When changing one of the src/libvirt-*.c files to alter the docs, the
adjusted files weren't being built.  Added them into APIBUILD_STAMP and
then added that to the html/index.html rule which is used for the
$(apihtml_generated) generated rule.

Also, for clean we can remove the html/*.html files

With kernel 3.18 (since commit 3e32cb2e0a12b6915056ff04601cf1bb9b44f967)
the "unlimited" value for cgroup memory limits has changed once again as
its byte value is now computed from a page counter.
The new "unlimited" value reported by the cgroup fs is therefore 2**51-1
pages which is (VIR_DOMAIN_MEMORY_PARAM_UNLIMITED - 3072). This results
e.g. in virsh memtune displaying 9007199254740988 instead of unlimited
for the limits.

This patch uses the value of memory.limit_in_bytes from the cgroup
memory root which is the system's "real" unlimited value for comparison.

See also libvirt commit 231656bb for the
history for kernel 3.12 and before.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:

  # virsh start $dom && ssh $dom

In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The part of the code that iterates over an array of JSON values
is going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The part of the code that appends found IP address into a list is
going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:

  _nss_$module_$function

Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have a module that's able to track
<domain, mac addres list> pairs, hook it up into
our network driver.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This module will be used to track:

  <domain, mac address list>

pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Problem with VIR_FREE() is that we are not linking
libvirt-utils.so to our mock libs therefore there will be an
unresolved symbol. Fortunately, nsstest that eventually links
with the nssmock links also with libvirt-utils.so and thus the
symbol is resolved after all. However, if one wants to run the
test binary under valgrind it is impossible to do so. Because of
the unresolved symbol.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In dd7bfb2c I've removed locking of the network driver upon
it's allocation. However, I forgot to remove one location of the
driver unlock.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1336564

Add the ability to set/display the group_name for block device iotune
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.

Add the xml2argvtest for testing.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add support to read/parse the iotune group setting for qemu.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than have multiple bool values, create a single enum with bits
representing what fields are set. Fields are generally set in groups
of 3 (read, write, total).

Currently we build the JSON object for the "block_set_io_throttle"
command using the knowledge that a NULL for a support*Options boolean
would essentially ignore the rest of the arguments.

This may not work properly if some capability was backported, plus it just
looks rather ugly. So instead, build the "base" arguments and then if
the support*Option bool capability is set, add in the arguments on the fly.

Then append those arguments to the basic command and send to qemu.

Rather than using negative logic and setting the maxparams to a lesser
value based on which capabilities exist, alter the logic to modify the
maxparams based on a base value plus the found capabilities. Reduces the
chance that some backported feature produces an incorrect value.

Add the capability to detect if the qemu binary can support the feature
to use throttling.group.

Add the new field to support sharing I/O throttling quota between
multiple drives.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

qemu commit: f74eefe0
https://lwn.net/Articles/667156/Signed-off-by: NLin Ma <lma@suse.com>

These features are included:
AVX512DQ, AVX512IFMA, AVX512BW, AVX512VL, AVX512VBMI, AVX512_4VNNIW and
AVX512_4FMAPS.

qemu commits: cc728d14 and 95ea69fb
Signed-off-by: NLin Ma <lma@suse.com>

Commit id '03e750f3' added support for checking the PLOOP type; however,
it used 'target.type' which no storage code ever fills in, so it will
never be set.  Change to just vol->type (could use vol->target.format
as well).

Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Add a global check for duplicate drive addresses. This will fix the
problem of duplicate disk and hostdev drive addresses.

Example for duplicate drive addresses:
<disk>
  ...
  <target name='sda'/>
</disk>
<disk>
  ...
  <target name='sdb'/>
  <address type='drive' controller=0 bus=0 target=0 unit=0/>
</disk>

Another example:
<hostdev mode='subsystem' type='scsi' managed='no'>
  <source>
  ...
  </source>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no'>
  <source>
  ...
  </source>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>

Unfortunately the fixes (1b08cc17,
8d46386b) weren't enough to catch these
cases and it isn't possible to add additional checks in
virDomainDeviceDefPostParseInternal() for SCSI hostdevs or
virDomainDiskDefAssignAddress() for SCSI/IDE/FDC/SATA disks without
adding another parse flag (virDomainDefParseFlags) to disable this
validation while updating or detaching a disk or hostdev.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Comparing the parameter 'type' against the member 'bus' instead of
against the member 'type' is quite confusing. Rename the parameter
'type' to 'bus_type' to clarify its meaning.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Pass the virDomainDeviceDriveAddress as a struct instead of individual
arguments. Reworked the function descriptions.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The next release will be the first one of 2017, so the
version number will be 3.0.0 rather than 2.6.0.

* po/*.po*

Two reasons:
1.in none hotplug, we will pass it. We can see from libvirt function
qemuBuildVhostuserCommandLine
2.qemu will use this vetcor num to init msix table. If we don't pass, qemu
will use default value, this will cause VM can only use default value
interrupts at most.
Signed-off-by: Ngaohaifeng <gaohaifeng.gao@huawei.com>

To stay consistent.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>