Creating a copy of the definition we want to add in a migration cookie
makes the code cleaner and less prone to memory leaks or double free
errors.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1398087

Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.

Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".

Move the --print-xml to the end of the qualifiers since it's not
properly positionally situated for both --pool-create-as and --pool-define-as
and could be miscontrued as being the 3rd positional argument.

While parsing if the storage source is not present, then a defaultFormat
was not set. This could lead to oddities such as seeing "unknown" format
in output for the "logical" pool even though the only format the pool could
support would be "lvm2".

This does "put a label" on other pool defaults as follows:

   File System: FS_AUTO
   Network File System: NETFS_AUTO
   Disk: UNKNOWN

Each of which is the "0" value for their respective pools and thus
would be no "real" change.

Migration with invtsc is allowed by QEMU as long as TSC frequency is
explicitly specified.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU allows for TSC frequency to be explicitly set to enable migration
with invtsc (migration fails if the destination QEMU cannot set the
exact same frequency used when starting the domain on the source host).

Libvirt already supports setting the TSC frequency in the XML using

    <clock>
      <timer name='tsc' frequency='1234567890'/>
    </clock>

which will be transformed into

    -cpu Model,tsc-frequency=1234567890

QEMU command line.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The frequency is documented and formatted as an attribute of the <timer>
element rather than a nested <frequency> element expected by the parser.
Luckily enough, timer frequency has not been used by any driver so far.
And users were not able to set it in the XML either.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

 - Make virMediatedDeviceNew() stub args match its prototype
 - Fix typo: virRerportError -> virReportError
 - Move MDEV_SYSFS_DEVICES definition out of the #ifdef __linux__ block
   so we don't have to stub virMediatedDeviceGetSysfsPath()

Fix typo: virNetDevVLanPtr -> virNetDevVlanPtr.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1430679

As it turns out some file headers (e.g. ext4) may be larger/longer than
the 512 bytes of zeros being written prior to a pvcreate, so let's write
out 2048 bytes similar to how the pvcreate sources would peek at the first
4 sectors of the device.

Make sure there is at enough bytes on the device to clear before doing
doing the clear - just to be sure.

Causes build failure when enabling static analysis

Ensure to insert </change> <change> between items - lost during merge
resolution.

This adds a few validations to the devices listed for a hostdev network:

* devices must be listed by PCI address, not by netdev name

* listing a device by PCI address is valid only for hostdev networks, not
  for other types of network (e.g. macvtap passthrough).

* each device in a hostdev pool must be an SR-IOV VF

Resolves: https://bugzilla.redhat.com/1004676

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That way you get the error from the compiler before the linker.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Previously, this function must've been called only on Linux in order
to fail gracefully.  That lead to #ifdef mess in callers, so the
function was redesigned so it failed gracefully on non-existing
files.  However that commit forgot to define the function outside the
__linux__ ifdef, it broke non-Linux builds.

Caused by c67e04e2.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Be more positive and reject negative numbers where we don't
allow them by using the virStrToLong variants with 'p'.

https://bugzilla.redhat.com/show_bug.cgi?id=1436119

https://bugzilla.redhat.com/show_bug.cgi?id=1436119

Matching the beginning of a path in syntax check does not work because
each path is enriched with a prefix of the source tree.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This check makes sense only in *.c files.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The test takes

  x86-cpuid-Something-guest.xml CPU (the CPU libvirt would use for
    host-model on a CPU described by x86_64-cpuid-Something.xml without
    talking to QEMU about what it supports on the host)

and updates it according to CPUID data from QEMU:

  x86_64-cpuid-Something-enabled.xml (reported as "feature-words"
    property of the CPU device)

and

  x86_64-cpuid-Something-disabled.xml (reported as "filtered-features"
    property of the CPU device).

The result is compared to

  x86_64-cpuid-Something-json.xml (the CPU libvirt would use as
    host-model based on the reply from query-cpu-model-expansion).

The comparison is a bit tricky because the *-json.xml CPU contains fewer
disabled features. Only the features which are included in the base CPU
model, but listed as disabled in *.json will be disabled in *-json.xml.
The CPU computed by virCPUUpdateLive from the test data will list all
features present in the host's CPUID data and not enabled in *.json as
disabled. The cpuTestUpdateLiveCompare function checks that the computed
and expected sets of enabled features match.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

All CPU features which QEMU does not know about but libvirt knows them
(currently "cmt" is the only one) are implicitly disabled by QEMU and
should be present in x86_64-cpuid-*-disabled.xml.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit v3.1.0-26-gd60012b4 started filtering hle and rtm features from
broken Intel Haswell CPUs. QEMU implemented similar functionality and
thus it doesn't report rtm and hle features as enabled for Core i5-4670T
CPU anymore.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Generated with

    (cd tests/cputestdata; ./cpu-cpuid.py diff x86_64-cpuid-*.json)
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new command can be used to generate test data for virCPUUpdateLive.

When "cpu-cpuid.py diff x86-cpuid-Something.json" is run, it reads raw
CPUID data stored in x86-cpuid-Something.xml and CPUID data from QEMU
stored in x86-cpuid-Something.json to produce two more CPUID files:
x86-cpuid-Something-enabled.xml and x86-cpuid-Something-disabled.xml.

- x86-cpuid-Something-enabled.xml will contain CPUID bits present in
    x86-cpuid-Something.json (i.e., enabled by QEMU for the "host" CPU)

- x86-cpuid-Something-disabled.xml will contain all CPUID bits from
    x86-cpuid-Something.xml which are not present in
    x86-cpuid-Something.json (i.e., CPUID bits which the host CPU
    supports, but QEMU does not enable them for the "host" CPU)
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new script is going to be more general and the original
functionality can be requested by "cpu-cpuid.py convert".
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Let's make the object local to the parseFeatureWords function which uses
it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The public API flags are handled by the cpuBaselineXML wrapper. The
internal cpuBaseline API only needs to know whether it is supposed to
drop non-migratable features.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

cpuBaseline is responsible for computing a baseline CPU while feature
expansion is done by virCPUExpandFeatures. The cpuBaselineXML wrapper
(used by hypervisor drivers to implement virConnectBaselineCPU API)
calls cpuBaseline followed by virCPUExpandFeatures if requested by
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES flag.

The features in the three changed test files had to be sorted using
"sort -k 3" because virCPUExpandFeatures returns a sorted list of
features.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>