Commit ffc49e57 broke syntax-check:

  cppi: libvirt.spec.in: line 622: not properly indented
  cppi: libvirt.spec.in: line 624: not properly indented
  cppi: libvirt.spec.in: line 640: not properly indented
  cppi: libvirt.spec.in: line 642: not properly indented
  maint.mk: incorrect preprocessor indentation
  cfg.mk:697: recipe for target 'sc_spec_indentation' failed

Indent the new conditionals properly.

MinGW complained that we might be dereferencing a NULL pointer.  While
that can't be true, the logic certainly allows for that.

../../src/conf/domain_conf.c: In function 'virDomainDefPostParse':
../../src/conf/domain_conf.c:4224:18: error: potential null pointer dereference [-Werror=null-dereference]
         if (!vcpu->online && vcpu->cpumask) {
              ~~~~^~~~~~~~
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The systemd-machined tools libvirt uses were split into a
systemd-container RPM. Without depending on this, libvirt
may silently fallback to the non-systemd cgroup impl which
is not desirable.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

MinGW complained that we might be dereferencing a NULL pointer.  While
that can't be true, the logic certainly allows for that.

src/conf/domain_conf.c: In function 'virDomainDefGetVcpuPinInfoHelper':
src/conf/domain_conf.c:1545:17: error: potential null pointer dereference [-Werror=null-dereference]
         if (vcpu->cpumask)
              ~~~~^~~~~~~~~
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

IPv6 RA always contains an implicit default route via
the link-local address of the source of RA. This forces
the guest to install a route via isolated network, which
may disturb the guest's networking in case of multiple interfaces.
More info in 013427e6.

The validity of this route is controlled by "default [route] lifetime"
field of RA. If the lifetime is set to 0 seconds, then no route
is installed by receiver.

dnsmasq 2.67+ supports "ra-param=<interface>,<RA interval>,<default
lifetime>" option. We pass "ra-param=*,0,0"
(here, RA_interval=0 means default) to disable default gateway in RA
for isolated networks.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1354238

So we spend some time and effort constructing perfect file name
for an automatic coredump of a domain, but then just leak it and
use the domain name anyway. This is probably due to a silly
mistake that slipped even through review.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

At least with systemd v210, NOTIFY_SOCKET is abstact, e.g.
@/org/freedesktop/systemd1/notify. sendmsg() fails on such a socket
with "Connection refused". The unix(7) man page contains the following
details wrt abstract socket addresses

abstract: an abstract socket address is distinguished (from a
          pathname socket) by the fact that sun_path[0] is a null byte
          ('\0').  The socket's address in this namespace is given by the
          additional bytes in sun_path that are covered by the specified
          length of the address structure.  (Null bytes in the name have
          no special significance.)

So we need to be more precise about the address length, setting it to
the sizeof sa_family_t + length of address copied to sun_path instead
of setting it to the sizeof the entire sockaddr_un struct.

Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=987668Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When fetching domains with virConnectListAllDomains() and when filtering
by snapshot existence is requested the ESX driver first lists all the
domains and then check one-by-one for snapshot existence. This process
takes unnecessarily long time.

To significantly improve the time necessary to finish the query we can
request the snapshot related info directly when querying the list of
domains from VMware.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>

The old 32-bit-only mingw project had a mismatch in its <sys/types.h>
that omitted ssize_t, but where size_t was a different rank than
int as picked by gnulib.  But now that mingw64 (both 32- and 64-bit)
is the more popular platform (Fedora has dropped mingw in favor of
mingw64), we no longer need to carry a hack to gnulib to cater to
the old mingw.  This reverts part of commit 1012dc29.
Signed-off-by: NEric Blake <eblake@redhat.com>

We can't mock tests on Mingw, which lacks dlopen() and friends;
follow the paradigms used in other mock files of conditionally
compiling nothing when not building for Linux.
Signed-off-by: NEric Blake <eblake@redhat.com>

In an unlikely event of execve() failing, the virCommandExec()
function does not report any error, even though checks that are
at the beginning of the function are verbose when failing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The modification of .volWipe callback wipes ploop volume using one of
given wiping algorithm: dod, nnsa, etc.
However, in case of ploop volume we need to reinitialize root.hds and DiskDescriptor.xml.

v2:
- added check on ploop tools presens
- virCommandAddArgFormat changed to virCommandAddArg
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

<devices>
  <iommu model='intel'/>
</devices>

results in:

-device intel-iommu

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

Check whether QEMU supports -device intel-iommu

Note that the presence of this option does not mean that it's
usable because of a bug in earlier QEMU versions, but it's
better than nothing.

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

A device with an attribute 'model', with just one model
so far:

<devices>
  ...
  <iommu model='intel'/>
</devices>

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

For every but the last argument, we also need space for a space
and a backslash.

Rewrap everything longer than 78 characters.

Commit c9c03ea2 stopped creating an intermediate file during syntax-check
to save on execution time. It also switched to outputting the whole
incorrectly wrapped file instead of a diff needed to fix it.

Feed the newly wrapped file to diff via a pipe.

Note that fixing it by running test-wrap-argv.pl --in-place or
the unit test with VIR_TEST_REGENERATE_OUTPUT is easier.

test-wrap-argv.pl does not know how to rewrap other files.

Commit 843a70a8 changed test-wrap-argv.pl to use
/usr/bin/env perl
instead of
/usr/bin/perl

However when called from qemuxml2argvtest with
VIR_TEST_REGENERATE_OUTPUT, PATH is set to '/bin'.

Find the path to perl early in virTestMain, in case we
are going to need it later after we've overridden PATH.

Unused since its introduction in commit 4b942fe8.

In commit ec5dcf2a and b0b4a35c we have moved qemuhotplugtest's XMLs to
new directories but forgot to fix the Makefile. Add 2 directories in
EXTRA_DIST to fix broken VPATH build. Also remove now unused
qemuhotplugtestdata directory from the Makefile as well as from the
tree.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently many users of virConf APIs are defining the same
macros for calling virConfValue() and then doing type
checking. To remove this repeated code, add a set of
typesafe accessor methods.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If the config file does not end with a \n, the parser will append
one. When re-allocating the array though, it is mistakenly assuming
that 'len' is the length including the trailing NUL, but it does
not. So we must add 2 to len, when reallocating, not 1.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virconftest is different from all our other tests in that
the C program only tests a single in/out config file pair. It
relies on a shell wrapper to invoke it once for each test
file.

This gets rid of the shell wrapper and makes the C program
actually run over each test file using the normal test pattern.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This way we can safely differentiate what XMLs contain whole domain
definitions and which contain just devices.  Thanks to that we can
test the domain XMLs in virschematest again.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>