to a02a161b remove the default
pinning assumption from emulatorpin.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1227180

Instead of initializing return value to zero (success) and overwriting
it on every failure just before the control jumps onto 'out' label,
let's initialize to an error value and set to zero only when we are
sure about the success. Just follow the pattern we have in the rest of
the code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of initializing return value to zero (success) and overwriting
it on every failure just before the control jumps onto 'out' label,
let's initialize to an error value and set to zero only when we are
sure about the success. Just follow the pattern we have in the rest of
the code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1225694

Check if the disk partition to be wiped is the extended partition, if
so then disallow it. Do this via changing the wipeVol backend to check
the volume before passing to the common virStorageBackendVolWipeLocal

https://bugzilla.redhat.com/show_bug.cgi?id=1021480

Seems the property has been deprecated for qemu, although seemingly ignored.

This patch enforces from a libvirt perspective that a scsi-block 'lun'
device should not provide the 'serial' property.

https://bugzilla.redhat.com/show_bug.cgi?id=1200206

Commit id '1b4eaa61' added the ability to have a mode='direct' for
an iscsi disk volume.  It relied on virStorageTranslateDiskSourcePool
in order to copy any disk source pool authentication information to
the direct disk volume, but it neglected to also copy the 'secrettype'
field which ends up being used in the domain volume formatting code.
Adding a secrettype for this case will allow for proper formatting later
and allow disk snapshotting to work properly

Additionally libvirtd restart processing would fail to find the domain
since the translation processing code is run after domain xml processing,
so handle the the case where the authdef could have an empty secrettype
field when processing the auth and additionally ignore performing the
actual and expected auth secret type checks for a DISK_VOLUME since that
data will be reassembled later during translation processing of the
running domain.

During a review, I've noticed this error message that was eventually
produced when I was trying to define a domain:

error: invalid argument: could not find capabilities for arch=mips64el
domaintype=(null)

Look at the (null). Why is it there? Well, during XML parsing, we try
to look up the default emulator for given OS type and possibly virt
type too. And this is the problem, because if we don't want to look up
by virt type, a -1 is passed to note this fact. Later, the code
handles -1 just right. Except for error message. When it is
constructed (in a very fabulous way I must say), the value is compared
to zero, not -1. And since we don't have any translation from -1 to a
virt type string, we just print (null).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>

If a guest has multiple network devices with the same MAC address,
when we online update the second device, libvirtd always updates
the first one.

commit def31e4c forgot to fix the online updating scenario. We need to
use virDomainNetFindIdx() to find the correct network device.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1228007

When attaching a scsi volume lun via the attach-device --config or
--persistent options, there was no translation of the source pool
like there was for the live path, thus the attempt to modify the config
would fail since not enough was known about the disk.

A variable can't be named system, obviously. Well, it can if the
compiler is new enough to distinguish a variable named system and a
function call system(). And some older systems, don't have wise
compiler.

  CC     util/libvirt_util_la-virsysinfo.lo
cc1: warnings being treated as errors
../../src/util/virsysinfo.c: In function 'virSysinfoParseSystem':
../../src/util/virsysinfo.c:649: error: declaration of 'system' shadows a global declaration [-Wshadow]
/usr/include/stdlib.h:717: error: shadowed declaration is here [-Wshadow]
make[3]: *** [util/libvirt_util_la-virsysinfo.lo] Error 1
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When reviewing some network patches, I've noticed we don't have
those switches to the 'net-list' command. We should. They are
merely copied over from 'list' command.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of sticking to old code pattern use the one laid out by
cmdList. Use FILTER() macro instead of series of boolean
variables.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We are using it to print a value that can't be NULL and does not need
any escaping anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

With a few exceptions, we assume that qemu binary for given
architecture has form of qemu-system-$arch. Well, openrisc is yet
another exception. It's binary is called qemu-system-or32.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move all the system_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move all the bios_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Fairly recently we've introduced virnetservertest. This test has some
input data stored under tests/virnetserverdata which unfortunately was
not distributed among with the test. Therefore 'make distcheck'
failed. Fix this by adding the directory into EXTRA_DIST.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I see no reason to duplicate this list of architectures. This also allows
more guest architectures to be used with libvirt (like the mips64el qemu
machine I am trying to run).
Signed-off-by: NJames Cowgill <james410@cowgill.org.uk>

Faster version of virJSONValueFromString(virJSONValueToString()).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>