Move the structs into virinterfaceobj.c, create necessary accessors, and
initializers.

This also includes reworking virInterfaceObjListClone to handle receiving
a source interfaces list pointer, creating the destination interfaces object,
and copying everything from source into dest.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move the struct into virinterfaceobj.c, create necessary accessors, and
initializers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We're about to make the obj much more private, so make it easier to
see future changes which will require accessors for the obj->def

This also includes modifying some interfaces->objs[i]->X references to be
obj = interfaces->objs[i]; and then def = obj->def
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than using goto cleanup on object find failure and having cleanup
need to check if the obj was present before unlocking, just return immediately.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Alter variable names to be obj rather than 'iface' and/or 'obj'.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

SASL context would be initialized even if the corresponding TCP or TLS
sockets are not enabled.

fe772f24 attempted to fix the symptom by commenting out the settings,
but that did not fix the root cause. 3c647ee4 later reverted those
changes so that the more secure algorithm is used.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450095

qemuDomainGetBlockInfo would error out if qemu did not report
'wr_highest_offset'. This usually does not happen, but can happen
briefly during active layer block commit. There's no need to report the
error, we can simply report that the disk is fully alocated at that
point.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452045

The host address or the socket path have already been checked at the
begining of the function virStorageSourceParseNBDColonString(). So,
when the parameter is not a unix socket, there is no reason to check
the address again because if it does not exists, the logic will fail
in the first IF conditional.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

VIR_STRDUP returns -1 if the string copy was not successful. So, the
current comparison/logic is throwing an error when VIR_STRDUP() returns
1. Only when source is NULL, it is considering as a success which is
not right.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

* docs/news.xml: updated for the release
* po/*.po*: regenerated

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In 48d9e6cd and friends we've allowed users to back guest
memory by a file inside the host. And in order to keep things
manageable the memory_backing_dir variable was introduced to
qemu.conf to specify the directory where the files are kept.
However, libvirt's policy is that directories are created on
domain startup if they don't exist. We've missed this one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Caused by commit @d1eea6c1 due to the missing symbol on older platforms.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

commit a8eba503 added further checking of the guest shutdown cause, but
this enhancement is available since qemu 2.10, causing a crash because
of a NULL pointer dereference on older qemus.

Thread 1 "libvirtd" received signal SIGSEGV, Segmentation fault.
0x00007ffff72441af in virJSONValueObjectGet (object=0x0,
                                             key=0x7fffd5ef11bf "guest")
    at util/virjson.c:769
769	    if (object->type != VIR_JSON_TYPE_OBJECT)
(gdb) bt
0  in virJSONValueObjectGet
1  in virJSONValueObjectGetBoolean
2  in qemuMonitorJSONHandleShutdown
3  in qemuMonitorJSONIOProcessEvent
4  in qemuMonitorJSONIOProcessLine
5  in qemuMonitorJSONIOProcess
6  in qemuMonitorIOProcess
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Callers expect the return value to be the total number of vcpus in the
host (including offline vcpus). The refactor in c67e04e2
broke this assumption by using virHostCPUGetOnlineBitmap which only
creates a bitmap long enough to hold the last online vcpu.

Report the full number of host vcpus by returning value from
virHostCPUGetCount().
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

When a number of SRIOV VFs (up to 128 on Intel XL710) is created:
for i in `seq 0 1`; do
  echo 63 > /sys/class/net/<interface>/device/sriov_numvfs
done

libvirtd will then report "udev_monitor_receive_device returned NULL"
error because the netlink socket buffer is not big enough (using GDB on
libudev confirmed this with ENOBUFFS) and thus some udev events were
dropped. This results in some devices being missing in the nodedev-list
output. This patch overrides the system's rmem_max limit but for that,
we need to make sure we've got root privileges.

https://bugzilla.redhat.com/show_bug.cgi?id=1450960Signed-off-by: Nning.bo <ning.bo9@zte.com.cn>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The @cpus is allocated by virFileReadValueBitmap() but never
freed:

==21274== 40 (32 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 808 of 1,004
==21274==    at 0x4C2E080: calloc (vg_replace_malloc.c:711)
==21274==    by 0x54BA561: virAlloc (viralloc.c:144)
==21274==    by 0x54BC604: virBitmapNewEmpty (virbitmap.c:126)
==21274==    by 0x54BD059: virBitmapParseUnlimited (virbitmap.c:570)
==21274==    by 0x54EECE9: virFileReadValueBitmap (virfile.c:4113)
==21274==    by 0x5563132: virCapabilitiesInitCaches (capabilities.c:1548)
==21274==    by 0x2BB86E59: virQEMUCapsInit (qemu_capabilities.c:1132)
==21274==    by 0x2BBEC067: virQEMUDriverCreateCapabilities (qemu_conf.c:928)
==21274==    by 0x2BC3DEAA: qemuStateInitialize (qemu_driver.c:845)
==21274==    by 0x5625AAC: virStateInitialize (libvirt.c:770)
==21274==    by 0x124519: daemonRunStateInit (libvirtd.c:881)
==21274==    by 0x554C927: virThreadHelper (virthread.c:206)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

 - Include virerror.h for virReportSystemError
 - Rename stub functions to match original function names

Mention CCW and fc_remote_port capablities in the news.xml file.
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.

An example for a virsh nodedev-dumpxml:

    virsh # nodedev-dumpxml scsi_target0_0_0
    <device>
      <name>scsi_target0_0_0</name>
      <path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path>
      <parent>scsi_host0</parent>
      <capability type='scsi_target'>
        <target>target0:0:0</target>
        <capability type='fc_remote_port'>
          <rport>rport-0:0-0</rport>
          <wwpn>0x9d73bc45f0e21a86</wwpn>
        </capability>
      </capability>
    </device>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

We will need some convenient helper functions for managing sysfs-entries
for fibre channel-backed devices. Let's implement them and make them
available in the private API.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.

Topologically, CCW devices are similar to PCI devices, e.g.:

    +- ccw_0_0_1a2b
        |
        +- scsi_host0
            |
            +- scsi_target0_0_0
                |
                +- scsi_0_0_0_0
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Unlock @obj in case of an error too.
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Since the switch statement is already using the deref'd @cap variable
and the VIR_NODE_DEV_CAP_NET case uses it, the SCSI_HOST and PCI_DEV
cases may as well use it too.
Suggested-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host.  We should
forward that information along, at least for shutdown events.  Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used.  It can be added later on.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The number of records that virConnectGetAllDomainStats can return per
domain is currently limited to 4096.  This is quite low -- for
example, a single guest with ~320 disks will hit this limit.  This
increases the limit to make it much larger.  Note that
VIR_NET_MESSAGE_MAX still protects the total message size in the case
where there are many domains and many disks per domain.

I tested this using a guest with 500 disks with no issues.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1440683

When increasing the buffer size up to VIR_NET_MESSAGE_MAX, we
currently quadruple it each time.  This unfortunately means that we
cannot allow certain buffer sizes -- for example the current
VIR_NET_MESSAGE_MAX == 33554432 can never be "hit" since ‘newlen’
jumps from 16MB to 64MB.

Instead of quadrupling, double it each time.

Thanks: Daniel Berrange.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

Commit 4337bc57 introduced code that would in certain error paths
unref the last reference of a pointer, but return it.

Clear the pointers before returning them.

@tmp is leaked after the second call to virVHBAGetConfig within
virVHBAIsVportCapable code block because it wasn't freed after making the
first call to the function.
Signed-off-by: NYi Wang <wang.yi59@zte.com.cn>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The @ipv6_host allocated in virAsprintf may be lost when virAsprintf
addrstr failed.
Signed-off-by: NYi Wang <wang.yi59@zte.com.cn>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

There is a VIR_FREE after a return statement. That code section is never
executed and for this reason the "tty" variable is not being freed. This
commit rearranges the logic.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

This commit fixes an acl missing variable. The virt-acl.m4 inside the
macro directory does not contain the variable 'with_acl'. So, it is
being set as an empty string "with_acl=''". This is causing a missing
option during the configuration, even if you have acl libs installed.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

This option turns on extended interrupt mode,
which allows more than 255 vCPUs.

https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Add an attribute to control extended interrupt mode.

https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1374126

Due to how the processing for authentication using polkit works, the
virshConnect code must first "attempt" an virConnectOpenAuth and then
check for a "special" return error code VIR_ERR_AUTH_UNAVAILABLE in
order to attempt to "retry" the authentication after performing a creation
of a pkttyagent to handle the challenge/response for the client.

However, if pkttyagent creation is not possible for the authentication
being attempted (such as perhaps a "qemu+ssh://someuser@localhost/system"),
then the same failure pattern would be returned and another attempt to
create a pkttyagent would be done. This would continue "forever" until
someone forced quit (e.g. ctrl-c) from virsh as the 'authfail' was not
incremented when creating the pkttyagent.

So add a 'agentCreated' boolean to track if we've attempted to create the
agent at least once and force a failure if that creation returned the same
error pattern.

This resolves a possible never ending loop and will generate an error:

error: failed to connect to the hypervisor
error: authentication unavailable: no polkit agent available to authenticate action 'org.libvirt.unix.manage'

NB: If the authentication was for a sufficiently privileged client, such as
qemu+ssh://root@localhost/system, then the remoteDispatchAuthList "allows"
the authentication to use libvirt since @callerUid would be 0.

'param' contains the correct element from 'params'.

If the group name would not be the first parameter libvirtd would crash.

Introduced in c53bd25b.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1455510